PartsASAP LogoCompany Logo Tractor Shed Logo Parts for Old Tractors
Click Here or call 800-853-2651
TRACTOR  PARTS TRACTOR  MANUALS

Antique Case Tractor: Case VC

[Case VC Parts]     [Return to the Shed]

This tractor is the row-crop version of the Case V series. It came standard with a power takeoff and was available with adjustable front and rear axles. The tractor was produced from 1940 to 1942, a total of 12462 made - more than any other models within the series.

Case VC Tractor


Do you have any comments or questions about this tractor? Ever use one? Know anyone who owned one? If so, please join in on the discussion below. Use the form for entering your comments.

Comments on this Tractor

jeff lenarz wrote on Wednesday, November 29, 2023 (PST):
  • What plugs are used on a 1941 vc Case with continential engine. AC75 is no long availabe. it has D16 Champion plugs in it but that seems hot
    jimmy wrote on Tuesday, February 18, 2014 (PST):
  • I just picked up what I believe is a 1948 case vac tractor. That s what I was told....doesn t run the starter gear was stripped out and I was told it needs a clutch. It has good paint new plugs wires coil and ok rubber. Ive called a few local parts places for parts they said just scrap it. Any information about this tractor would be appreciated. Thanks
    Brownie wrote on Sunday, February 02, 2014 (PST):
  • I need the implement arms and centre adjusting arm for VA Case Eagle 3 point
    Jeff may wrote on Tuesday, October 15, 2013 (PDT):
  • I am looking for the sheet metal that covers gas tank on case vc tractor
    Ray Matthews wrote on Sunday, September 08, 2013 (PDT):
  • I need a gas tank for a 1957 model 300 Case Roundnose. My phone #5406617372. This model had two options for a fuel tank. On the bottom of the tank I need has 1/2 raised. Some have 1/4 raised and this would not work on my tractor.
    Jim Bueter wrote on Monday, September 02, 2013 (PDT):
  • I have just purchased a Case Vc tractor for restoration and am in need of lots of various parts. Please contact me if you have either parts or a complete non running parts tractor that you would sell. Thanks, Jim
    Jim Bugg wrote on Friday, July 26, 2013 (PDT):
  • I have a Case VC that I am restoring that I need clips for a Auto-Lite distributor cap. If anyone has any or knows where I can get them please let me know. Thanks!
    Mark wrote on Tuesday, May 14, 2013 (PDT):
  • I have a 1940 case tractor for sale, Not running but body is in nice shape
    charles kyle wrote on Saturday, March 09, 2013 (PST):
  • I have 1952 case that run great,then one day seemed to vaper lock,cant get it started back.tired of messing with it ,would be ideal for restoration..if interested call 502-827-1727 will sell cheap!!!
    francis crowley wrote on Sunday, September 09, 2012 (PDT):
  • Just wondering if a case va clutch will fit vc or spec of a vc clutch thank you Fran
    jon gederos wrote on Saturday, December 18, 2010 (PST):
  • I have a vc case 1940=42 in very good shape i live in south dakota it has been in barn for 25 year anybody looking for one it s for sale
    Roger Berner wrote on Friday, August 27, 2010 (PDT):
  • Just a little note. I have a 1940 case vc I just bought this year. It is in pretty good shape except for the paint. I noticed in the discription of the vc series it stated they come standard with the pto. Mine does not have the pto. It is capped off as is the belt pully. I read somewhere else that both of those along with elect. start and lights were all optional.
    Edie Keppy wrote on Tuesday, August 17, 2010 (PDT):
  • I have a vc Case tractor made 40 to 42 for sale. How would I find out the value of this tractor I am settling an estate and have many antiques.
    sean crowley wrote on Thursday, July 15, 2010 (PDT):
  • any one know were to get tins for a 1940 case vc
    RALPH KOTRBA wrote on Thursday, April 01, 2010 (PDT):
  • I AM HOPING TO FIND SOME BODY THAT HAS A GOVENOR FOR A 1941 VC CASE IT HAS A CNTI ENGINE FLAT HEAD 4 ALSO IF ANY BODY KNOWS OF A USED ENGINE FOR THE VC CASE
    Bob Abbott Wis. wrote on Wednesday, March 10, 2010 (PST):
  • We have a VAC Case that was purchased new back in the 40 s. Still runs, wanting to get it restored and painted. Has a loadrer attached to it.
    Jim Sereyka wrote on Sunday, October 04, 2009 (PDT):
  • I have a Case that has an ID tag on the panel facing the tractor operater, it reads VC4518865. The starter is missing and so is my memory of why. My wife tells me it did have an old Ford starter in it. The pitch or distance as measured from the top of one gear to another on the fly-wheel or driven gear measures about 3/8 of an inch. Please help me identify and locate a new or used starter. Thank you very much for your help. Jim
    Don Piper wrote on Friday, October 02, 2009 (PDT):
  • 14,016 dc 1955 dc 4 were made
    Dan Majerus wrote on Tuesday, September 01, 2009 (PDT):
  • Help, I have a 51 vac case need parts for single disk break system call 406-837-1101
    Mark Treece wrote on Sunday, July 26, 2009 (PDT):
  • I just bought a 1948 case tractor for 500 that was sold as is not running w/ front bucket, and if he can find the back blade will give that too me too. I took it home and fired it up and with a little work have most of it working. I need to know what type of oil to put in the gear box and rear end. Thank you
    Paul Rodman wrote on Friday, June 12, 2009 (PDT):
  • I ve acquired a 1940 VC case tractor. I need a right rear wheel...klnow w here AI can get one
    Barbara E. Clement wrote on Tuesday, March 31, 2009 (PDT):
  • I am doing research to find the current value for a 1936 Case Tractor, Model RC. This Tractor was in working condition, and used everyday on a Family Farm, here in Massachusetts. Can anyone provide me with either the Value of this Antique or a Website, where I can expand my research to Thank You very much.
    harley campbell wrote on Wednesday, April 16, 2008 (PDT):
  • I have a 1948 case VAC-what a work horse-runs great, allways starts.I have 40 acres that was overgrown with 8 ft. tall brush and trees,have a 4ft.bushhog mower and this old tractor ate it up like a hay field.All fields now look like well a hay field--keep oil clean,radiator full,and get ready for a long days work-tractor was bought in Milan tenn.and never spent a day in barn till i got it.
    Ralph wrote on Saturday, February 09, 2008 (PST):
  • I have a 1952 VAC model for sale. It has a 1 year old Brush hog and blade. I am asking 2200. Runs great, just drove it this morning. Does anyone know a good place to list it for sale 614.271.6524 I can send pictures if you send email to DrRalphy at AOL dott com.
    Mark wrote on Saturday, January 26, 2008 (PST):
  • I have a rare 1942 Case V for sale.It s in very good condition; no rust or dents in metal. Was shown at the Museum of Appalachia Fall Homecoming Show. Need more info Call me 423 784-1899. I can email pictures.
    Dave Potratz wrote on Thursday, January 10, 2008 (PST):
  • I have a very rare 1936 Case RC for sale. It has been restored and has new rubber. This tractor has the straight on steering wheel, unlike the chicken roost later models. I can also be reached at 712-240-7203.
    Charlie Moffitt wrote on Wednesday, September 12, 2007 (PDT):
  • I have a fully restored 1951 Case VAC. I am not very knowledge on tractors. I acquired this through my fathers friend that was have huge financial issues. I am looking to find out the value of the tractor and also sell the tractor. Any advice is welcome.
    bill Hale wrote on Monday, August 20, 2007 (PDT):
  • Where is this tractor located Please advise me. Thanks
    alex joshu wrote on Monday, July 23, 2007 (PDT):
  • hi iam 16 and just got a 1952 vac case and i am really big in to tractor pulling and i was wondering if there any other kind of case engine that will bolt up to it so i could get more cubic inches if u no any kind plz email me at joshfam5 at htc.net thanks
    vpaecge wrote on Friday, July 13, 2007 (PDT):
  • Good work!
    rbzccyw wrote on Thursday, July 05, 2007 (PDT):
  • Good work!
    andrew navis wrote on Monday, October 02, 2006 (PDT):
  • I just bought a 1941 case VC wide front end I'm trying to find trans parts like a clutch and breaks thank's Andrew Navis
    tim wrote on Sunday, August 13, 2006 (PDT):
  • Looking for total vehicle weight of a 48 case vac tractor w/ trike front end
    John wrote on Friday, July 28, 2006 (PDT):
  • Just bought a 41 case dc 4 eagle, can anyone tell me if this is a negative or positive ground. Thank you in advance
    Wayne wrote on Thursday, June 08, 2006 (PDT):
  • I have two case VAC. Got both for free and ond dose not have serial tag but think it is the same year as my 46. I am looking for some odds and ins.
    tracy sr wrote on Wednesday, May 10, 2006 (PDT):
  • I'm in the process of restoring my 1940 vc case,it's just like the one in the photo. above, looks and runs great,but the rims on the rear need replaced 9x32.I would appreciate any info. on where to find rims thanks. montana
    S.R.Green wrote on Wednesday, May 03, 2006 (PDT):
  • I have a 1948 case tractor with no ser. or model number. On all the parts on the tractor is VT then a number. Does anyone know what model it is. I'm also trying to find manuals on this tractor also. Can anyone help me, please
    Jack Wilton wrote on Friday, April 14, 2006 (PDT):
  • Where can I find a louver for an Allis Chalmers radiator louver? I have an Allis Chalmers B.
    J. L. F. wrote on Sunday, March 26, 2006 (PST):
  • Need to know if you can tell the year model of my inherited VAC by the serial number? Any help out there?
    Rick T wrote on Saturday, January 14, 2006 (PST):
  • I have a 1949 case vac tractor. I purchased it about 2 years ago. It has a tan hood and side shields and the rest of the tractor is a yellowish color. did they ever make one this color.
    BRIAN wrote on Tuesday, December 13, 2005 (PST):
  • I NEED CLUTCH PLATE FOR MY VC TRACTOR PLEASE HELP IN ANY WAY
    BRIAN ROCH wrote on Tuesday, December 13, 2005 (PST):
  • I NEED CLUTH PLATE FOR MY VC TRACTOR PLEASE HELP
    Ronald McCormick wrote on Wednesday, November 09, 2005 (PST):
  • I have a DC Case tractor with the serial#8029395 narrow front end. can anyone help me find more info on this tractor.The tractor still runs and looks great.Just can't find any info. on it.Maybe I'm not looking at the right numbers but our local Case dealer says I am. HELP!!!!
    Bob wrote on Monday, November 07, 2005 (PST):
  • My brother in law has a 41 case vc, he has restored it back to new but needs the right lights that mount on the fenders. Anyone have or know where to get these? Also there is a spring loaded valve on the pto case, anyone know what this is for? Thanks.
    Ron Moore wrote on Saturday, August 27, 2005 (PDT):
  • I recently repurchased my 1956 VAC-14 (for twice what its worth) for my grandson. the front wheels/tires are 6;00/16. Therefor the front sets high I believe they should be 15" is this correct? serial number is 6038897 where does it fit in the production cycle? the tractor was yellow when i purchased it originally in 1975, which i think is incorrect. may have been used by state highway dept. any othe info will be appreciated
    Gary Hann wrote on Monday, August 01, 2005 (PDT):
  • Have 1953 VAC 14 Need some parts to restore.
    Brian Underwood wrote on Monday, June 20, 2005 (PDT):
  • I have just purchased a '42 Case VAC tractor that runs well. I'm looking for help on 3 point hitch conversions and locations of accessories (e.g., belly mower) I can buy. Thanks.
    BRIAN wrote on Saturday, May 07, 2005 (PDT):
  • I HAVE A 1941 VC FOR POSSIBLE SALE AND IT RUNS I BOUGHT WHEEL WIEGHTS AND FENDERS FOR IT AT AN AUCTION
    Leo wrote on Friday, January 28, 2005 (PST):
  • Yes a friend had a V A C Case. he called it a "V"ery "A"ggravateing "C"ase
    larry veno wrote on Monday, January 03, 2005 (PST):
  • have 1949vac case looking for bush hog,sickle bar mower and cultivators camp hill pa.
    squeaker wrote on Thursday, December 16, 2004 (PST):
  • Have case 2 bottem plow on steel. Does this have any value. It is missing one colter, other wise, good old plow.
    Jerry L. Robbins wrote on Sunday, November 21, 2004 (PST):
  • I found a VA Case tractor for sale it is not running with two rear flats but the tractor is compleat can anybody give me a ballpark figure. Thanks
    Keith wrote on Sunday, November 21, 2004 (PST):
  • Have just purchased a 1953 Case VA, with band brakes (in WA State). One brake (right side) was totally frozen and I need parts. I have to replace the oil seals both sides. It may have to do with someone putting AUTOMATIC TRANSMISSION FLUID!?!?!?!? into the final drive. It was mixed around 75/25, but made the 90 weight red. I mostly need the internal parts, but before I have them removed, the brake housing may get damaged as well. I have been working at removing the rusted Brake Drum Nut (2" dia.) for the last week. Any ideas?? THANKS
    Jason Morse wrote on Saturday, November 06, 2004 (PST):
  • I have a 46' VAC #5050159 We bought at a local auction october of 2003. When I got her home she was put right to work hauling logs. I was impressed with the power enough so that a full resto was in order for the winter. Come spring when we rolled her out of the shop it was off to the pulls. with the tractor weighing in at 2,650# we loaded her for 3,000# class. After spinning out with too much power we went to 3,500 4,500 and then 5,500 when she was really starting to hook up great but I ran out of places to hang weight. I have to say that after all these years being a green blooded 2 cyl fan I think there might just be some flambeu red seaping in. Hey if anyone knows how I can find out more about my case where it was made, sold, and whom was her 1st owner. and any site pertaining to the VA series I would greatly appriciate it. remember too that old tractors can be a great family hobbie. Thanx
    Phillip Lux wrote on Friday, October 08, 2004 (PDT):
  • I just purchased a 1941 VC Case in sad shape. Everything is free but stiff. It is not running yet. It will be a fun project. My problem is color scheme. My dad's VC case was all yellow. As the picture was taken in about 1954 I do not think the tractor had been repainted. The tractor I have seems to have red frame but yellow sheetmetal and fenders. John P Martine; If you still check this forum I have a picture of Dad's old case with oil filter on the side just above the pulley.
    pat moran wrote on Wednesday, October 06, 2004 (PDT):
  • I have a complete restored VC that I will be selling in the spring. I also have a VC motor, narrow front end, torque-tube and differential for sale. I also have a VAC-14 with a loader and a stuck motor for sale now.
    Jimmy Fann wrote on Saturday, September 11, 2004 (PDT):
  • I have 3 VAC'S, one running and two for parts, i bought a DC and just completly lost interest. I have lots of extra parts and a wide front end. Could easily have three running tractors. If interested call me at 865-982-6812 8-5 est, or 865-982-3991 6-10;00 est. thanks jimmy
    Timothy Jones wrote on Saturday, August 07, 2004 (PDT):
  • Hi.I have a VAC 470117 about 1943. it came to New Zealand on all steal wheels because rubber tyres where unavailable during the war. A fourth gear was added when rubber tyres where available. its resting in the shed ready to restore! have a full set of mid mounted cultivators and part of one furrow plough. The other case i have is a VA 5359364. Cheers Tim
    bill mcenery wrote on Tuesday, July 06, 2004 (PDT):
  • need brake parts for vac-14 can any one out there help?
    Rich wrote on Friday, June 25, 2004 (PDT):
  • Hello, I think I have a Case VC tractor, but I am not sure as the serial number plate is missing. Any tell-tale attributes that you know of to uniquely identify it as a VC? Also, this tractor has what a appears to be a hydraulic lift on the rear end by the PTO shaft. I have replaced the transmission gear lube, but there is yet another resevoir associated with this lift. Any idea what type of fluid should be installed? What came out of this resevoir looked like heavy gear lube, but I think it probably should have hydraulic fluid installed. I welcome any advice. Rich
    douglas derrick wrote on Monday, June 21, 2004 (PDT):
  • i have a restored vac i use every week to pull my 5ft brush hog does a great job am looking to sell
    matt pohlman wrote on Sunday, May 09, 2004 (PDT):
  • I need a complete front end for a vc any help. e-mail matt.
    Jerry Wieland wrote on Thursday, April 15, 2004 (PDT):
  • I am looking to purchase a VA series Case tractor. It need not run or be pretty but should be complete. Midwest location.
    Sam Kremer wrote on Saturday, January 10, 2004 (PST):
  • I have a VAC Case that needs a new engine. Where can I find one?
    Robert Fitch wrote on Saturday, January 03, 2004 (PST):
  • I have a CASE VAC (1946?) that is in good shape but not running and I would like to get it in working order. I would greatly appreciate the opportunity to speak with some one who has knowledge of these old tractors. thanks in advance for any help that you might be able to provide.
    Ken wrote on Saturday, November 22, 2003 (PST):
  • My Neibour and I just pulled a 1941 VC out of the dirt from behind the barn on his old farm. It has been sitting there a long time. 20 years or more. We were wondering how much it was worth and if it would be worth trying to get it running. It looks like most of the parts are there. The pulley on the side is missing. The back wheels don't turn, other wise it's not in bad condition, for the condition its in.
    marion arneson wrote on Thursday, November 13, 2003 (PST):
  • I grew up with Case tractors. L, SC, DC, VAC, 400, etc. My father started farming in the 30's with tractors as his father quit using horses. I We farmed along the Republican River near Inavale, NE. My memories of the VAC was that it beat you to death and we started it with a hand crank. 2 row machinery and long days.
    M. Mask wrote on Saturday, September 27, 2003 (PDT):
  • I have a 1953 VAC and am interested in restoration. What do I do first, Just want to get it in usuable shape not show room condition. Would trade for good small antique running tractor.
    scott wrote on Wednesday, September 24, 2003 (PDT):
  • 1947 case vao, very good cond. Runs perfect, good rubber.800.00 so calif
    John P. Martine wrote on Friday, September 19, 2003 (PDT):
  • I need to speak with or e.mail someone that owns a Case VC. I have a VC that I bought from a gentleman in far north MN. I'm in the Houston area. I have a hole in the left side of the engine block that might be a drain hole for the block. Maybe, just maybe there was suppose to be a drain valve there. Also, I CAN NOT find where it ever had a oil filtering system. I have a book on the Continental engine. Pictures in that book indicate the filtration system was on the left side, just forward the starter inside a cylinder that had tubing running off of it. Do any of you have any manuals or can you take digital pictures of your VC to aid me in my restoration project? Any assistance would be GREATLY appreciated. --John P. Martine
    Mike Lambert wrote on Saturday, August 23, 2003 (PDT):
  • I have just traded for a 1951 VAC it has been completly rebuilt, new paint ,new tires.It runs as good as new. I would like to find where I can get decals for it,and also want to know what it is worth. GMLambert at comcast.net
    Reed Gardner wrote on Sunday, July 06, 2003 (PDT):
  • Wanted Case V series (rowCrop) in eastern Iowa area. Thanks
    Virgil j. Reinig wrote on Monday, April 28, 2003 (PDT):
  • i have a vac-14 1953 that i have completly redone ,i put 13-6-28 rear tires on it and it handles them well since i am going to use it for show and parades or pull a float. i sent to case co. and got the line sheet and equip. sheet plus when it was built and the dealers name in Pirestone in. where it was delevered when it was new . i needed a new steering wheel and could not find one at a good price so i bought a truck steering wheel cover and it looks great . i also found a new pully for it , it has a tube type wide front axel that is adj.i would not sell for 5500. as my sons want it so i will keep it. if you need parts or a contact at the plant you can call me at 260-627-2491 leo in. this is more fun than dancing haa!
    Virgil j. Reinig wrote on Monday, April 28, 2003 (PDT):
  • i have a vac-14 1953 that i have completly redone ,i put 13-6-28 rear tires on it and it handles them well since i am going to use it for show and parades or pull a float. i sent to case co. and got the line sheet and equip. sheet plus when it was built and the dealers name in Pirestone in. where it was delevered when it was new . i needed a new steering wheel and could not find one at a good price so i bought a truck steering wheel cover and it looks great . i also found a new pully for it , it has a tube type wide front axel that is adj.i would not sell for 5500. as my sons want so i will keep it. if you need parts or a contact at the plant you can call me at 260-627-2491 leo in. this is more fun than dancig haa!
    moe wrote on Saturday, March 08, 2003 (PST):
  • HELP THIS IS ALL THE INFO I HAVE ON THIS TRACTOR CASE VAC4828376 NEED TO KNOW MORE ABOUT THIS TRACTOR BECAUSE I DON'T HAVE A MANUAL AND I'M TRYING TO REPLACE A PISTON ARM AND NEED TO KNOW SPEC'S AND WHERE TO FIND PART'S (PETROLIA ONTARIO)
    BJ Call wrote on Sunday, February 09, 2003 (PST):
  • I am currently buying a VC model, I already have a VA model that is a real basket"case". Many parts are missing on the VA. However the VC seems to be pretty much complete, less a right rear tire & rim. It has a 4 cyl. flathead that appears to be a contintal Red seal? It has a distributor or ignition out of the head, that it is wired for. It also has a magnito that is not hooked up. The tractor has been ssitting a long time and needs a lot of TLC. Any correct history or input would be greatly appreciated on both of these tractors. Thanks BJ at calljonesclan at cs.com
    Brad wrote on Monday, December 30, 2002 (PST):
  • I have a 1952 vac I am in need of alot of parts it is in rough shape. Does anyone know of another tractor I can buy for parts? I live in utah.
    Todd Vice wrote on Wednesday, December 18, 2002 (PST):
  • I have a 1947 vac that I restored to mint condion in 1999. This has been a very good tractor for me as a daily user. These small but efficient tractos are comfortable and afordable, and simple to repair. I would recomend this model for anyone seeking a easy, yet valuable on the farm tractor.
    Richard Krusewski wrote on Wednesday, October 16, 2002 (PDT):
  • I have a 1941 Case V C. Can anyone help me and tell me where I can get parts, and informatoion. Anything will be helpful.
    Rodney wrote on Monday, October 07, 2002 (PDT):
  • I have four vac tractors and one parts tractor. I was not a case lover until my first one was given to me. After using that tractor I got over my redpower addiction and it is case all the way. I must confess that I do still have my F-12 and a F-20 as well, but they are just play toys! I use the vac to bush hog, belly mower to cut grass, tiller for garden, and a baler and rake, cultivator, but I need a sickle mower.
    V. J. REINIG wrote on Saturday, September 21, 2002 (PDT):
  • i found a good vac-14 with h d wide front adj.,need a pully and good steering wheel this 14 has an offset steering colume. can also call me at 260-627-2491collect thanks.
    G LETTICH wrote on Monday, August 19, 2002 (PDT):
  • AWHILE BACK I SEANT AMESSAGE TO FIND PARTS FOR MY VAC CASE ITS A1951 BUT FORGOT TO GIVE MY E MAIL ADDRESS,NOW LOOKING FOR A CHARGING/LITE SWITCH FOR MINE IS SHOT,SEEMS HART TO FIND,ANY KIND OF HELP IS A BIG THANK YA
    virgil reinig wrote on Monday, August 12, 2002 (PDT):
  • my dad had a vc in indiana on the farm during ww2 used it for everything they were super for there horse power . i would like to find a vac with wide front andeagle hitch in good condition with history if possible, would take narrow front would like it to be the last year they were built , i think that was 1955 to 1957 take serial # and subtract 4 from first 2 #s and that will be date built tel. # 260-627-2491 thanks
    Stan Olson wrote on Tuesday, July 30, 2002 (PDT):
  • looking for headlights for a Case VC, I understand they mounted on the fender and were rectangular? Thank you
    Stan Olson wrote on Tuesday, July 30, 2002 (PDT):
  • looking for headlights for a Case VC, I understand they mounted on the fender and were rectangular? Thank you
    Danny wrote on Sunday, July 21, 2002 (PDT):
  • We just bought a case vac for my father we are looking for a grill for it if anyone know's where we could find one please e-mail me thanks.
    CLINT wrote on Wednesday, July 17, 2002 (PDT):
  • SEVEN DAYS AFTER SEPT. 11TH, I BOUGHT A 1948 CASE VAC FROM A NIEGHBOR AND PLAN TO PULL IT THIS YEAR A THE COUNTY FAIR. I PAID $1000.00 FOR THE TRACTOR AND I LOVE IT.
    Henry Milks, Jr. wrote on Friday, May 24, 2002 (PDT):
  • My dad had a Case VC tractor. he bought it new in 1941 at Kayes Moter Sales in Portville, New York. Dad died in 1998 and shortly after he died I was contacted by a young man who found out we had an old Case Tractor and wanted to buy it. We told him that if he tore down the old building the tractor was in and cleaned it all up, he could have the tractor for free. Needless to say he jumped right on that deal. The tractor was in sad shape. The engine was froze up and the hood and other sheet metal were rusted badly. The young guy took the tractor home on a trailer and went right to work on it. He had to get a new engine, and believe it or not found a brand new one still in the crate!!! It cost him a small fortune for it but he had to have it, because the original one was beyond repair. He also found all new sheet metal for it!! We still had all the original manuals that came with it, for tractor, plows, and Mowing Machine, and we gave all those to him also. I've seen and driven tractor since he got it all restored and it's real sharp. Hope you enjoy reading this. I'll include my home address in case you care to contact me. Henry Milks, Jr. 36 Cross Drive Bradford, Pa. 16701
    Andrew Tipaldos wrote on Wednesday, March 13, 2002 (PST):
  • I have a 1941 case it runs great no problems it has a front end loader on it and a eagle three point hitch.
    David T. Scritchfield wrote on Tuesday, March 12, 2002 (PST):
  • I have a 1941 Case V or a VC iam not sure but i am having no luck finding any one who has parts. I need help.
    David T. Scritchfield wrote on Tuesday, March 12, 2002 (PST):
  • I have a 1941 Case V or a VC iam not sure but i
    David T. Scritchfield wrote on Tuesday, March 12, 2002 (PST):
  • I have a 1941 Case V or a VC iam not sure but i
    R.Lipps wrote on Tuesday, February 19, 2002 (PST):
  • I just bought a vac-14 , power lift bleeds off how I fix this problem
    D Anderson wrote on Sunday, February 17, 2002 (PST):
  • I just bought an older Case tractor that looks somthing like the one in the picture, mine only has one front tire. Could someone help me find out what year and model it is. Thanks
    Don Eccles wrote on Sunday, January 20, 2002 (PST):
  • My E-mail address is; ddej2 at magma.ca
    Don Eccles wrote on Sunday, January 20, 2002 (PST):
  • How do you tell what year your Antique Case Tractor is? I heard it was in the serial number.
    John Greeley wrote on Sunday, January 20, 2002 (PST):
  • My "e" mail is ;johngreeley at hotmail.com
    John Greeley wrote on Sunday, January 20, 2002 (PST):
  • I recently restored a 1948 "vac" from top to bottom. Can anyone give me info on how to wire the head lites and tail lites? ( positive ground ) Thankyou ;)
    Jeff Kephart wrote on Monday, September 03, 2001 (PDT):
  • I recently bought a Case VC just like the picture. I would like to find a manual or something to help me restore it.Currently registers a negative charge while running would like to know more. If anyone has any information please let me know. Thanks
    Ken Morton wrote on Saturday, September 01, 2001 (PDT):
  • Recently inherited a tractor that belonged to my Dad. He always said it was a Case VAC. It has no serial # name plate. It has a wide front end. Four cylinder overhead valve engine. Hydraulic three point hitch. Any help on year and complete model #. I would like to restore this tractor, but need help identifying.
    Steven Holt wrote on Thursday, August 30, 2001 (PDT):
  • I have a 1940 case vc tractors. i am seeking catalogsor other useful information.new to old tractors
    Jim Burbridge wrote on Thursday, August 16, 2001 (PDT):
  • I have a Case vc just like the picture above. serial # is 52#####vc. I am assuming this tractor is 1948, but per the note beside the picture above, the VC was only made from 1940-42. Do the VAC's not show "VAC" on the tag? does anyone know how much this tractor weighs?
    MIKE KOSELKE wrote on Thursday, June 21, 2001 (PDT):
  • just bought a vc, year unknown[no plate]this tractor complete i think.im new to the case breed can anyone help with a parts book?even a copy would be fine.Also internet sites would help.I also need tin that goes over battery box. Love this site. Thanks
    Roy Cooper wrote on Saturday, June 09, 2001 (PDT):
  • I have access to a Case Model VAC 14 Serial # 6011915, anbody interested in restoring please contact me . Also I have access to other Case old farm equipment. Good site..... Thanks
    bobby hunt wrote on Sunday, May 27, 2001 (PDT):
  • the case tractor pictured at the beginning of this artical is like the one that my son and i had just got it running good when i bidn't check the antifreez and it froze and pushed the freeze plugs out now i have to replace them before we try to get it running again.we also have a 1947 and a 1962 that we are tring to get running
    floyd wrote on Wednesday, May 23, 2001 (PDT):
  • might be getting 47 vac that was owned by my grandfather need to know if parts are readily avail.the tractor was purchased new in lanesville in at the case dealership.
    gene letttich wrote on Sunday, April 29, 2001 (PDT):
  • wandering if anyone could help me,got a50;s model vac case needs some parts to get her up and moveing again she runs but poor power,thanks from sacramento,pa
    Dave Barker wrote on Tuesday, December 05, 2000 (PST):
  • I live in British Columbia Canada. I just purchased a 1941 VC Case. I need a cam shaft or a whole motor. I also need 9x32 and 10x26 tires that just hold air. Thanks if you can help. Email or phone 250-499-2095
    Don Pechan wrote on Sunday, November 26, 2000 (PST):
  • I own a Case "VC", "VA", and several others-one of the easiest ways to tell them apart is that the"VC" engine is a flathead, and the "VA" is overhead valve, but there are many other differences. The only parts that are interchangeable between the two, that I know of, are the rear wheels. The guy who wrote that a "VAC14" is an industrial version is in error-the industrial "VA" series tractor is a "VAI". A "VAC14" is Cases attempt at making a low slung tractor to directly compete with the Ford "8N'. Case built the "V" series in 1940 and 1941 only-the "VA" series was built from 1942 until 1955. The "V" series also had vendor built trans. and rearend gears, built by Clark Co. in Michigan. Parts are not easy to find for the "V" series, although they are not so tough for the "VA" series, as they made so many more of them, try a tractor junkyard.
    joe maurath wrote on Saturday, November 11, 2000 (PST):
  • recently purchased a 1952 case vac 12, narrow front.I am looking to restore this tractor but new to the game. Were can parts be purchased? currently need steering gears. do they still manufacture these parts or have stock remaining? St. louis, missouri area
    John Chovanes wrote on Wednesday, October 11, 2000 (PDT):
  • Gary Buhr ------ The difference between your VAC & The VAC 14 is that the 14 is an industrial version.
    Larry Lauckner wrote on Thursday, September 28, 2000 (PDT):
  • My dad bought a new VC case in 1941 and that old tractor ran well into the eighties . It was over hauled many times. I spent many hours on that ole tractor.
    rick wrote on Saturday, August 12, 2000 (PDT):
  • I have a VC tractor that I purchased a couple of years ago. It looks like the picture that is attached to this website, and I am interested in selling it. The engine is strong,(it smokes), but everything else works fairly good.
    ed donald wrote on Wednesday, August 02, 2000 (PDT):
  • did case make a 1952 or 1955 DC 4
    Gary Buhr wrote on Friday, July 28, 2000 (PDT):
  • My brother and I are restoring an old Case that we inherited from our father. We believe it is a Case VAC14, 1947 or 1948. It is two tone colored, off yellow and orange. What were the original color(s) of this tractor? Also, could anyone tell me what the difference is between the VAC and VAC14 models?
    Aaron C. Tank wrote on Monday, July 03, 2000 (PDT):
  • Hello, This question is for a DC tractor rather than a VC tractor (sorry...) I am planning to purchase an early 1950's Case DC tractor (possibly a DC3?) and would like to adapt it so it can use some of our 3-point implements. However, it does not have an eagle hitch... Does anyone have any suggestions as to how I could adapt this Case DC so it could use smaller 3-point implements? Thank you. Sincerely, Aaron C. Tank
    John Houser wrote on Wednesday, June 28, 2000 (PDT):
  • When I was a kid, back in the 1950's, I worked with my dad's VC Case. It had a "bolt-on" sickle-bar mower and I cut hay and straw with it. We also used it to pull hay wagons. It was a good size for that type of work. Dad also had an SC, a DC, and a 500 Diesel. He liked Case tractors.
    Wayne Pridham wrote on Sunday, June 25, 2000 (PDT):
  • I have aquired a 1941 model"v"Case.It runs good,and has a continental engine.This tractor is a cranker with magneto. Hope to restore it.Needs an exhaust manifold,and a heat gauge.Case history book shows rims were black.Anyone who has seen one, please let me know at wspridham at golden.net Wayne Pridham Ontario,Canada
    LITTLE JIM wrote on Wednesday, June 21, 2000 (PDT):
  • I just got a 50 vac Case, and I would like to convert it to a 12 volt system. I'm new to this,I need help.Thanks for any help. Right now it is 6 volt positive ground.
    Robert Worthy wrote on Thursday, May 11, 2000 (PDT):
  • I have a 1949 or 50 model 300 CASE tractor, I haven't been able to find much info on. Does anyone know of this tractor.
    Thomas gerlich wrote on Tuesday, May 09, 2000 (PDT):
  • I am thinking about purchasing a vac case. How much hourse power do these have? Do thay have live hydrolics? What do thay have over a farmmal H that I presently own?
    Don Stoltenberg wrote on Sunday, March 26, 2000 (PST):
  • Just purchaced a 1946 Case VAC. Runs well, Needs a new or rebuilt carburator. Looking for info on 3-point hitch.
    john martinez wrote on Sunday, March 05, 2000 (PST):
  • would like to know more about 1948 case tractors just bought one
    WAYNE FOUST wrote on Monday, February 28, 2000 (PST):
  • e-mail address jlwest at mcn.net
    WAYNE FOUST wrote on Sunday, February 27, 2000 (PST):
  • I AM LOOKING FOR A HOOD LATCH FOR A CASE VAC. PLEASE RESPOND TO E-MAIL ADDRESS. THANK YOU.
    Travis English wrote on Sunday, February 20, 2000 (PST):
  • dose anyone have info on a 1947case tractor.
    David Packer wrote on Sunday, February 13, 2000 (PST):
  • I have a vc case that my grandfather bought new. I currently use it to pull my kids around on intertubes or in and old rowboat. I need parts. Where do I start looking for VC parts. I think mine is a 1942. My serial number is vc4415817. Engine parts are easy to get through jeep part supply houses but I need an exhaust manifold and a steering colum. I have hit nothing but dead ends in the parts department.
    Dave Barker wrote on Sunday, January 30, 2000 (PST):
  • I am looking for fender parts for a 1947 VAO Case. If you have any info please email or phone 250-499-2095. Thanks Dave Barker
    steven unterborn wrote on Sunday, January 23, 2000 (PST):
  • i have a 1948 case vac and i am restoring it and was wondering if the tractor was all orange or were the fenders and other parts the cream color? also i was wondering if there was a place that i could get decals for this tractor?
    Steve Nurmela wrote on Saturday, January 22, 2000 (PST):
  • I resently picked up a vc, the engine has one cracked sleeve.I'm not sure if it is a continental engine or not. How do I tell?
    Dan Conine wrote on Monday, January 10, 2000 (PST):
  • I recently purchased a 1942 VC model. I need to find a water pump, but otherwise it is ready to work. I also have a 1952 model VAC. The VAC runs well, and works hard. I would like to find an eagle hitch for it, though. Any help would be appreciated. (Midwest states, please.)
    mad wrote on Friday, December 31, 1999 (PST):
  • i have a 1948 vac case purchased from the original owner. this tractor came with original front and rear cultivators. the original owner bragged that the tractor had only been rained on once while it was hooked to a stationary peanut picker!!
    JON EMMICK wrote on Friday, December 24, 1999 (PST):
  • I have recently aquired a 48 case vac . I am new to the tractor field and would like restoration info and implement information .the tractor came with a cable/hydraulic operated plow but i need info on what type of mower or field mower i could use with this setup.
    TERRY wrote on Monday, November 08, 1999 (PST):
  • WHAT WAS THE TRUE COLOR OF THE 1950'S CASE TRACTORS? EARLY MOD. LOOKED ORANGE BUT TODAY CASE INTERNATIONAL ALL IS RED. MY COUSIN IS RESTORING A 1951 CASE AND WANTS TO PAINT IT THE RIGHT COLOR BUT MOST INTERNAIONAL PAINTS ARE DEEP RED. THANK IN ADVANCE.
    Jim Grissom wrote on Friday, October 15, 1999 (PDT):
  • I just bought a 1941 VC Case tractor. Where do I begin to start to restore this tractor? Where can I get parts? I live in southern California and live in the rural town of Acton. The tractor runs well, but the starter currently does not work. I'm new to owning tractors, so i would appreciate all the help anyone has to offer.
    LITTLE DON wrote on Saturday, September 25, 1999 (PDT):
  • HERE'S A VAC CASE FOR YOU THE ONLY REASON I SENT YOU THIS IS BECAUSE YOU HAVE ONE SEE YOU AT THE SHOW
    Steve Conreaux wrote on Saturday, September 18, 1999 (PDT):
  • I bought my VAC off it's original owner 3 years ago to mow 12 acres of grass. I had a good laugh when looking through the owners manual, finding the original "Customer's Machinery and Implement Order" form only to find out that I purchased it for $300 more than it sold for new! It's been a great runner and will pull a 7 1/2' finish mower. I am currently gathering the parts to convert it over to a 12 volt system.
    Lowell Alward wrote on Saturday, September 18, 1999 (PDT):
  • I have restored a 1941 vc case.I thought they were produced in 1940 to 1941 with the va series starting in 1942.
    Stephen Boutillette wrote on Thursday, August 05, 1999 (PDT):
  • the VA series debuted after the war....the V series was produce with a Cont. F-124 engine the VA had a Case with similar displacement. the VA series also had many "conviences" such as electric start as a standard feature although it was popluar on the V.... The VA series was produced starting c 1946-7 (if memory serves) and went on for some years...FYI only two Case series up til the '50's were produced with other than Case engines V and the R's I believe.
    Ken P. wrote on Friday, July 02, 1999 (PDT):
  • I have a 1948 Vac. It has a 5 foot WOODS brand belly mower on it. I use it to mow our very large yard. I own a small sawmill and I also use the tractor for moving around lumberwagons. My next project is to rebuild an old lumber edger and power it with the Case. I use to own a mid sixties Cub LoBoy, also with a five foot deck, {International deck.} I used it for four years, but I was always throwing money at it. The Case is ten times the tractor, I love using it, hope to have it for a long time.
    Ron Davids wrote on Friday, June 18, 1999 (PDT):
  • I own a restored 1948 Case VAC (restored by my father about 8 years ago). I see no reference to the VAC. It looks very similar to the VC Model, so I assume it is a later version of the row-crop VC model. If you would like a picture, I would be glad to E-Mail one to you.I also have the original "Owners Manual" and "parts manual" along with the "Hydraulic Manual"-I imagine these are worth hanging on to - based on prices for Manuals. My Grandfather was the first Case dealer in Montana-back in the 1930's. You have a great web site-keep up the good work. Ron Davids Hoodsport,Wa. ofs at hctc.com


    Use This Form to Add Your Own Comments or Questions

    :
    :

    [Return to the Shed]



  • SHOP  FOR  PARTS SHOP  FOR  MANUALS
    Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F).  Expedited shipping available, just call!  Most prices for parts and manuals are below our competitors.  Compare our super low shipping rates!  We've kept the same low rate for six years.  We are a Company you can trust and have generous return policies!   Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

    Home | Forums


    Copyright © 1997-2024 Yesterday's Tractor Co.

    All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.

    TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within these website pages are the property of their respective trademark holders. None of these trademark holders are affiliated with TractorShed.com, our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.