Company Logo Tractor Shed Logo Parts for Old Tractors
Click Here or call 800-853-2651

Antique Allis Chalmers Tractor: AC WD45

[Allis Chalmers WD45 Parts]     [Return to the Shed]

This tractor was one of Allis Chalmers' best-known tractors. It was very similar in appearance to the Model WD but had 25% more horsepower. The Snap-Coupler hitch system became standard equipment in 1954. A diesel engine was also offered beginning the same year. In 1956 it became the first AC tractor to have power steering. A total of 90,382 of these tractors were produced.

AC WD45 Tractor

Do you have any comments or questions about this tractor? Ever use one? Know anyone who owned one? If so, please join in on the discussion below. Use the form for entering your comments.

Comments on this Tractor

Stan wrote on Thursday, November 28, 2013 (PST):
  • How do you remove the radiator from the grill on a wd allis it has the fins in front of the radiator also
    Jon wrote on Monday, July 09, 2012 (PDT):
  • Has anyone else heard of a WD - WD45 crossover model I have a 1953 wd-wd45 crossover ive been told in early 1953 between serial number s ; WD-131243 and WD-146607 they produced a tractor with parts from both the wd and wd45. I acually owen a wd-wd45 with a serial number in the middle of the two listed above. Does anyone know where i could find either parts or parts tractor in that serial number series I may be interested in another running one in that series.
    Mike Monnin wrote on Tuesday, July 03, 2012 (PDT):
  • My Grandpa FJB had 2 WD 45 Allis Chalmer tractors and did all of his farming with them. I loved the tractor and really enjoyed the Hand Clutch and the great way it drove! Give me AC orange and forget about the Green Ones !!
    Lloyd Sorlien wrote on Wednesday, May 09, 2012 (PDT):
  • I still have a wd45. runs good. we use it in tractor pulls. It is all stock but pulls good. When we bought it it was our main tractor. We said we had the world by the tail. Pulled a 3=14 mounted plow in 3rd. gear most of the time
    Farmer bill wrote on Monday, April 30, 2012 (PDT):
  • Need a wiring diagram for wd. anyone
    don knight wrote on Saturday, April 21, 2012 (PDT):
  • does anyone now about how many wd single front wheels were made.I have one but dont know if its worth restoring
    j.w.freck wrote on Saturday, February 11, 2012 (PST):
  • looking for a complete power steering unit for a 903-930-1387
    dale buecker wrote on Wednesday, April 13, 2011 (PDT):
  • Eh. MY family had nothing but problems with the wd45. we have botht the wd and the wd45. The wd outperforms the 45. Kinda strange . oh well poop on me ;
    Jim wrote on Wednesday, October 06, 2010 (PDT):
  • The loader on my WD allis is lifts real slow since I had the hyd pump rebuilt. Also when I try to lift a bucket of dirt or snow it will sometimes lift a few inches and stop Any Thoughts
    Jaco Combrink wrote on Tuesday, May 25, 2010 (PDT):
  • Noticed that there are several quieries wrt AC models. Go to the web site under Allis-Chalmers Serial Numbers and follow the steps to get your required info. Hope this will assist. I m the proud owner of an AC WD45 1955 that I restored recently. Regards to all AC fans - Jaco Combrink South Africa Cell +27 836572339
    Larry Hainlen wrote on Wednesday, March 31, 2010 (PDT):
  • Mr. Trosen I hav e allis WD45 with serial # 227508 And it is 1956 gas. I live in La Vergne Tn.and you are welcom to call me anytime at 615-476-6897 anytime. My name is Larry Hainlen.
    Larry Trosen wrote on Tuesday, March 30, 2010 (PDT):
  • i have an allis chalmers tractor, from the pictures i have looked at its looks to be a wd. the serial number on the left back side of the differential is D227808. I would like to know what year and model for sure to get info for repairs. thanks for your help
    Larry Inman wrote on Saturday, March 20, 2010 (PDT):
  • I need some help. I have an old wd 45 that has a need for parts but using the serial# off the rear it dosen t seem to exist. If you would please look at this # and tell me if you can find wd234365-----this is stamped on the left side...thanks so much for your help
    rp wrote on Thursday, December 17, 2009 (PST):
  • my 50 WD has the tractor serial # on top flange/machined surface of rear axle near left brake cover. Engine has its own # on left side between carb aircleaner bowl. They generally Run,steer,and pull better than it has any right to.
    Bill wrote on Friday, November 13, 2009 (PST):
  • I have a wd tractor and can t find the serial number, i have looked on the back trans. housing but can t seem to find it. can any one shed some light on it
    Leo wrote on Saturday, October 31, 2009 (PDT):
  • I have a WD-45 with loader. It has a after market wide front end. I need the bushing that go into the spindle support. dose anyone know where to purchased them
    Lyle L. Hertel wrote on Saturday, October 10, 2009 (PDT):
  • I have a 1956 WD45 that has been in the family since my dad started farming in 1956. It has a Model 33, 2 row, tractor mounted corn harvester. Does anyone know if parts like bearings are still available.
    j.w.freck wrote on Saturday, August 29, 2009 (PDT):
  • the front end parts are off a 45d.i failed to mention that
    j.w.freck wrote on Saturday, August 29, 2009 (PDT):
  • i have a complete front steering box and front row crop spindle for sale complete with hubs
    j.w.freck wrote on Saturday, August 29, 2009 (PDT):
  • looking to add to my collection of allis wd45.have 5 already but would like to find another 45d.anybody got one for sale,email me thx j.w.freck 903-930-5679
    Tom Brazeau wrote on Wednesday, June 24, 2009 (PDT):
  • I know of an allis in my grandmother s posession with the exact serial number as that in front of the gearshift. i was wodering if i could get info on the tractor. it is gasoline powered, has four speeds, no powersteering, and a two point hydraulic hitch with snaps
    katherynso wrote on Thursday, June 04, 2009 (PDT):
  • relation inc years findings components case
    jonny b wrote on Thursday, March 19, 2009 (PDT):
  • need a wiring diagram to con vert 6v pos ground to 12v neg.ground thank you
    RON REEDY wrote on Wednesday, January 28, 2009 (PST):
    alex wrote on Friday, January 23, 2009 (PST):
  • If you need to find out what year your tractor is then look towards the back of the tractor. There should be several numbers, these are on the flat area that is around the snap-on arm bracket. Hoped I helped.
    j.w.freck wrote on Tuesday, December 30, 2008 (PST):
  • to melissa ryks..... try eagle lakes tractor parts in eagle lake texas,for ur 45 wheel weights
    Melissa Ryks wrote on Wednesday, December 10, 2008 (PST):
  • Looking for wheel weights for a WD-45 Alice...anyone know where I should be looking
    Kenneth Goodin wrote on Friday, November 28, 2008 (PST):
  • Just ran across this interesting forum, and saw where Jerry Geisert wanted info on power steering back in 2001. Jerry, if you re still on here, contact me at bgoodin at I might have just what you re looking for.
    Roger Pierce wrote on Tuesday, July 08, 2008 (PDT):
  • Tiffany, who wrote on june 4th 08. I am interested in your tractors if you would please e-mail me or call me at 439-241-1335
    Tom wrote on Wednesday, June 25, 2008 (PDT):
  • Hi, new to the tractor lifestyle here. Just got a 1957 Allis Chalmers WD45 wide-front/gas. What type and weight of oil, hydraulic fluid, transmission fluid, etc. do I use for this machine, thanx.
    Tiffany wrote on Wednesday, June 04, 2008 (PDT):
  • I have an older model Allis chamlers tractor that was my granddas and it needs work done to it.Where would be a good place to sell this antique tractor Any collectors I believe its a WD45 late 50 s early 60 s.Thank you
    dudley tree wrote on Sunday, June 01, 2008 (PDT):
  • i recently bought a wd 45 was wondering if it came with power stering if so
    Dave King wrote on Monday, March 10, 2008 (PDT):
  • WANTED I am looking for a 1954 wd-45 Diesel s/n 181341-190993.
    john wrote on Monday, February 04, 2008 (PST):
  • i have an old 1949 allis chalmer WD 45 and it has been in my family for 3 generations and it is still running perfect
    T. M. Stroup wrote on Wednesday, January 30, 2008 (PST):
  • We have two WD-45s on our farm. One was made in 1953 and was restored by my grandpa in 97. It was a wedding present to grandpa from his dad. He liked it so much he bought another one brand new in 1954. It has a loader on it. Both have narrow fronts and have been in the family since they were new.
    Kelli Siegman wrote on Wednesday, November 14, 2007 (PST):
  • I am selling a 1952 Allis Chalmers WD it needs a paint job but it runs perty well.The price will be 1000 OBO. Don t be afraid to halla at me because its a good deal!!!
    Jerry wrote on Saturday, November 03, 2007 (PST):
  • Have a WD45 and need Information and parts location for the Hydroliac pump for the lift and any other information on how to overhaul any info will be appreaceated
    justin mccain wrote on Tuesday, October 30, 2007 (PST):
  • any idea where i can find an AC WD45 close to kentucky possibly tricycle type
    Robert Edwards wrote on Monday, October 29, 2007 (PST):
  • I will sell parts off these 5 tractors. 252-478-4178
    Robert Edwards wrote on Thursday, October 25, 2007 (PDT):
  • I have 5 WD and WD45 junk tractors and I would sell all for 2500.00, probably could put 3 together with motor rebuilds.
    Nancy wrote on Wednesday, October 24, 2007 (PDT):
  • have a wd rowcrop tin /tires good what may it be worth
    Dan March wrote on Monday, October 15, 2007 (PDT):
  • I have my dads very first tractor he ever bought an AC-B . One of my very first memories of my dad and I spending time together was time on that big-little B-tractor. I was in high-school before I got around to doing anything with that tractor, but finely did get it running and loved every minute of it. After that, I ended up being hooked on Allis Chalmers Tractors. The very first tractor on the farm that my Grate Grandfather was able to afford was an AC-WC. Many years later, my Grandfather purchased an AC-WD45. Growing up I have many fond memories of on that WD45, making Hay in the summer, collecting sap in the snow for Maple Syrup, and fire wood when ever we had time to do it. Now with my Grandfather gone for some time and my dad with his small fleet of Case Tractors, the WD has been greatly neglected. But good news for the old Allis, I inherited it. She needs allot of work, new rebuilt engine, new rims and tires and some other small items that would make it a real prize on my Wife and I s farm. But after trying to get some info to fix it, I have found that I don t know as much about that tractor as I thought. Like were the best place to get good parts, or what Torque to Wheel Rating it has. If any on could help me out to get started, It would be greatly appreciated. Also would like to know what the Torque to Wheel Rating the WC and the B has also.
    kevin salmi wrote on Friday, October 12, 2007 (PDT):
  • I have an Allis WD Tractor For Sale. 1949,50 Narrow Front. It has been all painted.Looks nice,Runs nice. Has new rear tires, new battery. Also it has 3-Point Hitch Set up. And live power. Sheet metal,and overall tractor looks real nice. Asking 2,300 obo. Also i have a WD Tractor For Sale for parts. Call or e-mail me. 1-906-3566573 Located in Upper Michigan.
    STEVE wrote on Sunday, August 19, 2007 (PDT):
    tim brown wrote on Thursday, July 26, 2007 (PDT):
  • I have a WD-45 with a sngle fornt wheel are these common or not, I havnt found another like it.
    william maljaars wrote on Tuesday, June 26, 2007 (PDT):
  • hello im looking for a wd45 diesel if you have won plaese contact me
    judy wrote on Monday, June 04, 2007 (PDT):
  • im looking for a front end tricycle parts
    judy wrote on Monday, June 04, 2007 (PDT):
  • im looking for a front end tricycle parts
    Kobud Kuyler wrote on Sunday, May 20, 2007 (PDT):
  • I m restoring a WD45 and would like to know where I could get a complete starter. Any-one with info
    Okie Allis fan wrote on Sunday, May 06, 2007 (PDT):
  • Was wanting to put new points in my 1955 WD45....the new points has a weird looking gadget half way down the shaft that the cuurent points don t have and when I put the points in they are far too open.......HELP
    Dustin Ranallo wrote on Friday, April 06, 2007 (PDT):
  • I own a wd-45 and in the process of restoring it and I was wondering were I could find repro fenders,and hood at reasonable prices
    Russell Boseck wrote on Friday, March 30, 2007 (PST):
  • I have a 1951 wd45 can i put on power stering on or not if any one knows let me know.
    j.w.freck wrote on Sunday, March 18, 2007 (PST):
  • i am looking for a allis chalmers wd45 gas,wide front end,good tin and no welds in the major structures block,differential and such to restore.we had 3 of them on the farm in indiana.would like the texas,oklahoma ark la.area.will consider any area on a good buy
    dallas gronefeld wrote on Thursday, October 05, 2006 (PDT):
  • need help ;did ac have a front weigth bracket for the flat weigths like the d17 se.1v had?
    B.J. Wolf wrote on Friday, September 29, 2006 (PDT):
  • I am restoring an AC WD45 and want to repaint it. I am just wondering the paint scheme of the grill because this tractor has a white grill. If someone could help me out on the colors in accordance of the years manufactured.
    R.A. Waldon wrote on Tuesday, September 12, 2006 (PDT):
  • Does anyone know the gear ratio of a Allis Challmers WD & WC.
    KELLY ONEAL wrote on Thursday, September 07, 2006 (PDT):
    jerry beebe wrote on Wednesday, September 06, 2006 (PDT):
  • I bought an ac wd. Serial #wd73147. The number on the engine is wd279941ga (the g could be a 6 or an 8). Any way to tell what year it was made?
    D.J. Mickens wrote on Friday, June 23, 2006 (PDT):
  • I am looking for a front end loader for a WD-45. Are there any available in the Ohio area?
    emmanuel wrote on Tuesday, May 23, 2006 (PDT):
  • mobilephone_shop2006 at Nokia 6020 tri-bank edge gsm/gprs $224.99 Nokia 7610 tri-band gsm/gprs $324.99 Nokia 9500 tri-band pda gsm/gprs $724.99 Nokia 6822 gsm/gprs phone $274.99 Nokia 6650 $180usd Nokia 6670 smart phone $200usd Nokia 6820 $190 Nokia 7200 $195usd Nokia 9300 $220usd Nokia 7250i $175usd Nokia 8800 ...$220usd Nokia 9210i communicator $160usd Nokia 9500 communicator$260usd Nokia 9300 communicator..$200usd Nokia n-gage $180usd Nokia n-gage qd.$200usd Nokia n92 $280usd Nokia n91 $200usd Nokia n90 $170usd Nokia n70 $160usd Nokia 1100-- 100 USD Nokia 2100-- 100 USD Nokia 2300-- 120 USD Nokia 3100-- 145 USD Nokia 3108-- 140 USD Nokia 3200-- 140 USD Nokia 3230-- 140 USD Nokia 3300 - 140 USD Nokia 8910 Titanium-- 180 USD Nokia 8910 Black-- 185 USD Nokia 8910i--185 USD Nokia 8890-- 170 USD Nokia 8850 Special Edition-- 155 USD Nokia 8850 Gold Edition-- 140 USD Nokia 8855-- 145 U
    nate wrote on Friday, May 12, 2006 (PDT):
  • it is great
    nate wrote on Friday, May 12, 2006 (PDT):
  • it is great
    nate wrote on Friday, May 12, 2006 (PDT):
  • it is great
    nate wrote on Friday, May 12, 2006 (PDT):
  • it is great
    nate wrote on Friday, May 12, 2006 (PDT):
  • it is great
    nate wrote on Friday, May 12, 2006 (PDT):
  • it is great
    nate wrote on Friday, May 12, 2006 (PDT):
  • it is great
    KELLY ONEAL wrote on Sunday, May 07, 2006 (PDT):
    ROSCOE wrote on Sunday, April 23, 2006 (PDT):
  • I have a 1954 wd45, with a loader that I installed. I set up my tractor so it would operated as live hydraulies. I had a valve built to control lift and bucket. Bucket is two way pressure and the lift is up pressure only. Once I went through the valve I installed I lost pressure, I have jacked the pressure setting on the valve in as far as it will go. I know these systems are high pressure,what is a good number on pressure, or any other thoughts.
    John Brown wrote on Monday, April 17, 2006 (PDT):
  • I'm A queer and I'm looking for a vintage 50's man. I like those wrinkly old balls. Lets make love in the hay loft. I love farmers who are fat and wear tight little wranglers with speedos. give me some lovin'.
    Jamie wrote on Sunday, April 16, 2006 (PDT):
  • I have a 1958 AC wd45... Does any one know what it could be worth?
    Melvina Prescott wrote on Wednesday, April 05, 2006 (PDT):
  • I have an AC 1955 wd-45 for sale for $1500.00. It runs good but does need a little starter work done on it. It also has a lift/bucket on it. 620-569-2563
    dalton wrote on Monday, April 03, 2006 (PDT):
  • i have a allis chalmers wd45 and i have a loader for sale for 150 obr i live in il in amboy
    Donna (NE) wrote on Tuesday, March 21, 2006 (PST):
  • Have a WD that I use for antique tractor pulling and is a pretty good little puller. Engine hasn't been touched. I also used a WD45 on the farm when I helped my dad when still in school. Maybe that is why I like the WD for pulling.
    Randy Cole wrote on Saturday, March 18, 2006 (PST):
  • I have a WD45 and need a shift assembly for a 4 speed with a curved shift lever.Any help would be greatly appreciated.
    Gary Kirby wrote on Monday, March 13, 2006 (PST):
  • I have a WD45 in Oklahoma. I have the side belly 9' sickle mower, disk, springtooth, 3/14 plow and 2/16 plow all with original hookup. The tractor is on propane, with wide front end runs great, has been shedded. Listed on my auction April 3. If interested in other info give me a call Gary Kirby 918 740 3572. I believe you can bid on line.
    Dave (NE) wrote on Wednesday, March 08, 2006 (PST):
  • Dan, where are you located and how much do you want for the cultivator and plow? Email me. I tried to email you, but apparently your email was not working. Dave
    Shawn L. Austin wrote on Saturday, February 25, 2006 (PST):
  • Hello my name is Shawn,and I have one of these tractors sitting in my yard.It was called a ditch digger,because it came equipted with a push blade on the front and a backhoe on the rear.I believe mine is a 1955.It is suppose to be my restore project,but may have to wait until I retire.
    Dan Frieden wrote on Friday, February 24, 2006 (PST):
  • I have a 2-row a/c cult.and a 3-bottom snap coupler plow. The plow has been in a shed. If interested please contact me. Thanks Dan Frieden
    Mel Heimann wrote on Monday, February 20, 2006 (PST):
  • Does any body know if the short stubb shaft that the hand clutch lever slides on can be removed and replaced as mine is worn to much.thanks if someone knows how to remove it
    Leonard wrote on Thursday, February 02, 2006 (PST):
  • MOVING I have 52 W-D 45 wide front for sale! Excellent condition. Pretty much completely restored. Call 775-340-0886 Northeastern Nevada
    Ken wrote on Friday, January 27, 2006 (PST):
  • I have a AC WD 45 with wide front end and also dual fuel for gas and butane. My granddad bought it new and now I would like to find someone that could restore to new again. It still runs just needs refurb.
    Dave (NE) wrote on Tuesday, January 24, 2006 (PST):
  • Jim, you may want to check with Lyle Wacker. He sells decals and may either sell you what you need or inform you of what the decal says. 402-582-4874 Osmond, NE. I think he has a web site, also, but can't remember what it is.
    Jim wrote on Thursday, January 19, 2006 (PST):
  • I have a AC WD45, I need to know what the lift settings are, that are printed on the side of the Battery case. My case needs to be rebuilt and I can't read all of the settings. If any one could send me what they say I could print one and stick it back on the case when I get it rebuilt. Thanks
    Dave (NE) wrote on Thursday, January 19, 2006 (PST):
  • The crooked gear shift normally indicates that it is a WD45. Some of the late WD's came out with the crooked gear shift, but if your's is straight, it is probably a WD. Also, can check the engine. The WD had a plate on the right side, while the WD45 did not.
    kwahl1 wrote on Friday, January 13, 2006 (PST):
  • 2 questions. The crooked gear shift, is that an indicator of a WD model. Mine is straight, gasoline but looks very similar. Also the front tires. Mine are like that, one straight tread, one truck tire looking. Normally like that?
    BGip wrote on Friday, January 06, 2006 (PST):
  • Steve - is this the road grader version of the AC you were wondering about? Check;
    Dave (NE) wrote on Friday, January 06, 2006 (PST):
  • Check the YT Photo ads. There are two that have been listed over the past couple of days.
    Bob Pelham wrote on Tuesday, January 03, 2006 (PST):
  • I would like to purchase a ACWD45. Does anyone have one for sale? Thanks
    Liela wrote on Wednesday, December 21, 2005 (PST):
  • We have an Alice wd45 been in the family for many many years used to belong to my grandmother and in her later days my brother fixed it up some and used it for farm work and tractor pulls we have the original reciept from when she purchased it even. My brother takes great pride in Alice items but they are so hard to find if anyone has any isight on where to purchase mini tractors and other gear please let me know thank you !
    Lisa wrote on Monday, November 14, 2005 (PST):
  • Who built the allis chalmer square hay baler?? It apparently was built by someone other than A.C..
    Dwayne Cox wrote on Wednesday, October 19, 2005 (PDT):
  • if cant find head might trade or sell tractor has new radiator and engine gasket set .has wide front end. and loader ph. 606 287 1581
    dwayne cox wrote on Wednesday, October 19, 2005 (PDT):
  • i need a head for 1957 allis chalmers wd45 gas. ph.606 287 1581
    Dave (NE) wrote on Monday, October 17, 2005 (PDT):
  • Well, you are correct, Allis did make a grader as you describe. I've seen them at shows and pictures of them. Where to get on, is another question. I have seen them for sale, but not very often.
    Steve wrote on Sunday, October 16, 2005 (PDT):
  • I want to design a self propelled horse arena groomer. I have experience with WD's and WD45's. Didn't AC build a road grader version of this tractor with an elongated frame? What did they call it and where can I find one?
    KELLY AND DONNA ONEAL wrote on Sunday, September 18, 2005 (PDT):
    cody wrote on Tuesday, September 13, 2005 (PDT):
  • The first tractor my dad ever owned was a allis challmers and he loved that tractor a lot.
    Dave (NE) wrote on Thursday, September 08, 2005 (PDT):
  • You want persian orange #1, which is the 60080 number.
    Michael Krueger wrote on Tuesday, September 06, 2005 (PDT):
  • What is the correct paint color for my 1956 WD45 Allis? PPG shows two persian oranges. the numbers are 60080 and 60396. Does anyone know which is correct?
    elwood largey wrote on Monday, July 25, 2005 (PDT):
  • i have a very nice shape set of black hawk half tracks for the wd or wd 45. they are off a wd 45. all mounting brackets and bolts. no welded or cobbed parts. been stored since 1975. i am asking $1200 but i am open to offers.
    CHARLIE wrote on Saturday, July 16, 2005 (PDT):
    Allen Stanfill wrote on Wednesday, June 08, 2005 (PDT):
  • I have a wd45 tactor gas engine trycycle front end pto hydraulic lift snap coupler ECT. 12 volt Tractor looks bad but runs drives pto and hydraulics work Engine has or had a crack in the block behind carb someone patched before I got the Tractor but does not seem to affect the operation of the tractor and no leaks around area. I would like to sell tractor for $1200.00 dollars If any one is interested would be a great one to restore. Western KY area.
    Allen Stanfill wrote on Wednesday, June 08, 2005 (PDT):
  • I have a wd45 tactor gas engine trycycle front end pto hydraulic lift snap coupler ECT. 12 volt Tractor looks bad but runs drives pto and hydraulics work Engine has or had a crack in the block behind carb someone patched before I got the Tractor but does not seem to affect the operation of the tractor and no leaks around area. I would like to sell tractor for $1200.00 dollars If any one is interested would be a great one to restore. Western KY area.
    dfred wrote on Tuesday, June 07, 2005 (PDT):
  • I have found a WD with the serial # 45-26727G. I think this is a 1949 WD. Can anyone tell what the number 45 stands for in front of the serial numbers?
    FRANK GERMANY wrote on Tuesday, April 26, 2005 (PDT):
    Eric Assmus wrote on Thursday, April 14, 2005 (PDT):
  • I'm repainting a AC WD and there is a bracket behind the tail light on the left side. What is it supposed to hold?
    Dave wrote on Monday, February 21, 2005 (PST):
  • I used a Allis Charmlers tractor like this when I was a teenager. But they dont mention the hydrostatic type drive system which the diesel tractor that I used had
    Roger ottoman wrote on Thursday, February 17, 2005 (PST):
    Ozzie Osburn wrote on Sunday, January 30, 2005 (PST):
  • I think this is the machine I have, but I can't even spell "trakter". Can anyone advise where I will find model# etc. Engine # is 1274256 # on differental is129478. Thanks
    Johnny Broome wrote on Tuesday, January 18, 2005 (PST):
  • I have a 1950 model w.d. for sale all orginal needs to be restored asking 2,000.00 for it, also 1945 w.c all orginal great to restore 1,500.00. 1939 R.C. has been restored asking 8,500.00 moooresville n.c. 704-507-2017 thanks, johnny B.
    Matt wrote on Sunday, January 09, 2005 (PST):
  • What kind of alternator should i get for my WD 45? Just bought it and want to switch it over to 12 volt. What will i need to mount it to the tractor? Thanks
    Dean wrote on Friday, January 07, 2005 (PST):
  • I am looking for close up pictures of the governor linkage on both sides of a WD. I am trying to install my linkage back on. Can some one send me some pics of their WD for reference? Thank!
    Tim Kicker wrote on Tuesday, January 04, 2005 (PST):
  • Is the wd45 enough tractor to operate a new holland small square baler- nh274 I think?
    Carey Grzadzinski wrote on Tuesday, January 04, 2005 (PST):
  • I have a Allis Chalmers tractor. I bought it about 10 years ago and it worked great. A "friend" boroughed it and left it set in the field for about 6 years. I want to restore it but not sure exactly what model it is. There are many numbers on it. Engine-WP 281897-GA, frame rails 260870, by shifter I-LC-NP, case 200931, brake cover left AM 3834-7. Can anyone tell me year and model?
    Nash Summers wrote on Monday, January 03, 2005 (PST):
  • I'm looking for a WD45 Diesel. If anyone knows where I might be able to find one please let me know. I want one to restore. I have restored two WD's, 185 Diesel w/ Year-A-Round cab and a 190 XT Diesel. Thanks for your help.
    Paul Widmann wrote on Saturday, December 11, 2004 (PST):
  • I'm new to the AC family, so be nice. I just found the cutest WD 45 (gas). How much are these worth? I have not found a ser# tag yet, can someone tell me where that might be? The metal is almost perfect, it has a tricycle front end. Any help on this would be great. Thanks Paul
    Linus wrote on Wednesday, December 08, 2004 (PST):
  • Looking for a WD45 LP/gas and a WD45 diesel tractors for restoration projects for a Boy Scout and 4-H clubs. Also need a diesel engine for WD45 that is in progress. Thanks for your help
    Emil Rohland wrote on Tuesday, November 30, 2004 (PST):
  • John Doe needs a WD allis Magneto I have one plus many other parts for same also have carburetor and oilpump for 40 cockshutt
    CHARLIE wrote on Sunday, November 28, 2004 (PST):
    Rob Rozelle wrote on Thursday, November 25, 2004 (PST):
  • I am curently rebuilding an engine to a WD. The manual says .002-.003" bearing clearance for the mains and the rods. Can anyone tell me if this is correct? It sounded a little small to me. Other engines I have done have been more than this. Any help would be greatly appreciated. Thanks, Rob
    Keith wrote on Sunday, November 21, 2004 (PST):
  • Just bought a 1954 WD 45. Three questions. 1)Any suggestions on removing the steering wheel? 2)The gear shift knob is missing; there's only a steel bulge at the end of the shift lever. What should I do to get it back to original? 3)Are the decals supposed to be black or blue; I see both for sale? Thanks.
    Terry L. McLaughlin wrote on Friday, November 19, 2004 (PST):
  • Looking for loader,for my WD-45.
    Adam Christensen wrote on Wednesday, November 17, 2004 (PST):
  • I was wondering if anyone knew the value of a 1954 WD45 diesel I was looking to sell it It ran when parked 2 years ago and the body is in pretty good shape(no rust or dents)please email me If you can thanks.
    Linford wrote on Sunday, November 14, 2004 (PST):
  • Does anyone know the value of 1929 Centaur (2g) tractor. Great shape runs. Paint good ? ? ?
    Keith wrote on Thursday, November 11, 2004 (PST):
  • I recently purchased a WD-45 and plan to restore it. What kind of sand blasting equipment do I need for stripping it in preparation for painting? Do I need to take it all the way down to the metal? After stripping it, how do I prevent rust while working on other parts of the tractor? Maybe there's a good book that I should read. Any suggestionss?
    Bob Freije wrote on Friday, October 15, 2004 (PDT):
  • I have two 1953 WD45's narrow fronts. They run good and ready to work. PTO and Hydraulics live. Fenders rough but solid,all of tractor very restorable. One tractor has a working beltpulley.See pix on tractor pictures under 1953 WD45 with Beltpulley BFreije, or 1953 WD45 BFreije I would like $1800 each Call 317-852-7204.
    John o. wrote on Sunday, October 10, 2004 (PDT):
  • I have a WD-45 that was my uncles looking for a brush chopper w/snap coup.
    Jerry Carter wrote on Friday, October 01, 2004 (PDT):
  • I was fortunate to have relatives who farmed in Kentucky. I spent many a summer day from age 10 to age 17 working on the farms. Relatives on both sides of the family had Allis Chalmers tractors. The three models most used were the G, the WD45 and the D17. They all were put to use on the farm. The G had an underbelly mower attachment and had cultivator attachment. It was used to cultivate tobacco. The WD 45's and the D17 were used for the other farm work. I have fond memories of family and these tractors. In fact when I think of family, orange tractors come to mind as well.
    Scott Shotts wrote on Sunday, September 19, 2004 (PDT):
  • My late uncle cut timber several years ago. I was a young teenager at the time. He used a WD45 AC with a loader. I remmember the tractor to be a work horse. It would pull logs out of the woods that I would of never thought it would. My father purchased the tractor after his passing. He used it for many tasks. He had it for several years. He no longer needed it,so he sold it. I had many memories of that tractor. It was a wide front in. It had a add on power steering kit. I will always look back on days on that tractor.
    J wrote on Sunday, September 12, 2004 (PDT):
  • I'm 15 years old and just last year my grandfather, who happened to be the only one who knew anything about fixing stuff on the farm, passed away. I have been digging through the sheds cleaning and i have located what i believe to be this tractor. It is in a pretty bad shape but totally fixable. Could anyone send me advice to help fix this tractor up? I want it to look like the original.
    delbert ryan wrote on Sunday, September 12, 2004 (PDT):
  • i recently bought a allis chalmers wd doing web searches i,ve found just about every part for the tractor..but,where do i find a shifting lever for the transmission??plus the little pin that helps hold it in?? mine is worn and i should get a new one.i plan on restoring it to like new...thanks
    Joe Fuchs wrote on Saturday, September 11, 2004 (PDT):
  • I am looking for a good running WD-45,gas or diesel,doesnt have to be pretty just good running.If anyone can help me out please e-mail me.Thanks,
    Bob Hamilton wrote on Wednesday, September 08, 2004 (PDT):
  • I live near the Pacific Ocean in the State of Washington, and I'm interested in buying an A.C. WD45, preferably restored, or at least in pretty good condition. If you know of any, please contact me. I'd prefer to locate one within the Pacific Northwest, but I am willing to travel a reasonable distance. Thanks!
    arlin frank wrote on Wednesday, September 08, 2004 (PDT):
  • I just purchased wd-45. It is in good shape. Where do I find the serial number? What years were the wd 45 made? did they all have power steering? thanks
    Norman Beal wrote on Monday, August 23, 2004 (PDT):
  • I am looking for a 1955-56 WD45 with wide front end.
    Dennis wrote on Sunday, August 08, 2004 (PDT):
  • looking for wd45 and wd45 diesel.
    Robert Palmer wrote on Sunday, July 25, 2004 (PDT):
  • I have a 49 wd i recently blew the pto on it while using it to bale hay! Im looking for the pto assembly that bolts to the bottom of the transmission! Can any body part with one? thanks. would like to have tractor ready for the county fair!
    Marv White wrote on Thursday, July 08, 2004 (PDT):
  • I have a 49 model WD (gas), it's been setting for a year, and I would love to have someone take her off my hands for a reasonable offer. I am in the process of putting on a new rear wheel, and when I get the wheel stop, I'll have it back together. Wichita falls is north of Dallas TX any takers
    kevin wrote on Saturday, July 03, 2004 (PDT):
  • i am looking for an original light switch for a wd45. the switch also controls charging rate of the generator and the resistor is broke in mine. iwould like to keep it original as it belonged to my grandfather
    Scott Flegel wrote on Wednesday, June 23, 2004 (PDT):
  • I need to find crankshaft bearing clearances and torgue specs for a WD-45 (gas) Also oil pump clearance and gear endplay specs..would like to know where on the web I can find parts breakdown drawings of tractor components.. I`ve got to get this thing back into service, I am lost without it..Thanks to anyone that can help
    Jacob wrote on Monday, June 21, 2004 (PDT):
  • Dallas the WD-45 has exactly 40.47 H.P. I looked this up in a Nebraska Tractor tests book.I originally thuoght that it had 45 H.P. too. I was told that the 45 on WD-45 ment that it was a 45 H.P. tractor.
    Dallas wrote on Monday, June 14, 2004 (PDT):
  • the wd45 has 45hp i think
    charlie k wrote on Monday, June 07, 2004 (PDT):
  • i have an 1949 allis chambers wd runs good unrestored sheet metal in good shape stored in shed have not started yet this year good rubber owners manual this tractor is for sale all it really needs is paint if interested email me i live in southern pa thanks
    Raymond Barnby wrote on Thursday, May 13, 2004 (PDT):
    oscar wrote on Monday, May 10, 2004 (PDT):
  • I have an Allis Chalmers WD. Wiring is incomplete. Is there a website I could go to thats show me how to wire it up. Thanks.
    connie wrote on Wednesday, April 28, 2004 (PDT):
  • looking for a allis chalmers wd 45 live in pa will travel to pick up. thanks
    art lauer wrote on Monday, April 26, 2004 (PDT):
    M.J. Schmidt wrote on Saturday, April 10, 2004 (PDT):
  • I have a 1951-52 Allis Chalmers WD. It's in good condition and is being used for farm work. What would the current market price be for this piece of machinery?
    BILL 1946 wrote on Tuesday, March 23, 2004 (PST):
  • i have a wd45 allis i am looking for real and front wheels for it rear wheels have to be sliders also hood whith no dents midwest perfered.thank you BILL
    T.C. wrote on Saturday, March 20, 2004 (PST):
    T.Coley wrote on Saturday, March 20, 2004 (PST):
  • I have a WD45 Diesel.Doesn't look like much but runs great. Above the Serial number are the letters A-CR-KK;will someone tell me what this means? I also have a 1956 Case with a gasoline engine. Thanks !
    American Equipment Services wrote on Thursday, March 18, 2004 (PST):
  • I now have a 1955 WD45. Very clean runs good. I wonder if anyone has pictures of the different types of "Snap Couple" implements that Allis-Chalmers offered. I did not get any with my tractor and would like to purchase some. I also am looking at a 1954 WD45 that needs fenders were can I find good used ones ? Please E-mail me.
    Curt Hasselbacher wrote on Monday, March 15, 2004 (PST):
  • Does anyone know where I could find a WD-45 Diesel? This tractor caught my eye when I watched one plow at a local plow day last year. I need a powerful reliable chore tractor/showpiece, and a WD-45 Diesel would do very well. Everything else on the place is orange (no AGCO, all Allis) and using the 7080 for chores just doesn't work.
    Eric Schieferdecker from Ewing M.O. wrote on Sunday, March 14, 2004 (PST):
  • I am the president of the Gay Tractor Club in missouri and we are looking for new members and I am in need for a good looking (Deer) if you now what I mean. I need something that is used and needs alot of over hauling....
    Dave wrote on Tuesday, February 17, 2004 (PST):
  • Check the unofficial Allis site. Okieboy was either selling one or some parts for one. May be able to help you.
    Nash Summers wrote on Monday, February 16, 2004 (PST):
  • I am looking for a WD-45 Diesel wide frontend FOR SALE some where close to the southern part of Indiana. I currently have a WD, AC 185 diesel with Year-Around-Cab, and AC 190XT diesel that have all been restored. Looking for another restoration project.
    Jared wrote on Saturday, February 07, 2004 (PST):
  • I have a 54 WD-45, it has electric start, but one day i decided to crank her over by hand, that booger kicked me like a mule. Lots of compression.
    Gary Hughes wrote on Wednesday, February 04, 2004 (PST):
  • I have a 1950 WD which my granddad purchased new. Am starting to restore. I need to know what the weight of tractor is. Could any one provide that info to me? Thanks
    Bob wrote on Saturday, January 31, 2004 (PST):
  • Spent many hours working my grandfather's dairy farm on WD-45 and WD-45 Diesels.
    patrick stempel wrote on Friday, January 30, 2004 (PST):
  • i have a wd45 diesel. my grandpa bout it new.then my dad got it they worked it a lot. then the farm went under after geandpa died. the dealer got it back.then about 18ten years ago i bout the tractor. it nead a little work but it still runs stroung. and still in the famley.
    Jim Sandridge wrote on Tuesday, January 27, 2004 (PST):
  • Looking for a WD-45 Gas with tricycle type front end. Complete and repairable.We had one when I was a teen-ager. I would race it when the boss wasn't around. I would tie a string to the governer arm and pull it when I wanted high speed. I had a friend who could get ethyl alchol from his uncle's drug store. I mixed a quart of alky' with 2 quarts of gasoline. Had the muffler burnt out with our acetylene torch. Gutted.I could outrun all the local tractors except my buddy's Oliver 88" Diesel.His uncle's tractor. He made a injector to run kerosene into the intake.He would pull a string to let the kero in. we had 8-N'S ,77's M'S, H's, Some kind of M-M. We would run down this steep hill at night,wide open then let off the throttles. The WD 45 and the 88' diesel would shoot fire five feet in the air. The engines had to suffer,but in the late 40's kid's didn't think about it.The 88 diesel engine did a runaway one night. We were working on the homemade injector and dumped in 10 wt oil and kerosene mix. Way too much went in and the engine screamed for several minutes. We ran, thought the engine would blow.There is no shut down with all that in the intake. I'm 68 years old now and I wised up a little. Jim
    American Equipment Services wrote on Saturday, January 24, 2004 (PST):
  • I am looking for a good running WD 45 Allis Chalmers wide front with good working loader and other implements.I would like a 12 volt system maybe a late 50's. The tires and paint dont matter. Please contact me with price.
    Scott Spencer wrote on Sunday, January 18, 2004 (PST):
  • I have a WD-45 and would like to use a 3pt blade. Is there an attachment that I can buy to use 3pt hook ? Where can I buy these conversion Kits.
    doug wrote on Sunday, January 18, 2004 (PST):
    Ron Haertling wrote on Wednesday, January 14, 2004 (PST):
  • I thinking of buying an older WD45 to restore, wide front, beat up, burned values, bad foot clutch. Needs lots of work. What is it worth?
    RANDY RINDFLEISCH wrote on Monday, December 29, 2003 (PST):
  • Hi, I am looking for a good used transmission cover for my wd45 that includes the gear shift and forks. Mine keeps going out of gear because its so worn out. Can anyone help me?? Thanks alot! Randy Rindfleisch
    Don Hagen wrote on Wednesday, December 10, 2003 (PST):
  • Have a FULLY Restored 1948 WD-45 wide front ,gas. A beautiful little lady!!!!!!!!!
    Matt wrote on Thursday, December 04, 2003 (PST):
  • My dad and I own a nice looking Allis Chalmers WD 45. It has a narrow front on it but we are looking for a widefront. If anyone has one we will buy it off you if it is reasonable and in good working shape.
    john doe wrote on Sunday, November 16, 2003 (PST):
  • my buddy has a 1949 allis chalmers wd and i am looking for parts for him. I have lokked on several sites and have only found distributors. I need to find a magneto for it but cant find 1. Any1 out know where i can?
    dave powell wrote on Tuesday, October 28, 2003 (PST):
  • wanted to by WD45 diesd wide front axel too restor,please email price ect. regards davie
    Joe Liggett wrote on Friday, October 24, 2003 (PDT):
  • I just got a 1953 Wd45 and its in great shape,changed to 12 volt system, this tractor has the best pulling power of any tractor I've seen. I need to do one thing 4 gear has gone bad, it acts like it wants to go but will set there, other wise, one proud man, got a 3 point hitch with power lift, now I need a mower to put with it.
    michael wrote on Wednesday, October 01, 2003 (PDT):
  • I need to know were to get a conversion kit so I can use 3 point implements. Thanks
    Doug Dougherty wrote on Sunday, September 07, 2003 (PDT):
  • Looking for a WD45 gas, wide front end. Any condition considered. Reply via email, located in southern Indiana.
    Dave wrote on Friday, August 29, 2003 (PDT):
  • Yes, there is a 3pt snap coupler attachment that can be used on the WD-45. I have one and use it with my 3pt blade, but can also use it with other 3pt items.
    Mike Silbernick wrote on Thursday, August 28, 2003 (PDT):
  • I have owned a WD-45 wide front for 15 years. I would like to know if there is a conversion for the snap lock attachment so I can hook up a 3-point attachment. I also am wondering if there is a certain loader that fits directly to this tractor. It would be nice to be 4-way.
    johnie jones wrote on Saturday, July 19, 2003 (PDT):
  • we have a 1950 wd-45 and a 1948 wd. both have wide frond ends and are in great working order. as soon as i get it finished (hope fully in the morning) the wd-45 will be pulling a newholland superhayliner s68 baler. no idea on the bailer year but a bearing here and a bushing there and it should be as good as new. i found a superhayliner 67 for $75 buck I am using for parts but have no info on either one. Would appreciate any info on how to find info.
    Billy Croisant wrote on Sunday, July 06, 2003 (PDT):
  • Can comeone tell me what kind of oil you use in the hydraulic, transmission, and rear end for an AC WD45 tractor? Thank you.
    Mike Mulligan wrote on Saturday, June 28, 2003 (PDT):
  • CORRECTION FOR "DISTINGUISHING FEATURES BETWEEN WD AND WD45" Earlier I wrote that the WD had a hole in the side of the grill for a shutter to control "coolant flow". This shutter controls the "air flow" not the coolant. Also I wrote that the WD45 had traction booster with a traction booster gauge and the WD did not. Actually the WD did have traction booster, but I don't think it had the gauge. Sorry about that.
    Steve Risk wrote on Sunday, June 08, 2003 (PDT):
  • I have come across a WD narrow front end with a front end loader and trip manure bucket. it is an older restoration. Paint is good and everything seems to work. If anyone would be interested in it I am in Lancaster, Pa. let me know.
    Larry Wilkinson wrote on Sunday, June 08, 2003 (PDT):
  • For Sale WD-45 1955
    Mike Mulligan wrote on Sunday, June 08, 2003 (PDT):
  • DISTINGUISHING FEATURES BETWEEN WD AND WD45. These tractors are very much alike, almost identical, but there are a few ways to tell the difference. If your tractor is original this shouldnt be a problem. The easiest way to tell for sure is to look for the serial number which is located on the back of the tractor above the step on the back of the differential housing. Before the number it will say either WD or WD45. Thats easy enough. There are other differnces. Starting from the front of the tractor and working your way back; Many of the WDs had a small hole in the right side of grill that surrounds the radiator. This hole was for a shutter that controled the flow of coolant to make the engine run hotter or cooler. 45s usually didn't have this. The hole is located almost at the top on the right side of the radiator(not on the wire mesh grill in front but just around the corner on the side. A much larger differnce is the engine. WDs had a 201 cubic in engine that was usually equiped with magneto ignition. The WD45 had a 225 cubic inch engine which usually had a distributer ignition. The hydrolics were similar but the WD45 had traction booster and there was a gauge below the gas tank that said traction booster on it an when you lifted something you can see the needle on the gauge move. Another big differnce is the transmission however there is an exception. WDs prior to 1953 had a sliding gear transmission with a straight shift lever. In 1953, the last year for the WD and also the first year for the WD45 the transmission was changed to a constant mesh transmission which had a curved shift lever. The WD45 had snap coupler as standard equipment and the WDs did not. However snap coupler kits were made available for the WD so it is not uncommon to see a WD with snapcouple. I hope this information is helpful. It is correct to the best of my knowledge but remember there can be exceptions, especially if the tractor is not original. These tractors are so much alike and many parts can be interchanged. You may find out that half of you tractor is a WD and the other half is WD45. I have a WD45 with a D17 engine and a WD transmission and rear end. GOOD LUCK!
    Mike Mulligan wrote on Sunday, June 08, 2003 (PDT):
  • We have a WD-45 on our farm that we use alot. This tractor is unique because it is 3 tractors in one. After the original engine bit the dust, an engine from a D17 was put in because it was cheaper. So now it has more power and is faster on the road and also on the pto because the governed engine rpm is now 1650 compared to the original rpm of around 1400. Also after many years the transmission jumped out of gear(a common problem with allis chalmers). So we put the transmission of a WD on our tractor. The WD used a sliding gear transmission which after years of grinding and abuse will not jump out of gear(I know because we also have a WD and that has never jumped out of gear). However in 1953 the WD transmission changed to a constant mesh transmission that was also used on the WD45 which came out later in the same year. These transmissions had the curved shift lever instead of the straight lever of the previous transmissions, and these will jump out of gear. Allis tractors made after the WD45 up until the 7000 series tractors all(almost all)had this problem. The reason for this is usualy due to grinding the gears. When the transmission is new the teeth that engage when you select a gear have square edges on them. However if you grind the gears these edges become rounded off causing a curved edge which allowes the "collar"(I am not sure of the correct name of this part but it connects the gear to the output shaft) to slide off of the gear, putting your transmission into neutral. If you have an Allis that does not jump out of gear, be gentle and take you time so you do not grind the gears and it probably never will jump out. We also have an Allis Chalmers 200(probably my favorite tractor) that my dad bought used in the mid to late 80s. This tractor did not jump out of gear when he first got it. Unfortunately my grandfather and uncle always ground the gears when they drove it and it wasn't long before it jumped out of all the gears and the past few years we hardly used it. This past year my dad had the transmission rebuilt(which was very expensive) and now it is like a new tractor. We want to keep it this way so my dad and I will be the only ones driving it. On our farm we have all Allis Chalmer; WD, WD45, CA, D17, D19, 200, 7020, and a 6080. Anyone who wants to know the year of their WD or WD45 look for the serial number on the back of the tractor above the step on the differential housing. I have a book that tells the production information like what serial numbers were made in what year. If you get a book like this or if you go to an Allis Chalmers dealer you should be able to find out the year of your tractor if you have the serial number.
    Max wrote on Friday, May 30, 2003 (PDT):
  • Bill-I'm always looking for AC parts for my 2 WDs. How about a set of snp coupler claws? Seat? Fenders? Battery box? Anything usable!
    Mike Schmidt wrote on Saturday, May 03, 2003 (PDT):
  • I am looking for a WD 45 wide front. Must be good running condistion 517-541-9647
    BILL wrote on Thursday, May 01, 2003 (PDT):
    Leo mc dermott wrote on Friday, April 18, 2003 (PDT):
  • Does anyone have a good web site for tractor pulling results for wd's and wd45's
    brandon langford wrote on Sunday, April 06, 2003 (PDT):
  • I need a good set of used or new fenders for a wd45 i also need a good grill for wd45.
    Philip Fiskness wrote on Sunday, March 02, 2003 (PST):
  • I have been restoring Allis Chalmers tractors for 13 years and am looking for a hood for a WD 45 diesel tractor.Was raised on a farm have a long history of AC tractors.
    Ryan wrote on Wednesday, February 26, 2003 (PST):
  • Well I just got Allis home today buut I'm having trouble finding the serial number. Can somebody tell me exactly where to find it?
    Ryan wrote on Tuesday, February 18, 2003 (PST):
  • A friend of mine is giving me a wd45 in exchange for some work. can anybody give me some information on where to find parts or decals? Any ideas on where I can get new gears for the transmission?
    Gary Wattier of Wylie, Tx wrote on Saturday, February 08, 2003 (PST):
  • I also want to give you all the year which these tractors were built. 1948-7 thru 9249 1949-9250 to 35444 1950-35445 to 72327, 1951- 72328 to 105181, 1952- 105182 to 126981, 1953- 127007 to 131242, 1954-131243 to 160384. The WD45----1953-146607 to 160385, 1954-160386 to 190992, 1955-190993 to 217991, 1956-217992 to 230294, 1957-230295 to 236958. Also there is the engine # just under the air cleaner on the left side of the engine. The prefix of this # will either start with WD for the MODEL WD or 45 for the MODEL WD45. I hope this will help each of you to determin which model of tractor you. This iformation was takien fron The Allis Chalmers Story by C.H. Wendel
    Gary Wattier of Wylie, Tx wrote on Saturday, February 08, 2003 (PST):
  • I have noticed that alot of you out there are troubled about what model of AC you have. I hope I can shed some light on this subject. The WD tractor serial number is located on the top left differential brake housing. The year of this tractor was built from 1948 thru 1954 starting with #7 thru 160384. These numbers should start with WD then the number. The HP was about 35 The WD-45 HP was 45. The serial #'s for these tractors were from 146607 thru 236958. These #'s are located the same place as the WD's The prefix # will always start with "45" This tractor was built from 1953 thru 1957
    craig wrote on Wednesday, January 22, 2003 (PST):
  • I spent my whole childhood on the toolbox of a wd45 diesel know that I'm older I Wanted one to remember the greatest days of my life. On the 3rd of July 2002 I bought the tractor my son will learn to drive on a 1954 WD45 diesel.
    Bruce wrote on Tuesday, January 21, 2003 (PST):
  • I need a good usable Crankshaft For my WD-45 Diesel. Anyone out there have one for sale? Gleaner model A diesel combine had the same 230 cu. in. motor.
    steve zaragoza wrote on Friday, January 03, 2003 (PST):
  • I have owned a 1949 WD for 25 years, bought it for $100 from a guy who bought it new. It has never been kept in doors ,run great does not smoke, it only plows snow 1 or 2 times a year, W.Pa.
    Darcie Gayken wrote on Thursday, December 26, 2002 (PST):
  • I am the proud owner of a 1954 Allis Chalmers WD-45 tractor, with a wide front. I have fully restored it and want to take it to some AC tractor shows. Does anyone know of any in the mid west? (MN, IA, WI)
    Julian E. Jasper, Sr. wrote on Thursday, December 19, 2002 (PST):
  • I once worked for a farmer in Arkansas when i was in high school and drove a WD-45 daily. Now that i am ready to retire from a office job for the last many years i am looking to purchase one to tinker around with. I would like a wide fromt end gas burner at a reasonable price. Your assistacne will be helpful.I can be reached at 414-447-0122.
    d push wrote on Friday, November 15, 2002 (PST):
  • We have a 1955 wd-45 narrow front end. For all of you wanting to find out more information, we have found the library to be a good source. We have also purchased some books from Barnes and Noble that have been a great help in the quest to restore our tractor. Another great source is an Allis Chalmer dealer. They should be able to get you the parts catalog, service manual, and operating instructions. Anyone have any tractors or parts they want to sell? Please contact me if you do.
    Stan Dumolt wrote on Saturday, October 05, 2002 (PDT):
  • I have what I thought was a WD but I had it put in the shop for repairs and was told it was a WD45 how can I tell for sure what it is and what year it is. I really love it it's agreat tractor. So if someone could E-mail me and let know somethings about it.
    Nina / Jim huntsman wrote on Saturday, October 05, 2002 (PDT):
  • is your tractor for sale? If so what are you asking for it?
    Jack LIllar wrote on Friday, August 09, 2002 (PDT):
  • I bought what Iwas told to be a 1952 WD.The serial # in front of the gear shift,A-LE-RC 200931.The # should have been back buy the brake adjusting plate.What do I have?What are distingguishing features between WD andWD-45? Thanks much Jack in Michigan
    carl hite wrote on Tuesday, July 23, 2002 (PDT):
  • I am recently a proud owner of a 1955 WD-45 AC, but am having a hard time finding out the horse power for this particular tractor, if someone could help it would be appreciated.
    carl d. england wrote on Sunday, June 30, 2002 (PDT):
  • ac45. does it have a 2or3 disc transmisson clutch i have two manuals which show two disc. my 1953 tractor has three disc. it takes quite a bit of effort to engage and quite a loud snap when disengaged. help.
    Brad Rising wrote on Saturday, June 29, 2002 (PDT):
  • I am looking for a power steering set up for a WD 45, please contact me if you have a setup for sale, or know how to make one up, Thanks, Brad stockdragrace at
    Ross Stover wrote on Thursday, June 20, 2002 (PDT):
  • My father owned two of these (one with two narrow front wheels) in Block One north of Pasco, WA from about 1954. I drove it in the hay field in l957 and 1958 summers, to mow the alfalfa, bale it and haul it in, using a low wagon and hay hooks. I still have one tractor (retired when it got too haard to start). Anyone want to buy it?
    Bruce V. wrote on Monday, June 10, 2002 (PDT):
  • I remember as a youth spending many cold Iowa spring days plowing with my 3 brothers all on WD45's huddled down behind the heat houser in late spring snows. Dad said we got a lot more done for less money than the neighbors on their big green machines!
    Bruce Chapman wrote on Thursday, June 06, 2002 (PDT):
  • Bouight my first tractor in 1980. WD-45/ wide front. Great tractor, pulled AC-66 combine, mower, three bottom plow, New Holland -66 baler, and other implements. Ran great from 1980 until sold in 1988. Just bought 49-8N. Wish I had my WD-45. Bruce, Pleasant Shade, TN
    shane wrote on Monday, May 20, 2002 (PDT):
  • Does anyone know where I could get info on someone who could help me restore my 1954 AC WD_45?
    john alexander wrote on Wednesday, May 15, 2002 (PDT):
  • I purchased an Allis Chalmers from a man he told me it was a WD however the numbers dont make sense. The serial # at the gearshift is 208663 the # on the engine block is WD544306PA. can you help me, what model do I own?
    Jason Cybula wrote on Sunday, April 28, 2002 (PDT):
  • I recently purchased a wd-45 could someone tell me where to find the ser#, and how to determine the exact year. I would also like to know hrspr. rating, and does this tractor have a 6-volt system. This tractor has a gas engine, power steering, wide front, and a 3-point hitch.
    Dan wrote on Friday, April 19, 2002 (PDT):
  • Question I own a wd-45 allis-chalmer trator the seal for the top of trans was go and it got water in trans what oil was us in trans, and final drives. also what oil was used in hydraulics. thanks under way restoration.
    ralph shingle wrote on Thursday, April 11, 2002 (PDT):
  • have a 1941 allis chalmers wd i am thinking of selling. i still use it to bring in my hay. it just keeps on running. i am retiring from being a farmer and that is why i may sell it. any lookers? thanks ralph
    Bruce Gladiuk wrote on Friday, March 29, 2002 (PST):
  • I would like to know if anyone has a rototiller that they are selling to fit a `59 Allis Chalmers to fit a `45. Thanks.
    Bill wrote on Tuesday, March 26, 2002 (PST):
  • I have a 1955 WD45 in very good and original condition. My grandpa bought it new and put it in the shed every night.
    Lane Hetherington wrote on Wednesday, February 06, 2002 (PST):
  • My father has a WD-45,"I'am unsure of the year,"it is in great condition except that the ring gear for the PTO is broken. Any help in locating one would be appriciated
    Richard wrote on Tuesday, February 05, 2002 (PST):
  • I currently own a 1951 WD and a 1957 WD-45. The WD is in beautiful condition and the 45 is close to perfect. I let a 1956 WD-45 Diesel get away from me that I wish I had back. I grew up with the WD's. I helped my Father-In-Law farm 450 acres with a WD and a WD-45. Wonderful memories.
    James L wrote on Friday, January 18, 2002 (PST):
  • I am needing the following parts for a WD AC; gas tank support, fenders, steering rod, grille, and a radiator.
    robert wrote on Friday, October 19, 2001 (PDT):
  • I had problems with my wd45 getting stuck into gear, and was getting tired of having to pull the shifter to get it back into the proper setting. I accidently discovered a fix that will prevent it from getting stuck again. There is a slight tradeoff however which was not a problem for me. if you would like instructions e-mail me..
    DICK CHATTERTON wrote on Thursday, October 11, 2001 (PDT):
  • some restored some field ready. Also s.c. post hole digger for sale.AC 3point hitches for sale. decal sets,along with most needed parts for WD+WD 45 Tractors.
    Dave White wrote on Tuesday, September 25, 2001 (PDT):
  • I'm interested in locating some snap coupler equipment for my WD45. Is anyone aware of where any snap coupler equipment could be obtained. In particular, a springtooth, disk, or other snap coupler items.
    Charles T Reece wrote on Monday, September 24, 2001 (PDT):
  • I'm looking for parts to repair my WD45 Shift assemble Gearshift cogs are wornout yolks and sifter seem to be in ok condition. Does anyone have any parts that are available searches on the internet are comming up fruitless.
    Brad Brooks wrote on Tuesday, September 18, 2001 (PDT):
  • The easiest way to tell a WD and a WD-45 apart is to look at the side of the engine block. The WD will have a plate on the right side of the engine block. It looks like a chunk of 1/8" steel bolted to the block. If it has this plate of steel on it, it is surely a WD and not a WD-45.
    Brian lill wrote on Friday, September 14, 2001 (PDT):
  • I have a 1948 or 1949 Allis Chalmer wd for asking $850 the tin is good and runs great. It is used on the augar every fall and draging the yard and pulls a 3 buttom plow with no trouble. it is the best tractor i have ever plowed with.
    Butch Wininger wrote on Wednesday, August 29, 2001 (PDT):
  • I am in search of decals for an Allis-Chalmers WD45,I can't seem to find them if anyone can help me I would appreciate it ,thanks Butch
    scott wrote on Saturday, August 18, 2001 (PDT):
  • i have one of these in a toy but it is a tricycle
    Dan Peugh wrote on Thursday, July 19, 2001 (PDT):
  • I have a 1957 WD-45 that runs great and most everything works well. Has been changed to 12 volt. This is a gas model with the wide front end. I am asking $2000.00 for it but will consider offers.
    N.C. Bruce wrote on Monday, June 25, 2001 (PDT):
  • $$ Looking to buy a good or restored WD45 AC Tractor. Prefer Narrow front, Gas, Snap Coupler, like my Dads ole tractor, but will consider any running, no smoke, working tractor.
    John Kuebler wrote on Monday, June 25, 2001 (PDT):
  • My DAD bought a WD45 new in 1955. WE pulled a 4 bottom plow sometimes running in 3rd gear. Never has there been a tractor of this size with so much power.
    greg smith wrote on Tuesday, June 12, 2001 (PDT):
  • I have post hole digger for my WD-45 I used it this weekend building a deck on my brothers house. I really dought if there are many out there for sale. You probly will have better luck if you put a 3 point conversion on the tractor.
    David wrote on Wednesday, June 06, 2001 (PDT):
  • Have a '56 WD 45 - Does anyone know if AC built a post hole digger for their snap coupler system? My gramps farmed for years with this tractor - Always put it in the shed and took great care of it.
    Greg Smith wrote on Sunday, May 20, 2001 (PDT):
  • I converted my wd 45 diesel to gas 15 years ago. You must have the flywheel, starter,throtle assy,raditor,longer hood, and also do some modifications to the left frame rail for injection pump clearence. The rest of the tractor should be fine.
    Lyle Krautkramer wrote on Sunday, May 13, 2001 (PDT):
  • For Sale; Completely restored WD45. Excellent shape. Wide front end, snap coupler draw bar, pulley, original 6 volt system. Excellent sheet metal. Contact via e-mail Copper2602 at or by phone at 1-715-443-2067 Asking $2500
    dave wrote on Monday, April 30, 2001 (PDT):
  • i resently bought a wd 45 dieseal am trying to restore it but it is taking a lot of time and money hopefully will have it done soon
    Eric Hoagland wrote on Tuesday, April 17, 2001 (PDT):
  • I'm looking for a 1956 WD-45. Never owned one but spent many a summer day as a boy just playing on them and others at my Uncle's in middle TN., what good memories! My uncle, J.E. Clemmons had a dealership in Gladville, TN in the 50's 60's and 70's. Would like to restore one in his memory and so that I can say that the tractor is as old as I am and runs better than me. Thanks for any help.
    Max Pierce wrote on Tuesday, April 10, 2001 (PDT):
  • I'm looking for a loader for a WD. Will even concider a damaged or junk piece of equipment.
    John Panowicz wrote on Friday, March 30, 2001 (PST):
  • If the spark plugs are in at an angle it is a power crater motor that is a WD45
    John Panowicz wrote on Friday, March 30, 2001 (PST):
  • If the spark plugs are in at an angle it is a power crater motor that is a WD45
    Jim Brown wrote on Saturday, March 10, 2001 (PST):
  • I just purchased, what I believe is a 1950 WD, although the previous owner told me it was a WD45. Could anyone tell me how to tell the difference. This tractor came to me equipped with a yale loader and works hard for me plowing snow with the bucket removed and a plow blade attached. I will be using this same tractor in the spring , equipped with forks, 1st as a scidder, then to load the saw mill. The tractor runs good with a slight carb problem which we are correcting with a new carb, but the charging system doesn't work at all. I would appreciate any and all help in this area. LONG LIVE THE BIG ORANGE
    Lyle Boeckholt wrote on Sunday, November 26, 2000 (PST):
  • I have a WD45 diesel. Exceptional tractor. Have pulled in Out-of-field class tractor pulls, takes 1st in 5500# class! Great beating the Greens! Father and Grandfather had WD's, WC's, & 45's.
    PATRICK BEINE wrote on Saturday, November 25, 2000 (PST):
    Fred Frantz wrote on Monday, November 06, 2000 (PST):
  • I need help with the wiring of my WD45 anyone that can help please e-mail me i would prefer a diagram in great detail I am trying to get ready to pull thank you
    Kurt Bergman wrote on Tuesday, October 17, 2000 (PDT):
  • I have got fenders, a gas tank, 2 radiator shutters and a few other parts from a wd tractor. I do not need these parts do to the the tractor has been modified with a loader and a set of reversed gears to operate.
    Kelly Shanholtz wrote on Sunday, October 15, 2000 (PDT):
  • I am looking for fenders for my husbands 1948 WD45 in great condition, I am hoping to find some before Christmas....PLEASE HELP!!! Any information as to where I could find them would be appreciated.
    Kevin Buhmann wrote on Wednesday, October 11, 2000 (PDT):
  • I am looking for new or great conditioned used WD45 fenders
    Tom Ledford wrote on Monday, October 09, 2000 (PDT):
  • I have a 1952 WD that I use for pulling I am current setting in third place in my weight class of 4000 lbs the tractor is all stock ,but it seems to have lower gears than the other WDs in my class
    David k. Enns wrote on Sunday, September 10, 2000 (PDT):
  • As a young lad in the 50's I had the great fortune to grow up on a WD45. This was one of the fondest memories of my youth.
    jane conger-low wrote on Saturday, September 09, 2000 (PDT):
    DAVE wrote on Thursday, September 07, 2000 (PDT):
    Pekar Wood wrote on Wednesday, September 06, 2000 (PDT):
  • WD45's rule. Mine is bettar than yours.
    bill garman wrote on Sunday, September 03, 2000 (PDT):
  • i am in need of a three point hitch convertion for a wd45 allis chalmers please help me asap
    Chuck Seymour wrote on Monday, August 28, 2000 (PDT):
  • I have a WD45 with wide front, 12v, 3 pt hitch. I am in indiana and would like to know the value of this tractor. The engine runs like a top but the gear shifter is sloppy. I was told a common problem with these tractors was the shifter wearing out and causing trans to try and engage two gears at once. I also have another problem with differential. Email me if you can help with info.
    ray wrote on Friday, August 18, 2000 (PDT):
  • I have an early version of the WD 45 that used the WD engine but has the increased horse power and most of the WD 45 additions except for power steering or so the dealership told me. I have had it for about 15 years and it is getting tired and I need to get my mag rebuilt. I enjoy using this tractor but wish I had a wide front end for this tractor. I may try to change the front end if I can locate a wide front end that is inexpensive and the procedure is fairly simple, any suggestions are welcome.
    Jeremy Arnett wrote on Friday, August 11, 2000 (PDT):
  • I have a 1956 WD45 diesel that I wish to sell. It has a WF with power steering ,a New Idea bucket, AC 9' disc, AC 3 bottom plow, duals, and draw bar. All original equip. Started repairing it new starter, radiator, valve job ect. Runs but rough. 3000.00 OBO.
    Dave Shaw wrote on Wednesday, August 02, 2000 (PDT):
  • We have had a mid 50's WD45 with a farmhand loader for 2 years now, suprisingly clean, power steering, wide front, new tires front & back. Did all of the gasoline WD45's come with the "power crater" engine? We had some carb trouble about a year ago, I found that the bowl was actually cracked & the jets & other fuel passages were plugged badly. I was suprised to find that the quality of the steel in the cast iron bowl was good enough to weld, the rest was just a matter of a good cleaning & we were back in business with more power then I would have ever imagined. When I get ready to start restoring "allis" I would like some nice photo's for inspiration. If you have some good one's please send me some photo's & tell me about converting my 2 point to a 3 point. Thanks.
    Tim Pinkerton wrote on Saturday, July 22, 2000 (PDT):
  • I have a question about a wd45 that i got at a sale.I can not find out for sure if its a wd45 or just a wd. My ser# reads WD149512. well this # falls under wd or wd45. I have a curved shift lever,no plate on the side of the engine. It has a wide front on it.The front mounting plate for the wide front only has 3 bolts instead of 4.Sandy Lake implement tells me that the plate on the side of the engine means wd but lack of one does not mean 45.So do I have to check the bore and stroke to find out forsure?
    MAX E. PIERCE wrote on Friday, July 21, 2000 (PDT):
    Tyler Thompson wrote on Wednesday, July 19, 2000 (PDT):
  • My dad and i own two AllisChalmers wd45 tractors
    Cheryl Blair wrote on Tuesday, July 18, 2000 (PDT):
  • i have a WD 45, wide front end, converted to 12 volt, fair conditon, runs good, and 3 pt hitch. also have hay rake, bush hog, and plow. All for $3000.00
    Terry wrote on Tuesday, July 18, 2000 (PDT):
  • I'm looking for a wide front for a mid 50's WD45, if you have one for sale please call 515-744-2806.
    Ollie Maier wrote on Friday, July 14, 2000 (PDT):
  • Have a '52 gas WD-45 I purchased used few years back. Love it... only thing I wish it had power steering (hard to turn for old man with loader on front) and a three point hitch. Only problem now is LOOKING FOR ANOTHER CARB FOR IT. Suddenly started running very rough and then quit... would not start. Local mechanic says has good spark. Although the carb looks good, believes that must be the problem. (Compression good.) Does anyone know where I can get a good rebuilt carb or a new one (if not too much... since I only use it as a hobby tractor). Ollie in San Marcos, Tx
    Sonja Slater wrote on Tuesday, July 11, 2000 (PDT):
  • My husband owns 2 WD 45's and have almost finished restoring one of them. The other is in very good condition. Both 1956. I've just learned to drive it and enjoy it very much. Can anybody tell me where can we get the selfadhesive stickers to put on the restored one? We're from South Africa but will order from anywhere.
    Ron wrote on Wednesday, June 14, 2000 (PDT):
  • Would like to find a wide front and rear rims for a AC WD45. With in a few hundred miles of Des Moines, IA. Thanks!
    Allen Sibley wrote on Sunday, May 28, 2000 (PDT):
  • I am looking for a hydrolic pumb and cylinder for an AC b. mine has the pto but has a plate over where the pump would bolt. If anyone has one or knows where I might find one please let me know.
    Diana Williams wrote on Friday, May 26, 2000 (PDT):
  • My interest is I would like to know what a WD-45 tractor is worth at his time. The tractors is running and works great. Thank You
    Bud Sorden wrote on Wednesday, May 24, 2000 (PDT):
  • Great site Just found it Have farmed all my life with the 45s first new one in 55 and farmed over 5oo acres in row crops with two of them. Have owned three diesels and two gas but only have one of the diesels left and still use it in Iowa
    Matt Ayers wrote on Sunday, May 14, 2000 (PDT):
  • my dad has a WD on steel and was wondering how much a pare of spoke steel rimms wold sell for. if any one knows please tell me my e-mail is colesto101 at thank you
    Dean Slavick wrote on Saturday, April 08, 2000 (PDT):
  • I have a WD45LP for sale.
    Dean Kyle wrote on Wednesday, April 05, 2000 (PDT):
  • I have a wide front WD45 I recently purchased. I would like to find out what year it was made. I don't know where to look for the serial number that denotes the year. If anyone can help me, please E-Mail me at phyllisk at
    KEN NAULING wrote on Wednesday, March 29, 2000 (PST):
    Grant Mishler wrote on Sunday, March 26, 2000 (PST):
  • Austin Ferguson; Would you contact me at my e-mail address mishl001 at or phone me at (804)585-1370? I want to find out about those 2 WD-45's. My computer won't pull up your e-mail address. I am looking for a WD-45 so anyone with any info please contact me.
    mike wrote on Saturday, March 11, 2000 (PST):
  • Me and my dad have a 55 WD45 and are looking for a wide front end .
    Austin Ferguson wrote on Thursday, March 02, 2000 (PST):
  • I know where two WD45's are and they are both in great condition!!!! He only uses them about twice a year if that, to mow his lane. What would they be worth? If you would be interested in them, he would sell them for the right price.
    Matt wrote on Sunday, February 20, 2000 (PST):
  • I own a 1953 Wd wide front and am looking to buy any impliments that will fit using the snap coupler system. Please email me if you have any such items for sale. Thanks
    TOM wrote on Sunday, February 20, 2000 (PST):
    Brooks Preacher wrote on Thursday, February 10, 2000 (PST):
  • I have found an AC "WD" for sale. The owner os not sure if it is a "WD" or a "WD45". The decal is "WD". Did the "WD45" have a 45 decal? The owner said the "WD45" had a curved gear shift lever and the "WD" had a stright one. Anyone know for sure? Any other quick way to tell a "45"?
    Matt Honken-Honkens Hilltop Farm wrote on Wednesday, February 09, 2000 (PST):
  • I Grew up learning how to drive tractor on a WD narrow front, March of 99 I finally purchased my first WD. My boy is 3.5 y.O. and soon he'll learn how to drive just like his old man. I painted it and utilized fresh decals on it. Looks nice.
    Tom Mattingly wrote on Thursday, February 03, 2000 (PST):
  • Mattingly Feb 2 00 have too wds 1 wd 45 love these old tractors have a set of fenders off of wd45 about a 58 still making hay with two of them. fenders are decent shape.chain marks at bottom rear as with so many of them are.
    Ron Smith wrote on Wednesday, February 02, 2000 (PST):
  • a good friend of mine Fred Young of The Kentucky Headhunter asked me to locate used fenders for wd45, anyone help?
    eddie wrote on Wednesday, February 02, 2000 (PST):
  • need help on finding the model number and year of a tractor of my tractor it is a AC WD with a tricyle frontend with a snap couple,a pto,a top link bracket, eddie
    Gene wrote on Sunday, January 30, 2000 (PST):
  • To Jared; If you still have the WD45 with crack block would you be willing to sell the tractor? Look up Allis web pages and you can find engines and parts all over the country, I use to deal with CT in Des Moines Ia.1 888 828 3276
    Eddie wrote on Thursday, January 20, 2000 (PST):
  • I got a WD with a tricycle frontend,gear reduction on the back wheels, a snap coupler,pto,and a home made 3ph.. the decals are gone but got the numbers off the block E10 U- 3019 40 2 OR it is E1D U-3019 40 2 can anyone help me to find out the year,HP,model off this tractor THANKS to all that reply Eddie eddieh at or mrfixit_2000_7
    John A. Schaefer wrote on Thursday, January 20, 2000 (PST):
  • Hi. I'm looking for a WD 1952 to 1955 that is running. If no luck there I may settle for a WD45. Pacific N.W. only. Prefer within 300 miles of Walla Walla, Wa. Thanks.
    Jay A. Van Horn wrote on Saturday, January 01, 2000 (PST):
  • I am looking for the steering gear and worm gear for a WD Allis Chalmers tractor. Also fenders for the same tractor. It is a narrow front end.
    Jeremiah Ponder wrote on Tuesday, December 28, 1999 (PST):
  • please e-mail me if you know the correct oil weight, for the transmission rear end and hydraulic for a 1950 wd
    Jeremiah wrote on Monday, December 27, 1999 (PST):
  • My dad owns a 1950 WD. Please e-mail me if you know whare a 3-point hitch or culivators are. We are restoring it, and we would appriciate tips also
    Jim Honebrink wrote on Saturday, December 25, 1999 (PST):
  • My Grampa had a WD-45 with a wide front-end and a diesel engine in it. I'm not sure what year it was. I used to haul hay-wagons and oats and beans and unload manure with it all the time while I was growing up, man that was a fun tractor to drive. Then my Grampa had it totally redone, new paint job, decals, tires, the whole nine-yards. But instead of having the diesel engine redone, he swapped it for a gasoline engine. It never really was the same after that. Unfortunately the tractor was lost in a fire that destroyed the machine shed it was kept in.
    Gene wrote on Wednesday, December 15, 1999 (PST):
  • Wanting to know if the WD45 diesel engine will fit the WD45 gas transmission and tractor frame. What changes if any would have to be made to the tractor? Also want to convert to power steering and would like to locate the steering booster.
    Bob Swinney wrote on Tuesday, December 14, 1999 (PST):
  • I am looking for a set of 2 row cultivators for a WD-45.If anyone knows of some for sale please E-Mail me. THANKS!!!
    Mark E. Clements wrote on Wednesday, November 24, 1999 (PST):
  • my wifes grandpa had a wd with crank start. her sister and my wife ask there grandpa if the could drive the AC. he told them if they could start it they could take it to the woods. it didn't take long and off to woods they went. you see my wife is 47 years old and this happen when she was 9 or 10. here sister was 4 years older. this happen around waldo ohio 37 years ago.
    John Schweizer wrote on Sunday, November 21, 1999 (PST):
  • I grew up on 45's my family has owned 7 of them at one time or another, my brother still has 5 that are used daily for various chores around the dairy farm. Over the years they have been one of the most vesatile tractors ever produced. Just a reminder that Allis-Chalmers will be the featured marque at the 2001 I&I Farm Days in Penfield, IL.
    john flowers wrote on Saturday, November 20, 1999 (PST):
  • I am interested in finding out how i owuld check ignition timing on the motor.
    Jared wrote on Monday, November 15, 1999 (PST):
  • I bought a WD45 wiht a badly cracked block I would like to know where to get a block, complete engine, or parts tractor with a good block, preferably for cheap
    Jim Hellweg wrote on Sunday, October 31, 1999 (PST):
  • I have a gas WD45 1959 Allis Chalmer and I had to change the starter relay and I am not sure that I have it hooked up right because it will not start. Can anyone help me with some kind of verbal diagram? "HELP". Thanks, Jim Hellweg aphorse at
    tommy wrote on Friday, October 01, 1999 (PDT):
  • does anyone know what the hp is for the wd45?
    MIKE wrote on Tuesday, September 28, 1999 (PDT):
  • I recently purchased a WD45 gas. Someone before me installed an alternator and it is not charging. The guy that we bought it from figures it is hooked up the wrong way. I was wondering if anyone can help me with my problem to fix it. Thanks Mike.
    Danny wrote on Tuesday, September 28, 1999 (PDT):
  • I am looking for two rear fenders and one rim for the back wheel of a 1957 WD45, If you know where these items are available to me please e-mail me. Thanks!
    John Chrzan wrote on Friday, September 17, 1999 (PDT):
  • How can you find the value of a WD45? We recently acquired one. Physical condition is good but I am afraid mechanical condition is not. It came with 3bottom plow and sickle mower. Thanks for the help.
    J.D. wrote on Monday, September 13, 1999 (PDT):
  • Great tractor except for the absence of 5th gear, independent P.T.O. , and a true 3-point hitch. The power is exceptional for size of the tractor.
    Randy wrote on Monday, September 13, 1999 (PDT):
  • I have a fare amount of knowladge on WD'S and parts
    Phillip Shapton wrote on Monday, August 23, 1999 (PDT):
  • I am the owner of a 1957 AC WD-45 wide end.We have hade it for 20 years and last year we hade it restored.It's the most wonderful tractor Allis chalmers made.
    Kerry Don Wood wrote on Friday, August 13, 1999 (PDT):
  • My Grandpa gave me I think its a 1949 model WD gasoline. I would like to now the cheapest and easiest way to restore to its original state.
    Eric Gage wrote on Saturday, August 07, 1999 (PDT):
  • Just bought a WD-45. Two minor mishaps so far, but it is so easy to work on. I'm pulling a JD#5 sickle mower (7') with a two-point hitch. I had to fit an adapter to the AC drawbar. Any way to tell the age of the sickle? It works great.
    erik wrote on Saturday, July 17, 1999 (PDT):
  • My grandpa has one of these, but the crankshaft broke about 20 years ago. If it had not happened, the WD I have would have cost more to restore becaue I exchanged many parts from it.
    Jerry Bjorn wrote on Thursday, July 15, 1999 (PDT):
  • I'm thinking about buying a WD45 and wonder if parts are available, such as carborator kit, distributor, water pump, engine gaskets, etc.
    michael pasqualone wrote on Thursday, July 15, 1999 (PDT):
    Tom Schulte wrote on Friday, June 18, 1999 (PDT):
  • Looking for information on an available WD 45 Diesel - preferably tricycle front.
    Peter Augenblick wrote on Monday, June 14, 1999 (PDT):
  • I think I have one of these. It is 4cy gas w snap coupler. Any idea how I could tell what year it is for sure?
    Billy S. Smith Jr. wrote on Sunday, June 06, 1999 (PDT):
  • I am the original owner of a 1957 WD45 AC, wide front end with power steering. This tractor has been in my family since day one. PERFECT CONDITION

    Use This Form to Add Your Own Comments or Questions


    [Return to the Shed]

    Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F).  Expedited shipping available, just call!  Most prices for parts and manuals are below our competitors.  Compare our super low shipping rates!  We've kept the same low rate for six years.  We are a Company you can trust and have generous return policies!   Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

    Home | Forums

    Copyright © 1997-2023 Yesterday's Tractor Co.

    All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.

    TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within these website pages are the property of their respective trademark holders. None of these trademark holders are affiliated with, our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.