|
Antique Oliver Tractor: Oliver OC-6
[Return to the Shed]
|
This picture shows a 1947 version. If you have information on this tractor, please submit it via e-mail to tshed@tractorshed.com |
|
Do you have any comments or questions about this tractor? Ever use one?
Know anyone who owned one? If so, please join in on the discussion below.
Use the form for entering your comments.
Comments on this Tractor
plschaffer wrote on Wednesday, June 26, 2013 (PDT):Oliver OC6 for sale... email me
randy williams wrote on Thursday, February 02, 2012 (PST):this note is for anyone looking for oliver oc clet trac parts try zimmerman clet trac. I found they have any thing I need for my oc4. cranks books you name it they got it, hope I was of some help.
randy williams wrote on Thursday, February 02, 2012 (PST):this note is for anyone looking for oliver oc clet trac parts try zimmerman clet trac. I found they have any thing I need for my oc4. cranks books you name it they got it, hope I was of some help.
kelly fancher wrote on Tuesday, June 21, 2011 (PDT):My question is could you tell me how much an OC3 4cyl,gas, ROPS crawler/loader weighs. Thank you for your help.
Kevin Mullany wrote on Friday, May 27, 2011 (PDT):Hello, Would it be possible to explain to me a problem with our Oliver oc3 Crawler, I have just started to restore it, so it turns over well, i only have a cranck start, so we have no spark on turning it over, would this be timing issue or distributor/magneto problem. Really appreciated if you could help. Regards Kevin
anthony neal wrote on Monday, May 02, 2011 (PDT):Identify Year - FCUB - SN# 16124J, Eng #251341R6 what year is this thanks
tania burnss wrote on Sunday, May 01, 2011 (PDT):oliver super 88
Albert Schut wrote on Tuesday, April 26, 2011 (PDT):I grew up on a muck farm, my dad and grandfather had an OC6 that they bolted 24 oak 2x4s to the tracks. In the spring when we couldn t get on the field with anything else, that old Oliver would almost walk on water. We still have an OC3 from those days.
Oliver wrote on Friday, November 26, 2010 (PST):I just got my hands dirty on a oliver fleetlined oc4-3G-68 cant wait to get it done from what i have seen it might be rare but not sure. can anyone tell me more info on years where to get parts and if it is rare or not thank you
Larry Morris wrote on Tuesday, July 06, 2010 (PDT):I am wanting a OC3 oliver crawler running or not, located in midwest. I am in Ks.
Tim Anderson wrote on Tuesday, June 29, 2010 (PDT):I owen an Oliver oc-46-3g that starts but only run s for a few seconds.I have cleaned carb set points and have135 lbs of compression in all three cylinders.Does anyone know about this problem
wilson braña c. wrote on Thursday, November 19, 2009 (PST):tengo un tractor oliver modelo IXB-3 PARTE CON BENCINA Y TRABAJA CON PARAFINA ,PERO ME FALTA EL SISTEMA ELECTRICO PARA HACERLO FUNCIONAR, SI ALGUIEN DE BUENA VOLUNTAD LO SABE SERIA DE MUCHA UTILIDAD PARA MI DESDE YA MUY AGRADECIDO WILSON
Kenneth Tillman wrote on Thursday, May 07, 2009 (PDT):I have a celtrac crawler was my wifes dads,looking to find out the where the year and model, is a gas 4 cly.I plan on restore it.any info i would appreciate.Thanks KT
Mark wrote on Sunday, March 22, 2009 (PDT):I just got an Oliver Crawler OC3-42 - Serial#9WH828. I think it is a 1951 or 1952 Tractor and has a loader on the front. I am looking for any details I can find on this tractor. It has a 4 cylinder gas engine with a bad crank. I can t find any pictures on the internet that look like my Oliver Tractor - Crawler. I would be glad to email anyone pictures if you can give me any information at all. Thanks in advance, Mark
roy w sauder wrote on Wednesday, December 31, 2008 (PST):if any of you have a 0c6 oliver crawler with 68 inch track width or know of one i would realy like to hear from you as i am enterested in restoreing one. Roy
dennis johnson wrote on Wednesday, May 14, 2008 (PDT):I know of a hercules engine that is sitting in my fathers yard could be used for parts. I have just gotten my oc3 running it has a ware loader and a cycle mower
dennis hight wrote on Tuesday, May 13, 2008 (PDT):i just bought a oc6-68-G I need to find what it weighs it is bare no blade or implments.ineed to tow it home. any info will help thanks Dennis Hight
raymond huntone wrote on Thursday, March 13, 2008 (PDT):I own an Oliver 0-6hi-trac. Am intrested in parts or entire tractor . A regular OC-6 parts would be the same. My phone is #585-704-2317
Jeff Hurley wrote on Wednesday, March 05, 2008 (PST):I have a cletrac oc6 and my throttle handle assembly is stuck. I have let it sit in diesel fuel for sometime and still won t budge. If anyone has any info please e-mail me back. Thanks Jeff Hurley
southern british columbia canada. wrote on Tuesday, October 30, 2007 (PST):OC-3 crawlers-have two with parts, also Cletrac HG with Ware brand loader. Looking to see anybodies info on wether or not a restoe is affordable. Can t find generator parts.
Rich St.Petery wrote on Tuesday, September 04, 2007 (PDT):Does anyone have an engine for a 60/62-3 OC46 Gass 3 cyl. herculese Where how much
Tom Hogue wrote on Tuesday, June 26, 2007 (PDT): I need a rear sprocket for a 1958 oc 4-3d
richard cochrane wrote on Saturday, May 19, 2007 (PDT):I HAVE A 1949 OC3 OLIVER TRACTOR CRAWLER WITH A ONE YARD BUCKET IT WILL LIFT ITS OWN WEIGHT THE POOR LITTLE GUYI had to add more counter weight to make it more secure to move allso a V shaped snow blade its for sale squamish bc canada
Eathan wrote on Monday, October 09, 2006 (PDT):Wanted on West Coast (OR, WA or N. CA) - Oliver Dozer in fixable to working condition - email with info, pics if you got 'em, asking price and location. Thanks!
Woody wrote on Sunday, June 25, 2006 (PDT):I have a OC6? the tag says oo6-42-g the serial # is 3502842. What I don,t understand is it is a 6 cyl diesel. The Crawler is painted yellow and has a dozer blade , no PTO , the hydraulic has a 2 valve control but only one is being used for the blade . Ifanyone has info or is interested in buying it my phone # is (209)545-1417 Thanks Woody
FL Vinetardman wrote on Monday, January 30, 2006 (PST):Wrong model number..... OC3-42 Thanks guys
FL Vineyards wrote on Monday, January 30, 2006 (PST):I have come across an OC-42. It appears to be in good shape and restoreable. Where can I get info on this model?I do not see it mentioned in many sites. Any inofrmatin is appreciated
dave glenn wrote on Sunday, July 17, 2005 (PDT):I have a1947 olivia ddozer that starts fine but wont move does anyone have a picture? or how to replace cluth someone please help thank you
RICHARD wrote on Friday, May 27, 2005 (PDT):I PURCHASED 1959 OC-46-3G TRACK LOADER LAST FALL IT STARTS AND RUNS GREAT USED IT LAST WINTER TO PUSH SNOW,GREAT COLD START. PREVIOUS OWNER INSTALL ELECTRIC FUEL PUMP,WIRED DIRECT,I INSTALL AN INLINE SWITCH PREVENT FLOODING AND DRAINING BATTERY, UNDERCARRIAGE IS LITTLE ROUGH,SOME REAR OIL LEAKS. WOULD LIKE TO RESTORE OC-46 LOOKING FOR NEW DISTRIBUTOR CAP, FUEL PUMP OR REBULD KIT,CARB KIT,LEFT DRIVE HUB,STUDS,REAR SEALS,AND GASKETS. PREVIOUS OWNER HAD ORIGINAL SHOP MANUEL ANYONE WITH LEAD ON PARTS WOULD BE APPRECIATED THANKS.
JOHN wrote on Wednesday, May 18, 2005 (PDT):WANTED SMALL DOZER WITH A BLADE IN VERY GOOD WORKING ORDER,IN THE MIDWEST
JOHN wrote on Wednesday, May 18, 2005 (PDT):WANTED SMALL DOZER WITH A BLADE IN VERY GOOD WORKING ORDER
John wrote on Sunday, April 10, 2005 (PDT):Hi,Just got what I think may be a OC-4 in a trade, never owned a Ollie before but think i'm gonna keep this 1 to restore, neat lookin Lil Tractor, how does 1 tell the diff, between a OC-3 and a OC-4 ? also in need of a starter motor for it, any info would gladly be appreciated, Thank's, John
Rob wrote on Saturday, March 12, 2005 (PST):I love old tractors! Does any one know the value of an OC4?
Fuck wrote on Tuesday, February 22, 2005 (PST):Fuck tractors!
boby wrote on Monday, October 18, 2004 (PDT):you got a crawler
boby wrote on Monday, October 18, 2004 (PDT):you got a crawler
Dave Glenn wrote on Tuesday, July 27, 2004 (PDT):I have a 1947 oliver oc6 that runs but wont move. It is a track machine can anyone advise
Bryan LaVergne wrote on Sunday, July 25, 2004 (PDT):wanted small dozer oliver oc3 or of similar size Washington St.
Marty wrote on Saturday, April 03, 2004 (PST):I own a OC-3 Oliver and I am looking for a Hercules motor or any electronic parts for distrubtor. Any comments would be helpful.
Joe wolfort wrote on Thursday, March 11, 2004 (PST):I'm looking to purchase an OliverOC3/4,0r a Cletrac HG 42 Dozer,or,Loader.If you have one for sale E-mail me at; jgwolfort at netzero.com or.call 305 745 9821.Thanks,Joe.
cody gibbs wrote on Wednesday, October 15, 2003 (PDT):i have a old pennslyvania panzer and i was wondering if u would know how much it would be worth if it was restored or if it was worth restoring it. im guessing it is around a 40-50 model. i would sure appriciate it if u could find that out for me. thanks cody.
Ron Freeman wrote on Tuesday, October 14, 2003 (PDT):I have a 1948 Oliver Cletrac HG 60". It is 99% restored. It has bin converted from mag to coil. The only new parts were u-joints, gas cap & radiator cap. I bought the tractor for $50.00. The only motor work required was a valve job.
ziggy grzybowski wrote on Sunday, September 21, 2003 (PDT):hello I need A couple headgaskets for A oliver OC46 3cyl.gas crawler about A 1960 or 62
scott wrote on Monday, March 03, 2003 (PST):I have a oc6 if any one needs one to restore or parts let me know 360 366 0354
Duff Matson wrote on Wednesday, February 26, 2003 (PST):I have an unrestored HG68 Oliver Cletrac "high track".No mag,carb,govenor.manifold has a hole,engine may be frozen.Transmission case cracked,maybe beyond welding.One front arm or axle is broken where it touches wheels.Is this worth restoring?
jason marks of hereford pa wrote on Friday, August 09, 2002 (PDT):my father own about 11 oliver tractors and i own 3. a few years ago my brother talked me into buying a john deere 440 trackloader, something i didn't want. what i would really like to have is an oliver oc-6 gas or desiel, because of the model 77 engine used and the fact that it has both live pto and hydraulics. but i will take any oliver or cletrac crawler i can get, plus i'll even give the john deere 440 as trade. if anyone is has one for me let me know.
bob wrote on Friday, July 19, 2002 (PDT):Oliver bought Cletrac in 1945. Anyone with an interest in these tractors should belong to the HART-PARR/OLIVER COLLECTORS Assn. Bi monthly mag full of stories and tech info as well as ads for parts and services. contact hpocacc at fiai.net. The best scource for cletrac parts and advice is Zimmerman Oliver-cletrac, Ephrata Pa, 717-738-2573,mon-fri 7-5 EST.
daryl king williamtown ny wrote on Tuesday, March 05, 2002 (PST):I HAVE TWO OC-3 ONE RUN GREAT AND ONE A PARTS TRACKDER.I HAVE A BUCKET AND A BLADE.BUT I NEED A RADIATOR
Leo Dahlberg wrote on Tuesday, January 22, 2002 (PST):I'm rebuilding a model AG 6 Celtrac 1946 I believe. I'm confused as how the Oliver and the Celtrac are related.any knows let me know.Also I need a set of lovered panels,if any one knows of set let me know.Thanks.
Mike wrote on Saturday, January 19, 2002 (PST):I'm trying to determine the value of an OC3 and an OC4 with a loader. They both run and are located in the northeast.I'm looking for anyone who may be interested in purchasing them or helping me source a new home for them. I'm on the west coast and don't think it's feasible transporting them across the country.
tsoukjr wrote on Friday, January 18, 2002 (PST):We have one on our farm and we use it alot for pulling tractors out of the mud and pulling logs for firewood in the winter
Ron wrote on Wednesday, November 14, 2001 (PST):have an oc3 and am looking for parts. any suggestions would be greatly appreciated. throttle parts and magneto. i believe it's a 1950
Dwight Miller wrote on Friday, July 27, 2001 (PDT):Re;Larae Whitfield steering clutches. I owne a 1960 oc4,and that model dont use clutches to steer,it has 2 brake bands,one for left and one for right,they can be relined
larae whitfield wrote on Monday, June 04, 2001 (PDT):we have an oc4 crawler and need steering clutches for it does anyone know where can find some or have any for sale.
Guy Heberling wrote on Tuesday, April 24, 2001 (PDT):We just purchased an Oliver crawler tractor OC-3 four cyl/gas engine 1948 and need help getting it going. I think it's the magneto, because it will turn over, but can't get any spark. Any help you can give will be greatly appreciated.
Scot Olson wrote on Sunday, April 22, 2001 (PDT):I just got an oliver oc46 can anybody get me a book on this thanks scot
Russ Pribble wrote on Tuesday, April 17, 2001 (PDT):I have a 0c-6 im fixing looking for parts if anyone has one there parting out.
Roger T. wrote on Sunday, November 19, 2000 (PST):Looking ffor a rebuild kit for oc-3 crawler w/3 cylended motor. Help Please
Pat C wrote on Saturday, July 08, 2000 (PDT):I'm looking for a Oliver OC-3 crawler to restore or in good shape.
Dick Hoffman wrote on Sunday, June 25, 2000 (PDT): I have an OC3 Dozer with a cage over it. I use it a lot around home. It is in nise shape and I have a lot of spare parts. A complete undercarrige, frame and transmission. I installed an alternator and 12 volt battery, lights and gauges. I saved all the old parts for anyone to go back to orig. I am moving soon and have no need for it anymore so I will be selling it. Anyone looking for a great little machine with all the spares send me an E-Mail. I am in Cle Elum Wa.
Leon Dupont wrote on Thursday, January 27, 2000 (PST):I have long been an owner of the Oliver OC-3 and 4 series Have several of each torn down for parts. Would be glad to give any info i have.
Roy JAMES wrote on Friday, January 21, 2000 (PST):I also inherited an oc 3 oliver crawler from an uncle in Alberta It had been left out in the elements for a number of years . I manged to find another scrapped out unit with a good undercarrige so have since replaced tracks , rollers side frames , and front idlers , am now replacing the magneto with one i have built out of spare parts and then replace the ex valve and in take valve on # 4 cyl. This is a 4 cyl hercules gas engine with the oliver intake and exhaust manifold . have no manuals so am learning as i go . It is a 1942 model with a ware front loader attachment , If I can help with any questions please let me know . I reside in southern BRITISH COLUMBIA [ CRESTON ] .
Gene Webber wrote on Sunday, January 09, 2000 (PST):I have an OC3 with Oliver loader and am working on restoration. The engine has been rebuilt and now the govenor is not working right. I would like comments from any one with info. or parts for this machine, or one to look at any where near N.H.
Ron J. wrote on Friday, December 24, 1999 (PST):Have OC-6 Oliver.Engine SN/1024311. I'm trying to find tractor SN as SN tag is missing. Hoping someone could back track from engine number to find SN number. Also need sheetmetal,rollers,trackpins and bushings. Think this machine is between 1950-54 possibly a little older. I'm enjoying this project and any help would be greatly appreciated!
LYLE JORGENSEN wrote on Saturday, December 11, 1999 (PST):I INHERITED MY OLIVER OC-6 DIESEL WITH OLIVER BUCKET LOADER IN 1989. ENGINE HAD NO POWER OR DIESEL RATTLE AT IDLE. TIMING OUT OF WACK SO I REBUILT INJECTOR PUMP/REPLACED BROKEN PARTS. RUNS VERY GOOD WITH DIESEL RATTLE AT IDLE AND PLENTY OF POWER BUT LOW OIL PRESSURE AT IDLE. THIS BLOCK IS USED FOR GAS APPLICATIONS SO HAS 4 SMALL MAIN BEARINGS.I WILL PULL PAN AND CHECK BEARINGS AND OIL PUMP. ALREADY TIGHTENED UP OIL PRESSURE REGULATOR TO MAX.TRACKS ARE GOOD BUT NEED ROLLERS AND PINS.DRIVE SPROCKETS WORN AND NEED WORK.MUST FIX HYDRAULIC PUMP. SEALS GONE. HYDRAULIC CYLINDERS GOOD.NO PTO OR REAR IMPLEMENTS. NEED ENGINE SIDE COVERS AND AIR CLEANER DUST COLLECTOR. NEAT TRACTOR.
H. Burnett Clasic Repair wrote on Sunday, December 05, 1999 (PST):I have an oc-3 Part restored . No sheet metal . Runs all new track Rollers with new pins. trans rebuilt. new bands. Dont know if its feasavle to finish or not or just junk it out.
Rick wrote on Friday, December 03, 1999 (PST):I've got an OC-3 that runs quite well and has good tracks. It needs bushings in the idlers and first and reverse make some noise. The noise from those gears may be natural but in 2 & 3 the trans is very quiet. Anybody know about the noise and the bushings?
CH wrote on Thursday, November 25, 1999 (PST):I own an OC 3, Oliver. Will soon begin restoration. Parts? Info? CH
[Return to the Shed]
|
| Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We've kept the same low rate for six years. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ] |
Home
| Forums
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within these website pages are the property of their respective trademark holders. None of these trademark holders are affiliated with TractorShed.com, our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. |
|
