PartsASAP LogoCompany Logo Tractor Shed Logo Parts for Old Tractors
Click Here or call 800-853-2651

Antique International / Farmall Tractor: International 300 Utility

[Return to the Shed]

This was International Harvester's first utility-type tractor. It is basically the same as the Farmall 300, but with a higher RPM rated engine. It was low to the ground and easy to maneuver.

International 300 Utility Tractor

Do you have any comments or questions about this tractor? Ever use one? Know anyone who owned one? If so, please join in on the discussion below. Use the form for entering your comments.

Comments on this Tractor

JESUS DELGADO wrote on Thursday, October 10, 2013 (PDT):
    totfix wrote on Monday, June 24, 2013 (PDT):
  • IH 2276 .engine;BD144A frontloader;40-1.backhoe;wain roy B1 i need seal/gasket for the backhoe questions;what is the difrens beetwin IH2275 and IH2276 who have spare parts in this wold. to the tractor have a nice day.
    john cross wrote on Thursday, June 20, 2013 (PDT):
  • I am looking at a 300 utility. Any thing special I need to check.
    Ken wrote on Thursday, June 20, 2013 (PDT):
  • I bought an old 1956 IH McCormick 300 Torque Amplifier and I need to know what fluid I should put in the Hydrolic unit for the Bucket and Where it add it. Thanks
    Neil Adams wrote on Monday, June 17, 2013 (PDT):
  • Dear Bill Gaul; The 300 U had two manual steering boxes that were standard on that tractor. mine was broke when I bought it and I had to replace it. The one earlier model had a bad steering box and International replaced it with a better one. They are hard to find but you might try the tractor grave yards on line. One I would suggest is McFaddens in Sharon Springs, N.Y.
    Marilyn Anderson wrote on Monday, June 03, 2013 (PDT):
  • I have a replica of a childs 3+ years old 8-16 International kerosene tractor. Scale model by Quality metal toymakers. is this worth anything Original bar code and label is 27.99. Model 1-16 made of die-cast zinc and represents the International 8-16 IC Kerosene Tractor. Still in original box.
    carolyn wrote on Saturday, June 01, 2013 (PDT):
  • 1956 utility 300.power steering box was put on it but there is no priority valve to hook to,can anyone help,or is there a retrofit that someone has done.
    Bill Gaul wrote on Wednesday, May 22, 2013 (PDT):
  • My International 300 utility with manual steering broke two teeth off the right side gear that is in the steering box. Any idea where to get one or other steering parts Thanks Please email me. william.j.gaul at
    S. Schwartz wrote on Tuesday, May 14, 2013 (PDT):
  • Bought some property and found an old International 300 Utility tractor sitting among the bushes. It has a bucket attachment in front and what looks like a box of weights in back. It makes for a unique lawn ornament. I have a photo but can t find a place to post.
    Neil Boriskey wrote on Monday, January 23, 2012 (PST):
  • I have a 300 utility orchard style tailpipe comming out left rear Have a loader on it and I lost hydraulic pressure to raise and tilt the loader, steering pump whines really bad when i tried to turn, thinking I need to rebuild the hydraulic pump on the tractor. is there a rebulid kit for these or just buy a new pump Anybody have any other suggestions.
    Brad Lewis wrote on Monday, December 05, 2011 (PST):
  • I have a 300 utility that is pooring out oil while its running. Coming out under tractor in front of transmission, I believe its 80 90 weight oil. What could cause that How could I get hands on directions on how to split tractor and any tips on the best way to do that
    RJ Rezner wrote on Saturday, December 03, 2011 (PST):
  • I have a 300, and I need to know what and where can I find what I need to convert it to 12Volts, and a gas down carb.
    RJ Rezner wrote on Saturday, December 03, 2011 (PST):
  • I have a 300, and I need to know what and where can I find what I need to convert it to 12Volts, and a gas down carb.
    john b wrote on Monday, November 28, 2011 (PST):
  • ihave an international tractor my brotherinlaw left me when he past. needs steering box worm gear and bearings i dont know what year it is only number on plate on side of motor is 3668-jw can anyone lead me in the right direction to get parts and manual. i have steering box apart but i cant get the worm gear out. thanks in advance if you can help
    James marbury wrote on Sunday, November 06, 2011 (PST):
  • I have a International utilty 240 would someone tell me what year the hp this tractor should have are how I can find out it will be very appreciated,
    James marbury wrote on Sunday, November 06, 2011 (PST):
  • I have a International utilty 240 would someone tell me what year the hp this tractor should have are how I can find out it will be very appreciate.
    Lee Pittman wrote on Tuesday, August 23, 2011 (PDT):
  • I just recently bought a 1955 International Utilty 300 its been setting in a shed for the past 10 to 15 years i had it running in less than 3 hours. I would like to know what weight of engine oil to run in it and where to check the rearend fluids. Any and all help would be appreciated
    James Hardy wrote on Wednesday, June 22, 2011 (PDT):
  • We are looking to purchase a 1957 International 350 Utility. In checking it out we have found that when the PTO is disengaged it whines. Does this mean there is something wrong w/ the PTO We re buying it to primarily bush hog w/ it.
    tim d wrote on Tuesday, April 26, 2011 (PDT):
  • am looking for a lubrication chart for an International 300 Utility. See quite a few grease fittings, but don t want to miss any. Any and all help would be appreciated
    Ray Groom wrote on Thursday, January 13, 2011 (PST):
  • I bought a 460 international utility industrial tractor backhoe a couple years ago for 2300.00 at auction and i took it to job site it had no balls wouldn t dig I put a new pump into it still no balls checked the compression all were low so took the engine out took it to henry mootz by portage paid to have it completely rebuilt, I got 2 new rear axle hubs now the only thing i have left to do is to replace the rear main axle seals and behind the throwout bearing theres a seal in there under the shifter that was leaking. does any one know how to replace the rear axle seals and how to get apart the area behind the throwout bearing, I down loaded onto craigslist my machine for sale for 4,000.00 but i have 8500 invested so if I could get it all back together i could probably get more money back on it and not take such a loss. So if could give me the info would be much appreciated.
    t.fraim wrote on Sunday, January 02, 2011 (PST):
  • international 300 utility transmission fluid what kind
    henry wrote on Saturday, November 20, 2010 (PST):
  • I have a 1958 international tractor, the power steering worked when bought but started leaking when the front tire went sideways in a hole and now dosen t work does anyone know how to fix!
    cullen wrote on Friday, November 12, 2010 (PST):
  • I have a 300 that is leaking hydraulic fluid in to the oil pan. I need to know how to remove the distributor and pump. All hints and help are appreciated. thanks
    john d wrote on Friday, October 01, 2010 (PDT):
  • The 300 utility that I have wiil not lift, these are things I have checked Pump, filter, safety valve, regular vave, replace the lift cylinder. I have flow to the cylinder but no pressure. Can any one help this tractor has been down for a while. I need it to prepair the garden for next year.
    johjn donnell wrote on Friday, October 01, 2010 (PDT):
  • The 300 utility that I have wiil not lift, these are things I have checked Pump, filter, safety valve, regular vave, replace the lift cylinder. I have flow to the cylinder but no pressure. Can any one help this tractor has been down for a while. I need it to prepair the garden for next year.
    john d wrote on Monday, September 13, 2010 (PDT):
  • My tractor has stop lifting. I have narrowed it down to the pump and filter. Whta I need is step by step instruction how to install a another pump.
    terrie medlin wrote on Sunday, August 22, 2010 (PDT):
  • my daughter in law has a 1953 international 54 harvester f a model and we want to know what is the value ,it runs but has rust
    dick h. wrote on Saturday, June 19, 2010 (PDT):
  • i have a 300 utility, how do i adjust brakes could use some advice thanks.
    Stan Byard wrote on Tuesday, May 11, 2010 (PDT):
  • I have a 460 IH Utility with a 200 IH loader ,tow bar, fork for bucket,hay fork, side and rear remotes with a shuttle trans. 281-879-6511
    Robert Phelps wrote on Tuesday, May 04, 2010 (PDT):
  • For Sale 300 IH Utility, TA,Clutch,Power Steering,PTO,Hydr loader work. Tac 1221 Hr, Serial#16793, Eng C-169 excelent condition.Mower,blade available 80 miles from Chicago IL call 815-882-2467
    Virginia Hiemstra wrote on Monday, April 26, 2010 (PDT):
  • Have a 1958 Allis chalmers-CA with double plow/snow plow and bucket in good working condition- need to find a selling price- IF any one can help -please send e-mail thanks
    Elroy Fisher wrote on Friday, April 09, 2010 (PDT):
  • Can anyone tell me where to get rear tires for my 300 international tractor. They say 13.6-12x28 on them. I live in Manitoba, Canada.
    Harold Beyer wrote on Thursday, March 11, 2010 (PST):
  • have a 300 IH looking for used Hydraulic pump tractor runs great had it for years--May sell if decent offer.Located in WI
    Brent Thurman wrote on Tuesday, February 02, 2010 (PST):
  • INTERNATIONAL 300 FOR SALE. I have an International 300 tractor in good working order for sale. Located in Whitewood SD. #605-376-1765
    jeff miller wrote on Sunday, January 24, 2010 (PST):
  • My dad just bought a 1956 300 utility with loader and rear blade.any Ideas on where I can get a rear rim for it
    Lyle Renfrow wrote on Wednesday, January 20, 2010 (PST):
  • I am looking for a injector pump hub for a 340 International utility diesel any info or suggestions would be greatly appreciated.
    Gary Decker wrote on Saturday, December 26, 2009 (PST):
  • will a farmall 300 radiator fit in my 300 utility
    Jack wrote on Saturday, November 21, 2009 (PST):
  • Hi, I am buying a IH 350 Utility gas engine. I d like to know more about this tractor. Can someone give me links for repair and rebuild and any information about the tractor itself. Thanks!
    Brian Henecker wrote on Saturday, September 19, 2009 (PDT):
  • Hello have a vintage1950s international utility300,gas engine 4cyl,torque amplifier model. looking how to find serial number since plat worn, foundfollowing numbers14557SJ on what was left on plate. engine hasG169 9 30 A. ONhood penciled on are 30164107and40337485looking for a carb and gasket set for engine since leaking oilhave shop manualIH10 but looking for a more specific manual for300utility
    Robert Hoag wrote on Wednesday, September 09, 2009 (PDT):
  • My tractor is a 1955 international 300 utility. I am looking for the Torque Amplifier emblems. There are two one for each side. Please let me know if you know where I can purchase for under 20 each. Thanks
    Johnny Kidwell wrote on Saturday, August 29, 2009 (PDT):
  • I have found a IH 300 utility tractor with gasoline engine PTO has on and off switch 2 or 3 point hitch torque Amplifier. has not been restored I am new at this and would like to know what it is worth if the engine is not stuck or if the engine is stuck thanks johnny
    Steven Main wrote on Monday, August 10, 2009 (PDT):
  • Im looking for a hood and side covers for a IH 354 1975 any help would be appreciated.
    IdeHo Joe wrote on Thursday, July 23, 2009 (PDT):
  • I am searching for the steering gear box for a Int. 300U. Or need a rebuild kit for the gear box. Any help would be appreciated. Thanks, IdeHo Joe
    D Burleson wrote on Sunday, July 05, 2009 (PDT):
  • I have an International 340 Utility that I am restoring and need a wiring diagram.
    Bill Wheeler wrote on Tuesday, June 23, 2009 (PDT):
  • Have IH 240, what years were they built Where is the drain for the hydraulics for front attachements/blade etc. Hydralic valve filter access
    Nick Ardoin wrote on Sunday, May 31, 2009 (PDT):
  • i have a 240 international and i have some qestions for yall. what year was the tractor made how strong is the engine what is the little grey knob on the right side of the drivers cab for, a front loader thank yall!
    Curtis Jendro wrote on Thursday, May 07, 2009 (PDT):
  • I have a 1955 Int. 300 Utility with front loader and rear hydro. I am very pleased in its capabilities!
    Greg Paine wrote on Tuesday, April 07, 2009 (PDT):
  • Looking for a starter ring gear for my 300 Utility. Any Ideas
    Reggie Veal wrote on Sunday, April 05, 2009 (PDT):
  • I believe I have a 300 series, but I am not sure of the year, it looks like the one pictured, but it is yellow. Where can I find parts Thanks
    Ted Kasiewicz wrote on Thursday, April 02, 2009 (PDT):
  • I have a 1954 utility 300. The previous owner used 80-90w gear oil for the trans. I know it gets water and freezes during cold temp is a common problem with this model. Case makes a hytrans fluid I heard is the newer replacement. Is this true and can I use TSC hytrans fluid or something cheaper instead Thanks for your input.
    brian wrote on Sunday, March 15, 2009 (PDT):
  • 350 utility with buket gas machine good shape, but third gears going out whats a fair price guy wants 1500 is that good
    Duane Moffitt wrote on Thursday, December 11, 2008 (PST):
  • Just purchased 1958 IH 300 Utility. Dose it have a frost plug and where is it located
    troy johnson wrote on Wednesday, July 23, 2008 (PDT):
  • i have a 350 utility with brush hog, gas rig. I nmeed a carb anyone know where i can get good used parts.........tsks troy
    melissa killingbeck wrote on Saturday, July 19, 2008 (PDT):
  • I have a 1957 international 300 and want to restore it. i have all the implements and was wondering what it d be worth without a new paint job. its been converted from 6-12 volt
    abrewer wrote on Sunday, June 01, 2008 (PDT):
  • ineed some help to identify a tractor i bought and am having a hard time finding the model and year so i can find parts/ it is a international harvester has a c135 engine and have had no luck at the dealership i believe it is in the 1970s i am going to take a picture if i post it could someone please help me
    NEIL STRAWHORN wrote on Friday, May 02, 2008 (PDT):
  • I am looking for an oil filler cap for an IH 350 utility tractor. IH has retired the part and I have not had any luck at the salvage yards. Can anyone help me out
    becky wrote on Saturday, March 22, 2008 (PDT):
  • try the equipment superstore in wilmington , husband needs the steering shaft that the steering wheel mounts to and a radiator,if anyone could help it would be greatly appreciated.
    john boggan wrote on Saturday, February 09, 2008 (PST):
  • I need both steering shafts for a 1958 international 300 utility steering box. If any one knows where i could find them or a complete steering box,for a reasonable price i would be very greatfull.
    Richard wrote on Tuesday, December 18, 2007 (PST):
  • I am in need of schematic or wiring diagram that will help my father-n-law convert a 6 volt to 12 volt on a 1945 model h . Any help is very much appreciated. He said he was removing the 6 volt generator and replacing with a 12 volt alternator with built in regulator.
    Bill Vander Heyden wrote on Sunday, October 28, 2007 (PST):
  • I have a utility 300 which has a torque amplifier transmission. With the amplifier engaged, handel back the tractor occasionally will loose power to the wheels and has a noise from the transmission. I m thinking it s the over-running clutch causing the problem. Anyone have any thoughts on this Should this be the problem, where can I find the parts to repair it, or does someone have what I need.
    jimmy pilkey wrote on Tuesday, October 23, 2007 (PDT):
  • we are loading our international 300onto a barge we are wondering about what it weighs
    eric young wrote on Tuesday, September 11, 2007 (PDT):
  • i own both sytle of the 300 had the utility for many years used it for bailind hay and etc. only used the pair know for mowing with brush hog they work great. i have them for sale bought band new tractor to replace them also have and h and a c for sale.
    jerome namaste wrote on Wednesday, August 22, 2007 (PDT):
  • I purchesed IHC 300U about a year ago and did not haave any serious problems until recently. It had been converted from 6 to 12 volt system and it is now gone thru its second starter in a week. replaced the selenoid and all the wiring and cables. I Think it is a 55. I paid 5000 for the tractor and 8 implements and it has down pressure on both the busket and the three point.Any help would be greatly appreciated. Jerry in Bennett Wi
    john minihan wrote on Sunday, August 12, 2007 (PDT):
  • I have a 300 u I am starting to restore it runs great I would just like to find a source for parts . I live in upstate new york. Thanks
    bob b wrote on Tuesday, July 24, 2007 (PDT):
  • Just purchased a 56 or 57 not worried about the year 300 U and need a grille and the top clam shell of the hood that attaches to it and holds the ends of the side hood. As long as they aren t rusted out, I can use them. Think I have the same problem with the valve as another commenter, in that one valve has stuck due to the water flowing down the exhaust pipe! Will try to fix that valve and get her running. Have a front loader many welds on it, but functional for the 300 I would part with I have a Kubota for that work for a mere 500. It will need a ram for the bucket, and is a power up, gravity down system, but she works! Thanks and love these old tractors!!
    Willie J wrote on Thursday, July 19, 2007 (PDT):
  • My great uncle has a Case 300 Utility with an add on New Idea loader and powerstearing. The tractor is in great shape but the front end has a lot of play in it. When you back up the tires bow and sometimes flop over making the tractor nearly impossible to turn unless you go forward. I was wondering how to fix this problem. Any help would be a great help.
    Wally wrote on Sunday, July 15, 2007 (PDT):
  • Paul all my steering is on both sides. You have one arm from box to a wheel then a bar hooking both wheels together
    Paul wrote on Saturday, July 07, 2007 (PDT):
  • I ve had a Utility 300 for about a year and it works great. The fan belt went last week and when i pulled the radiator out to replace it, it appears the lower pulley is rubbing/grinding on part of the steering mechanism. I can t tell if something is bent or worn so i can t figure out how to fix it. Anybody have a suggestion thanks much!
    Wally wrote on Sunday, June 17, 2007 (PDT):
  • Like Tim,I am looking for a steering box also. Or parts. The right wheel does not turn when the left does.
    Wally wrote on Sunday, June 17, 2007 (PDT):
  • Like Tim,I am looking for a steering box also. Or parts. The right wheel does not turn when the left does.
    Tim wrote on Tuesday, May 15, 2007 (PDT):
  • I have a 300U I have been teying to find a steering box for can any one tell me were I can find one thanks a lot.
    Mike wrote on Friday, April 27, 2007 (PDT):
  • Looking to buy International 300. Never owned a tractor. Can anyone tell me what items to look at. He says the rubber is 80%, has 3 pt quick hitch, good metal. Asking 3500....has front loader.
    GREG MAC RAE wrote on Friday, March 16, 2007 (PST):
    wayne eakes wrote on Saturday, October 21, 2006 (PDT):
  • can someone tell me where to check trans and lift oil on a international 240 tractor please
    Charlie Fisher wrote on Tuesday, September 12, 2006 (PDT):
  • I am restoring a 1958 IH 350UD .Would anyone know the true colors and the code #s to order paint for this tractor.Also how to pull the jack shaft between the two clutches so i can remove the torque amplifier clutch.thank you....
    Kyle wrote on Wednesday, August 23, 2006 (PDT):
  • I just picked up a 300 Util., wondering how to determine the model year. Any help?
    BOB wrote on Monday, August 21, 2006 (PDT):
  • Just finished restoring a 1957 IH 330 utility and still need a Hyd pump Oem# 368633-R91 or 3698894-R92, also removed a Wagner backhoe and now looking for a complete PTO assy and 3 point hitch assy. Anyone know where I can locate these parts? Pls. E-Mail. Thanks
    Kara Schooley wrote on Wednesday, August 02, 2006 (PDT):
  • My dad is restoring a 300 utility and is unsure of the color scheme on the dash is everything in red or should there be some gray? Please help!!!
    Tom Wilfong wrote on Monday, July 17, 2006 (PDT):
  • I just bought an 300u. But i don't know where the serial nuber is if somebody could tell me where it is. I would like to know how to tell what year it is. Tom
    Rick Oswald wrote on Monday, July 10, 2006 (PDT):
  • I just picked up a IH 350 U Diesel that runs- has a front end loader and full hyraulics. Any ideas on what its worth? Thanks to any and all replies Rick
    jaack graham wrote on Friday, June 16, 2006 (PDT):
  • I'm looking for a distributor for a 240 utility International. Can't seem to find one anywhere. The inside plate that holds the points and condenser actually bent when the springs under it broke and bound the plate up. It also sheared the pin that holds the gear that drives the hour meter or rpm meter. Would sure appreciate some help. Thanks. Jack
    Kevin Goddard wrote on Wednesday, June 14, 2006 (PDT):
  • I'm looking for a detailed diagram for the hydraulics on a modle 300. Is there a pdf. file that has the details? Thanks Kevin
    Misty Thrash wrote on Sunday, June 11, 2006 (PDT):
  • My husband and I just bought a 340 series and we are wanting to find out some information about this tractor. If anyone could help me with this please email me back and let me know. It has a busch hog attachment and we just bought a farm and there are some things that we just don't know about this. Thank you for any help that you can provide about where the brake fluid goes or about manuals.
    Stephen Knight wrote on Wednesday, May 31, 2006 (PDT):
  • I'm currently working on a IH 350 utility Diesel and I need the 48 tooth Cam shaft gear and crank seal no one seems to have it. can any one help?
    bill traylor wrote on Friday, May 19, 2006 (PDT):
  • overheated and blew head gasket...does anybody know where to get head gasket for 300 utility IH
    carl britton wrote on Friday, May 19, 2006 (PDT):
  • i am begginer with the antique tractor thing so far i have a 1956 international 300 utility and i was wondering where the timing marks were on it, if somone could tell me i would appreciate it
    carl britton wrote on Friday, May 19, 2006 (PDT):
  • i am begginer with the antique tractor thing so far i have a 1956 international 300 utility and i was wondering where the timing marks were on it, if somone could tell me i would appreciate it
    John Mater wrote on Monday, May 08, 2006 (PDT):
  • I need a carburetor or rebuild kit for a International 300 utility. I would also be willing to sell the complete tractor, with front loader and backhoe. Located in lower Michigan.
    Randall goss wrote on Tuesday, April 25, 2006 (PDT):
  • Where can I find parts like a hood and front grill for the 300 utility Pleas e-mail me at randall at
    JIM MCKENZIE wrote on Saturday, April 22, 2006 (PDT):
  • I am looking for a 1955 300u ihc steering box.
    Robert Esteppe wrote on Saturday, April 22, 2006 (PDT):
  • Can you tell me where to get a shop manual to rebuild a International 300 Utility tractor?
    Gary wrote on Thursday, April 13, 2006 (PDT):
  • How much oil is needed in the transmission differential hydraulics on a Internation 300 Utility with a Front-end Loader?
    Jaime wrote on Tuesday, April 11, 2006 (PDT):
  • I have a 1955 or 1956 international 300 utility that I am looking to sell. Decent shape, runs well, good rubber, newer sheet metal work, located in SE WI. Anyone know a range of what it's worth? Anyone interested in it?
    carl britton wrote on Friday, April 07, 2006 (PDT):
  • i am begginer with the antique tractor thing so far i have a 1956 international 300 utility and i was wondering where the timing marks were on it, if somone could tell me i would appreciate it.
    carl britton wrote on Friday, April 07, 2006 (PDT):
  • i am begginer with the antique tractor thing so far i have a 1956 international 300 utility and i was wondering where the timing marks were on it, if somone could tell me i would appreciate it.
    Barb Hillman wrote on Friday, April 07, 2006 (PDT):
  • We have a 300 utility and it came without 3pt hitch tongs. Yestrday's Tractor has them but they don't ship to Canada. What other stores have them that ship to Canada?
    kevin wrote on Sunday, March 19, 2006 (PST):
  • i own an i/h 300 i just installed a 3pt hitch and added the hydraulics and hooked up... can anyone tell me what type of fluid i put in the transmission? i believe the transmission shares the same fluid with the rear hydraulics. is this correct? any info could help.
    mary kemp wrote on Sunday, March 12, 2006 (PST):
  • I am trying to locate a parts manual for a international harvester W 400 with a T/A. Can anyone give me a good website to go to so i can get a parts manual for my dad.
    Lane wrote on Sunday, March 05, 2006 (PST):
  • I have a 300 utility and I need to know what the compression of the engine should be. Any info would be appreciated thanks.
    Bob wrote on Thursday, March 02, 2006 (PST):
  • I'm looking for a hydraulic pump for my 1957 IH 330 utility. OEM # 368633-R91. Thanks
    Dale wrote on Saturday, February 25, 2006 (PST):
  • I'm looking for a power steering unit for my 330 IH if anyone knows where I could locate one, please e-mail me. Thanks.
    KEVIN wrote on Friday, February 24, 2006 (PST):
  • i purchased a 300 utility ih with no hitch, i purchased a 3pt hitch... it has 2 cylinders. one on each side. my valve on the left has 2 hoses on it that go to the rear. any advise on hooking up hydraulic hose to allow upward and downward motion. thanks
    Randall wrote on Friday, February 10, 2006 (PST):
  • I thank I have a 1950 International 300 utility tractor how can I find out witch motor it has my parts store showes two. and how can I tell what year it is it looks lick a 1950 but I would like to know forshower and what is the horse power. hank you Randall
    Mike K wrote on Wednesday, January 25, 2006 (PST):
  • Sounds like I'm not the only one with 300 U, manuel steering box problems. Does any one have one for sale by chance? Or know of a salvage yard that sells over the net? Any help would be appreacated, Thanks
    mando frausto wrote on Friday, January 06, 2006 (PST):
  • parts for ih 3414 located in texas
    Lane Stanley wrote on Sunday, January 01, 2006 (PST):
  • Eric k -I have a 300 utility with a ta. That compartment is where the ta clutch goes.
    eric k wrote on Monday, November 14, 2005 (PST):
  • I own a 300u,no ta. What is the plate in front of the shifter for? when taken off seems to be a compartment that the trans input shaft goes thru but theres no fluid or anything else there, originally thought it was for filling the trans case but found out thats not what its for. Any info would be geatly appriciated
    George Schwartz wrote on Thursday, November 10, 2005 (PST):
  • I need a manual for a inc 460 dsl with a wagner loader-backhoe. If you know of one please reply
    greg black wrote on Monday, October 31, 2005 (PST):
  • I have a 240U IH looking for a front end loader that will fit it i live in mississippi
    Steve Culver wrote on Thursday, October 20, 2005 (PDT):
  • I'm looking for a "dirt plate" attachment for an International manure bucket. This unit slips over the front forks of the bucket. I'm using this International loader on my IH 350 High-Utility. I'm located in mid-Michigan. I'm hoping to find one within reasonable driving distance.
    mark wrote on Sunday, October 16, 2005 (PDT):
  • I am seeking a worm gear and steering wheel for a 1957 300 utility. Does anyone know where I might locate these parts? Thanks.
    David wrote on Sunday, October 16, 2005 (PDT):
  • Binder books .com has actual manual reprints for this and many other IH tractors
    John wrote on Saturday, October 01, 2005 (PDT):
  • Ron D - It takes HyTrans. Any brand will do. Your case dealer will have the good stuff. The Torque Amplifier requires more fluid in the main gearbox fill (sitting on the tractor, large 3/4" square drive to the left of the stick shift). It draws from the same gearbox. The gear box capacity with the TA is 7 gallons.
    martinmckinlay Pictou County Nova Scotia wrote on Sunday, September 18, 2005 (PDT):
  • I have a 300 utily . Cranks shot anyone interested in the me martinmckinlay at
    RON D. wrote on Thursday, September 15, 2005 (PDT):
    Rick J from Oklahoma wrote on Sunday, August 14, 2005 (PDT):
  • I am looking for information on a Seaman Pulvi Mixer tractor. I would like to find a manual, parts distributor, and to find anything about attachments available. I would like to find out how to get the year of the tractor, is it possible to tell by the serial numbers?
    Lance wrote on Thursday, July 21, 2005 (PDT):
  • My Grandfather purched his 300 utility brand new when they came out in the 50's. Now it has been passed to me. I still use it to bushhog. blade, and still feed round bales with it, but I'm having a problem keeping the float in the carb from sticking, the gas overfloes into the motor. Every time I turn it off, I have to turn the fuel off. Does anyone know of anything that may solve my problem.
    john wrote on Monday, July 18, 2005 (PDT):
  • need some parts for a 300u. does anyone know of a salvage that might have some.
    Julie wrote on Friday, July 15, 2005 (PDT):
  • I have a 1954 international 300 utility tractor i want to sell. Its been sitting for 3 years,It started right up today and runs real good. It has alot of rust and needs a 'O' ring for the hydrolic pump as it leeks, it has weather damaged tyres and a home made red iron box blade. What i would like to know is how much can i sell it for. thanks for any help.
    Dave wrote on Tuesday, July 12, 2005 (PDT):
  • Hey Lloyd, Have you tried the Tractor Supply Company
    MC wrote on Sunday, June 26, 2005 (PDT):
  • I have just purchased a IH 3414 Diesel Backhoe, would like to know the weight and length. I need this info for hauling this tractor home. Thanks for any info. MC
    dick meier wrote on Monday, June 13, 2005 (PDT):
  • i am looking to buy a backhoe for my international 300 utility in oregon or washington state area
    Lloyd wrote on Thursday, May 19, 2005 (PDT):
  • I own a 300 utility. My INTERNATIONAL emblem is broken, does anyone know where to get them repaired or replaced. Thanks
    Earl Barnett wrote on Saturday, May 14, 2005 (PDT):
  • I have a Farmall 350 Utility and would like to replace the standard steering with power steering. Does anyone know where one of these is which is on or off a salvage tractor? Thanks so much.
    EWA wrote on Monday, May 09, 2005 (PDT):
  • I have a Farmall 300 row corp that I keep running. The serial numbers don't match any of the books. It has 28714 PJ on the aluminum plate, and 358046R2 on the engine block. I am interested in finding oil and air filters, but would like to know what year it might be. The has 300 on the side with Torque Amplifier logo also.
    DAN wrote on Friday, May 06, 2005 (PDT):
    Lil Joe wrote on Wednesday, May 04, 2005 (PDT):
  • I have an international f/loader-backhoe 340 industrial. Can anyone tell me what years they we made and where can I buy parts? I need a starter, flywheel ring gear, and some seals for the hyd. cylinders.
    P.Keenan wrote on Thursday, April 28, 2005 (PDT):
  • I have a 300 utility that needs carb work I think It ran fine in the fall but now its backfiring and blowing blue flames out the top and will only rev with the choke out can anyone tell me whats happening. Thanks
    JIM wrote on Monday, April 25, 2005 (PDT):
  • I have a 300 utility that has power stearing that does not work. before I start to take it apart does anyone have information about how it works or what goes wrong with it. thank you any help would be appreciated.
    DANNY wrote on Tuesday, April 12, 2005 (PDT):
    Charlie wrote on Sunday, March 20, 2005 (PST):
  • Have a chance to buy a International 350 gas utility for $2100. It has a homebuilt loader (loader works, but not pretty and needs some help). Is this a good price? Shows 2700 hours, has 2 pt hitch, T/A appears to work, 12 V conversion, no powersteering. Is there a good way to check condition of T/A?
    Chad wrote on Sunday, March 13, 2005 (PST):
  • I have recently purchased a 300 Utility. Any suggestions on the steering? Currently, there is about 3/4 of a turn of play in the steering. I have been told to adjust the nut and slotted bolt on the sides of the steering column but this only made the steering wheel harder to turn.
    KGR wrote on Sunday, March 13, 2005 (PST):
  • I am looking to purchase 300 utility. live in southern WI
    KGR wrote on Sunday, March 13, 2005 (PST):
  • I am looking to purchase 300 utility. live in southern WI
    greg wrote on Saturday, March 05, 2005 (PST):
  • Hi i have a 300 utility tractor and the pto wont stop turning there is a handle on the right side but it doesent seem to work does anyone know about this or maybe send me a picture of the inside of pto or know where i can get help Thanks from niagara falls ont
    dick wrote on Thursday, February 10, 2005 (PST):
  • i am looking for a back-hoe, blade. or brush-hog for a international 300 utility, i live in nw oregon. thanks
    richard wrote on Saturday, February 05, 2005 (PST):
  • i would like to buy a front loader for a international utility 300 I'm in southeast idaho. any help?
    Dwight wrote on Saturday, January 22, 2005 (PST):
  • I am looking for a 300 or 350 International Utility with a front end loader. Needs to be good running order. Cosmetics unimportant. I'm located in western dakota. Any help appreciated.
    TDK wrote on Thursday, January 06, 2005 (PST):
  • CLAY-350U Diesel
    TDK wrote on Thursday, January 06, 2005 (PST):
  • CLAY (350U Diesel)- the above e-mail will not work!!!!!!!!!!!!!!!!!!!
    Curt Zielke wrote on Thursday, January 06, 2005 (PST):
  • I just purchased a 300 international utility tractor and would like to know what size plow it would be able to pull through sod. It does have a TA but I'm not sure if it works. Also, does anyone out there know what color these are supposed to be. I think its orange with white rims and a white grill. Any information I can get will be greatly appreciated. Thanks.
    clay wrote on Friday, December 31, 2004 (PST):
  • I have a international 350 diesel can't find much info on it. If anybody could help i would like to know where the serial no. is located and where i could find reasonabley priced engine parts. Somewhere around east tennessee, thanks.
    Davy wrote on Thursday, December 16, 2004 (PST):
  • I have a 300 utility, want to change over from 6 volt to 12 volt. Generator to Altenator. Good Idea or what. If good, is there a kit or do I piece it together myself.
    Larry Muirhed wrote on Saturday, December 11, 2004 (PST):
  • I have a tractor trying to find a rim unsure of make &model of it by loking at some pics looks like IH 300 series con some one tell me where tofind a seril or model number Thank you Larry Muirhead
    Herb wrote on Wednesday, December 01, 2004 (PST):
  • I own an International B275 Tractor and am looking for a Governor Diaphragm. Engine No. 75l 609 R3. If anyone knows where i can get one of these - would you email. I would greatly appreciate any help on this.
    betty gahagan wrote on Monday, November 22, 2004 (PST):
  • Hi all you tractor people question where is the best place to sell tractor books small toy water loo boys 1/16 w9 lots of manuals lots of tractor books antique ones
    Louie wrote on Monday, November 15, 2004 (PST):
  • I have a 1958 IH 350 High Utility tractor in good condition. I was just wondering what would be a fair selling price to ask for?
    John Gleason wrote on Thursday, October 28, 2004 (PDT):
  • How do I get information on a tractor listed in your listings.I'am trying to find out information about a front loader for a International 300 utility tractor.I would apprecepiate any help that you can give me. thank you. John
    J. R . ALLEN wrote on Tuesday, October 12, 2004 (PDT):
  • does anyone out there have any information on a B-275 international diesel utility tractor. i am in middle tennessee and no one anound here has heard of it.
    peg wrote on Saturday, September 18, 2004 (PDT):
  • i have two 350 utility tractors. i have a leak in transmission i need to add oil but don't know the kind of oil or how much to put in. no top port or mark. should i fill it or half way? it,s just under half now. can someone halp? thanks
    Steck wrote on Friday, August 27, 2004 (PDT):
  • I have a 1955 300U, but the steering box is bad. Talking to the shops here in Minnesota they say it's common because of the design. Would like to convert to power stearing, but tough to find parts for either. If anyone has converted one from manual to power and still have the manual box in working condition, I'm looking. I was told by one salvage yard to find an IH715 combine and take all the hydrostatic steering components and put them on my tractor. Basically a servo control under the steering wheel (old gear box and linkages get removed)and you mount a hyd.ram on the front. Anyone done this, or seen it done.
    Steve wrote on Tuesday, August 24, 2004 (PDT):
  • looking to add a 3pt hitch to my 300 56 utility would like any help you could give me. I love this tractor it has alot of heart.
    Brendan wrote on Monday, August 09, 2004 (PDT):
  • I have for sale a 300u .2pnt. w/3pnt. conversion.Comes with 2pnt. blade,2pnt. 3bottom plow,3pnt. cultivator,wheel weights and chains.Runs great & is complete but TA does not work.TA is in high so this is not a problem for useing this tractor.Located in North Dakota.
    TOM wrote on Thursday, July 29, 2004 (PDT):
  • I need an hydraulic pump, anyone have a working one for sale!
    john jimerson wrote on Monday, July 12, 2004 (PDT):
  • looking for a front loader for a 1957 240 IH utility. Reasonable and in the northern Ca. area. I am interested in selling this tractor when I have finished my property upgrades. Please send any interest and bids. Pictures are available.
    adrian wrote on Friday, July 02, 2004 (PDT):
  • looking for emblems for a 350 utility(2-International for the hood,1-350 utility) any help would be greatly appreciated. Thank you adrian
    Brian wrote on Thursday, June 24, 2004 (PDT):
  • I recently perchased A International 300 u , does it have a live pto and if not can it be modified.
    mark wrote on Monday, May 31, 2004 (PDT):
  • have for sale a 1958 350 high utilty,runs good,bad ta,std drawbar,man steering,brand new rims and tires in rear,new tires up front
    KEVIN M CUNNINGHAM wrote on Thursday, May 27, 2004 (PDT):
  • i have a 1959 international utilty tractor with a front loader and backhoe i would like to see a picture of what one looked like new before i start to restore it
    James L Butcher wrote on Tuesday, May 25, 2004 (PDT):
  • I had one on the farm when I was a kid. I always liked the tractor, and was wondering if anyone else had anymore pictures they would like to share with me. Thank you!!
    Janet wrote on Monday, May 10, 2004 (PDT):
  • I have a 1964 International tractor that my husband purchased from the federal government. I finally got it running and now want to sell it. I think the PTO needs fluids but I have no clue as to type and quantity and just exactly where do I get it into the system. Any help will be appreciated. I'm trying to sell the tractor and want everything operational. Thanks
    d. masters wrote on Saturday, April 24, 2004 (PDT):
  • anyone have a 240 or 340 for sale in iowa or mo. good shape?
    Carmen wrote on Thursday, April 15, 2004 (PDT):
  • Could anyone tell me what I can sell a Farmall 230 tractor with bush hog and blade for?
    Orin Jones wrote on Saturday, March 13, 2004 (PST):
  • Recently purchased an International Utility 300 with a front end loader that I believe is a 1955. The Sr. No. 19077. I have a Gannon scraper that I want to attach, I believe I have a two point hitch with a hydrolic ram, need the necessary parts, I live in southern Calif. Can anyone point me in the right direction? Thanks
    walt wrote on Wednesday, January 28, 2004 (PST):
  • i956 international 300u for sale w/5ft hog runs perfect has 3pt hitch rear wheel weights and is in pretty good shape all around will sell for 1800.00 will not seperate
    Dan Bierman wrote on Saturday, December 20, 2003 (PST):
  • I'm looking at buying a 1955 300 utility, loader backhoe(Wagner). Can anyone tell me about a quick disconnect system for the backhoe, so that I can utilize 3 point equipment? Thanks
    Russ M wrote on Friday, December 05, 2003 (PST):
  • I have a 300 Utility that I think is from 1958. Gas tractor with torque amplifier. Is is possible to add power steering without breaking the bank? Because pushing snow with this old girl is breaking my arms. Thanks
    Josh Walters wrote on Monday, December 01, 2003 (PST):
  • I have a loader off of a 300 utility that I am willing to part with. Offers are welcome. I am interested in some information on the hydraulic system for adding power steering! Please help
    Jon wrote on Friday, October 31, 2003 (PST):
  • 56 IH 300, I need a 3 point hitch conversion kit. Any reccomendations?
    Mitch wrote on Friday, October 17, 2003 (PDT):
  • I have an IH 340 Utility with front end loader. I'm looking to sell to obtain a FWD. Good shape, looks great, can e-mail pics.
    Ed gaskill wrote on Sunday, October 12, 2003 (PDT):
  • My dad has a350 utility deisel. I think the serial#is 360553rs d. Does anyone know what year thiis would be? He also has some equipment for sell. Baler,combine,rake,plow disc.S.W.Pennsylvainia
    Charles Salyers wrote on Saturday, October 04, 2003 (PDT):
  • I am looking for a frontend loader for 300 utility any help would be appreciated in Ohio.
    Charlie Francisco wrote on Thursday, September 18, 2003 (PDT):
  • Sept. 18, 2003 I have a 300 IH Utility w/loader. This is an awesome machine that I used a lot. Unfortunately the steering geer is broken. It has manual steering. I haven't removed it yet since the steering wheel will undoubtedly need to be cut off. It appears it was repaired before. I'm sure it was out of time since turning radius was restricted to the left. Can someone give me a lead on new or used parts? Also, any retro hydraulic steering available? Best regards, Charlie Francisco
    Alvin wrote on Friday, July 04, 2003 (PDT):
  • I have an International 300 with an TA, 2 point hitch and single front tire. We are getting to an age when we have too much around. We are willing to sell if anyone is interested. We live in central Idaho.
    James Walker wrote on Monday, June 30, 2003 (PDT):
  • I am having carburator problems and need a good source for rebuild parts.
    Mike Richardson wrote on Sunday, June 22, 2003 (PDT):
  • I have 350 int utility with front end loaded and front pump the rear seal on the pump keeps blowing can anyone help.
    Mark Fowler wrote on Sunday, June 15, 2003 (PDT):
  • Own a 1956 300U. When hot, starts missing and backfiring. So a complete tune-up was done, including oil change. Again, once hot, does the same thing. I must then wait until cool in order to start again. I did notice a slight anti-freeze leak. Could this be the problem, or a bad coil? Please Help. Thanks.
    SuperDave wrote on Monday, June 02, 2003 (PDT):
  • I just purchased an old IH that I think is a 300-U but am not sure. The plate on the clutch housing has been basically sanded away except for the serial number. #9782. There is a stamp on the side of the block 175 and another that is *1*26*C I think. It is hard to read for all of the old paint. There is another number on the trans housing 360553 R3. any info would be great
    ross wrote on Tuesday, May 20, 2003 (PDT):
  • I have a international 300 utility tractor and the starter does not seem to work any more,and when i did start it it only seemed to fire on two cylenders. does anyone have any sugestions?
    texaco wrote on Friday, April 25, 2003 (PDT):
  • Big GAS HOG, I used one for seven (7) years. Used 3 gallions per hour. Very good power for its size.
    John Graff wrote on Sunday, April 06, 2003 (PDT):
  • looking for a hydrolic pump for a 350 utility set up for farming,(no loader or Backhoe)any help would be great.
    Steve Watkins wrote on Monday, March 31, 2003 (PST):
  • I recently purchased a IH 300 Utility. Can anyone tell me where to find engine specs for tune ups etc. Any websites? Steve Watkins megawat1 at
    Ryan wrote on Friday, March 28, 2003 (PST):
  • I was given a IH 300 Utility Tractor by my father. I am wanted to replace the gas fuel tank that is in bad shape and am having trouble finding one. If anyone has or knows where to get one please let me know, thanks. This is just the begining of the restoration of the this tractor so any comments would be very helpful.
    Derwin wrote on Thursday, March 27, 2003 (PST):
  • LOOKING FOR PARTS! Can you buy rebuild kits for the power steering units? How about pins for a backhoe unit? Does anyone know how hard it is to replace the seals in the hydro cylinders.
    O.B. Works wrote on Wednesday, March 26, 2003 (PST):
  • I have One that looks similar to the picture...the only numbers attached to the engine plate are "15945 SJ" also a casting number on the transmission housing 360 486 R3 any help with the year or model would be appreciated.
    Bruce Kent wrote on Tuesday, March 25, 2003 (PST):
  • I just bought a 300 utility runs great but i can not stop the hyd. pump from pumping and lugging down the motor. When the hand valves are in neutral position it still wants to bogg the moter down . Any ideas ? Please help
    Davy wrote on Monday, March 24, 2003 (PST):
  • thanks for the info Andy
    Davy wrote on Monday, March 24, 2003 (PST):
  • thanks for the info Andy
    andy wrote on Saturday, March 22, 2003 (PST):
  • CHAD;look for re-prints of original owner/operator manuals at your local I.H. dealer, I found mine there. DAVY; 2 point is same as fast hitch. No new sales that I know of. Look at the sales,auction sights linked to this web-sight, also auctions and local I.H. dealer trade-ins. GREG; the only thing rare about the tractor is the fact that the TA is still working. Most no longer work, but tractor is not affected by lack of working TA, they still will run forever. Just be ready to give it plenty to drink, they burn alot of gas. About the loader, not sure, think it's the I.H. model 3000 see some entries above in this column. Many questions will be answered.
    Greg Bonnell wrote on Friday, March 21, 2003 (PST):
  • I'm about to buy a 300 Utility for $2500. It's got a wide front, live lift, independent PTO and Torque Amplifier. Were all three of these standard equipment or did I stumble on a rare one? The TA seems to work great... is the old TA reliable? What is a good loader match? I appreciate any input from any 300-club veterans. I'm a rookie here.
    HOWARD ROOKER wrote on Friday, March 21, 2003 (PST):
    davy wrote on Friday, March 21, 2003 (PST):
  • I have a 300 utility. Equipped with a fast hitch. Is this the same as a 2pt. hitch. Also, where can I located fast hitch implements. Also looking for a front end loader. Preferably close to Maryland.
    Davy wrote on Thursday, March 20, 2003 (PST):
  • I have a 300 utility. Equipped with a fast hitch. Is this the same as a 2 pt. hitch. Also, where can I find fast hitch implements.
    chad skelton wrote on Monday, March 17, 2003 (PST):
  • i own a 300 utility . great tractor.does all the small time farming that is necessary,baling plowing,the works. paid 4000 with plows brush hog, back blade, wheel wheights looking for an operators manual if anyone comes across one thanks
    Derwin wrote on Thursday, March 06, 2003 (PST):
  • I found a 300 utility with a loader and back hoe (gas) for 3000. I'm gone to go loook at this weekend and was wonder if any one could point out some key thinks to look for. I plan to use to around my property to dig foundations and drains ditches. Will this tractor do the job. Any input would be nice. Thanks.
    David wrote on Wednesday, February 19, 2003 (PST):
  • I need the butterfly assembly for the choke on my IH300U carburetor (gasoline). The backfire flapper is gone and you can guess where it went.Does anyone know where I can get any carb. parts. Thanks
    James Brown wrote on Saturday, February 08, 2003 (PST):
  • I have purchased an International tractor with front bucket(IH3000) and backhoe. The serial# is 3555-n-z-gg. I need to identify the year and series. Can anyone help? It looks sortof like a 340 industrial. Thank you
    James Brown wrote on Saturday, February 08, 2003 (PST):
  • I have purchased an International tractor with front bucket(IH3000) and backhoe. The serial# is 3555-n-z-gg. I need to identify the year and series. Can anyone help? It looks sortof like a 340. Thank you
    Scott wrote on Friday, February 07, 2003 (PST):
  • Marlo- I am interesed in your IH300.. Your email address keeps sending messages back.. unknown mailbox.. Please contact me.
    Scott wrote on Thursday, February 06, 2003 (PST):
  • I recently purchased an Int. 300 or so I think it is it has no T/A and is in good shape my serial# is 360486-R2 is this really a 300 and what year?
    Marlo wrote on Friday, January 31, 2003 (PST):
  • I just recently purchased IH 300 with backhoe and loader to do some dirt work. Realized it is too small for my needs. Sell for what I bought it for $1250. marlobuilders at
    Jim E wrote on Saturday, January 25, 2003 (PST):
  • what years did they manufacture the 350 utility,and can you tell me what serial# corresponds with what year, thanks jim
    Mike wrote on Tuesday, January 07, 2003 (PST):
  • I have a co-worker that is looking for the value of a 330. He said it was a limited production. He is the original owner can any one help me?
    fussell wrote on Wednesday, January 01, 2003 (PST):
  • I have an IH 300 industrial- not utility does anyone know anything about them?
    Keith Barkley wrote on Tuesday, December 17, 2002 (PST):
  • I have a 300 Utility that is in great shape except that the TA is out of order. I am putting it on my brothers farm sale January 24, 2003.
    Ken B ( S. W. Pa.) wrote on Friday, November 22, 2002 (PST):
  • I have a front loader for a IH300,330, 340,or 350 utility I would like to sell.I also may be interested in selling a IH 300 utility that runs good. Contact me for more info.
    Todd Burlock wrote on Saturday, November 09, 2002 (PST):
  • Have 300 utility with a 2 point hitch want to make it into a 3 point,it's a good tractor and this would make it better. HELP!
    MARK A SCHROEDER wrote on Sunday, October 27, 2002 (PST):
  • I have an IH 300 utility with PTO, 2-point hitch, and front-end loader for sale. Will sell loader separatly. Can call 419-532-3259 for more info.
    Lance H. (Texas) wrote on Saturday, October 26, 2002 (PDT):
  • Am in the process of restoring a 1955 International 300 Utility (that my father purchased new), and have questions on the stainless steel names that attatch to the hood. Is the background painted between the letters on the following words, and if so, what colors; 1. utility 2. 300 3. International 4. Torque Amplifier Also, am looking for the metal battery top (cover), and the IH stainless emblem that fits the top front of hood. Any information on where to locate these items would be greatly appreciated. Also, have located a very good source for complete set of decals for IH 300 & other IH tractors. Contact me for this information. Thank you for your considerations.
    JimB in Texas wrote on Sunday, October 20, 2002 (PDT):
  • I have a IH 444 missing side panels and need some other replacement parts. Would appreciate information to where I might locate panels and parts.
    Paul Anderson wrote on Thursday, October 10, 2002 (PDT):
  • I have an International 300 for sale. I belive it to be from 1954. It is in great shape - has a front end loader, an additional snow bucket, rear tire chains, pto. I am asking $3200.
    tom wrote on Sunday, September 22, 2002 (PDT):
  • just purchased a 58' 340, does any one have any parts they might what to get rid of for same. also looking if any one has a three point hitch for a 340. all e's will be answered.
    Bud wrote on Saturday, September 21, 2002 (PDT):
  • I have a 240 Utility for sale. Front end loader, engine runs, good sheet metal. It needs some work. Great parts tractor or project tractor. Tucson, Arizona. $800
    Peter wrote on Wednesday, August 21, 2002 (PDT):
  • My father-in-law owns an International 350 Utility with Power Amplifier. Does anyone know what horsepower they got? The tach shows 2400 hours. Any idea on the value?
    Doug Brinkley wrote on Saturday, July 27, 2002 (PDT):
  • I have a 300 international (just purchased). Just put in a new battery and selenoid and it will not start or turn-over with the switch key. The only way to start it is to press the button on the bottom of the selenoid. Is this the way it should start or should it start by turning the key?
    Jim wrote on Friday, July 19, 2002 (PDT):
  • I have a 56 300 IH utility that my dad bought in 1958. We used it to farm for many years. It is still in very good condition except for the PTO will not stay engaged. My dad (before he passed) wired a stiff spring to the on-off lever to hold it up and keep the PTO turning. Can anyone help me with info about repairing the problem so that I can eliminate the spring? I would also like to find a power unit to convert from manual steering.
    Harry wrote on Monday, July 08, 2002 (PDT):
  • I'm needing a back wheel for a 300 utility. I am located in middle Tennessee. Does anyone know of a salvage yard in the area?
    Pat Rosato wrote on Thursday, July 04, 2002 (PDT):
  • Assuming you still have the lever behind the driver's seat which controls the PTO, check to see if it is bent. It might not be shutting off completely. Mine is very stiff and I have to work at it to turn it on and shut it off. I have a 1955 IH300.
    tyler wrote on Tuesday, July 02, 2002 (PDT):
  • I have a 56 IH 300 utility does anyones pto keep turning after disengaged. can you tell me how to stop it
    G.D. Acuncius wrote on Monday, July 01, 2002 (PDT):
  • I have purchased an IH B275 Diesel any info would be appreciated.
    Pat Rosato wrote on Friday, June 28, 2002 (PDT):
  • Chuck.........if it still has a 6 volt battery, the left side is the positive side and that gets hooked up to the negative post on the battery. 6 volt batteries are installed in reverse. Positive post of the battery gets hooked up to the ground on the right side. On the right side of the tractor you will find a number on the side of the engine, Example; 5-14-A. That means it was made on May 14. The tractor serial number is on the right side on a plate attached to the clutch housing and will be a four digit number, like 6855. The engine serial number is located on the right side of the engine crankcase and will look something like C-169-22713. The C-169 means it is a carburated engine with a 169 cubic inch piston displacement. Hope this helps.
    Pat Rosato wrote on Friday, June 28, 2002 (PDT):
  • Dave.......Horsepower is between 35 and 40.
    Chuck wrote on Friday, June 28, 2002 (PDT):
  • I am working on trying to get a international 300 utility running. I just replaced the battery, but I am not sure which polarity is ground. Could anyone help me out here? I have no clue as of the year of the tractor, just that it is old. My dad had it running a few years ago, I just worked on fixing the fuel bowl, and replacing the battery, not sure about the carb yet, the points look good but not sure if it even fires.. want to make sure the battery is hooked up correct first.
    tim seaman wrote on Tuesday, June 25, 2002 (PDT):
  • Does anyone know how to set up a governor linkage between throttle and rockershaft. The adjusting block at throttle shaft has been disconnected and I'm not certain if there should be some minimum tension on governor spring to hold in minumum open position. Any help would be appreciated. Thanks in advance, Tim
    Dave wrote on Monday, June 24, 2002 (PDT):
  • Does anyone know how much HP an International 300 tractor produces?
    Joe Sherman wrote on Tuesday, June 18, 2002 (PDT):
  • My father needed help with his International 300 with 3-pt. hitch and PTO. Hydraulic oil was leaking into the crankcase so I pulled the pump and replaced the front seal (just behind the helix drive gear. The pump is attached to the right side of the engine case, just below the generator. The distributor attaches and is driven from the hyd. pump. The hydraulics for the 3pt. hitch worked last year but now they don't. I only changed the front seal and put everything back together correctly. It seems we get no pressure from the pump. The hydraulics worked last year and I wonder if the pump is the problem or is it the control valve located on the right side of the hyd. oil tank next to the right fender. The tank is below the driver seat. I found a bleed screw on top of the pump and tried to fill it when stopped and also when running to bleed the system. No luck. There was a spring under the bleed screw, not sure why. The manual does not have any good illustrations of the system. There are two small pipe plugs on the tank, near where the solid supply and return lines to the pump attach, but I don't know which is which - I assume these are for attaching a pressure guage for troubleshooting. I suspect the control valve has a relief valve internal, but not sure. If the pressure relief is open then that is probably why I have no pressure. But like Dad says, "It worked before." If anyone has any suggestions please email me. I was real careful to do everything right and the hydraulic oil reservoir is full. I just do not know why the hydraulics aren't working. The control valve 'feels' normal as you can lift and lower the handle into the up, down, and center positions. Please help. Thanks.
    ANDY SIGN wrote on Wednesday, June 12, 2002 (PDT):
  • To Hazen;I havn't found any ps units for the 300's. You will have to locate a salvage tractor and part it out.
    Hazen wrote on Sunday, June 09, 2002 (PDT):
  • My father has a utility 300 and would like to add power steering,were could he find info. on getting one.
    IowaBoy wrote on Friday, June 07, 2002 (PDT):
  • We are still using a International 350 High Utility tractor (wide front end)in the fields to cultivate or haul round bales. Hydraulic two point hitch and PTO. Serial #16110. What year would that be? What's it worth? Your welcome to bid on it. We reserve the right to reject any or all bids.
    ANDY SIGN wrote on Thursday, June 06, 2002 (PDT):
  • Hey, I just found this place! A good source of info can be found at your nearest CASE IH DEALER. I purchased the 300 Utility Tractor Operators Manual part # 10044R4 for under $30 dollars. To all those wondering what year their 300 is, they were only produced in 1955 and 1956. The serial number if you can make it out is stamped on the nameplate located on the right side of the clutch housing. Numbers 501 to 20218 were made in 1955. Numbers 20219 to 33064 were made in 1956. I have a 1955, and would like to find a loader for it.
    Sparky wrote on Sunday, June 02, 2002 (PDT):
  • I've not seen a lot of mail that addresses the 240 utility. What was their primary purpose? Is it a sound tractor? How many were made? Horse power? I have an opportunity to pick one up dirt cheap. The tractor has been inside its entire life and appears to be sound.
    charles wrote on Thursday, May 30, 2002 (PDT):
  • i have a 300 utility and reversed the fly wheel and now i seem to be having trouble remembering how the clutch and throw out bering go back in. I'M NOT A MECHANIC but i had to try. i'm getting way behind and need this work horse running again thanks
    Pat Rosato wrote on Tuesday, May 28, 2002 (PDT):
  • I found the serial number for my 1955 Utility 300, it is #6758. The engine # is C-169-20312. Can anybody give me some history? Also, I may be interested in selling it.
    Ken wrote on Wednesday, May 22, 2002 (PDT):
  • I just bought a 350 for $2000 in very good shape. Straight sheet metal, all the parts in place and hydraulic three point. I would like to know if anyone can steer me where to go to get a manul and where I might case down the serial number to find out its year
    Matthew Gluth wrote on Thursday, May 16, 2002 (PDT):
  • I'm looking to find how much a 1950's IH 350 utility with loader and backhoe weighs, can anyone help me?
    GOOBERJIM wrote on Friday, May 10, 2002 (PDT):
  • 300 utility Looking for a loader. Know nothing.Any help would be greatly appreciated. Thanx GOOB.;}
    Pat Rosato wrote on Wednesday, May 08, 2002 (PDT):
  • I have a IH Utility 300, 1955 I beleive, FOund a number on the side of the transmission housing 360553-R3 and another number 5-19-A. Can anybody tell me anything about this tractor? I bought it in 1996 and have used it every day on the ranch for a variety of tasks.
    Jim wrote on Monday, May 06, 2002 (PDT):
  • I have a 1956 Farmall 300 RC which I use primarily to pull a 7 foot mower to cut my lawn. It has developed a dull or hollow sounding knock in the right real axel housing. It seems to occur with each revolution of the wheel. Not a tractor genius and am wondering what this could be and what it might take to repair it - if it needs to be repaired. I have seen it leak a bit of 80 weight oil when it sits over night from the same asre where the knock seems to be coming from. I have kept the grease nipple full. Would like to know how serious this may be and how best to fix it. Thanks
    JAMES H. HANCOCK wrote on Sunday, April 28, 2002 (PDT):
    don attridge wrote on Sunday, April 14, 2002 (PDT):
  • recently bought 340 utility(1958?).runs beautiful.gas driven.has front end loaderwith manual steering.would like to change to power steering.very hard to find parts.does anybody know if other models fit this?any feedback would be appreciated.9056270903
    LARRYMILLER wrote on Thursday, April 11, 2002 (PDT):
    Rick Kiel wrote on Sunday, April 07, 2002 (PDT):
  • I need a fast hitch for an International 330 utility, please let me know where I might find one and the cost. Thanks
    Peter Palmblad wrote on Sunday, March 31, 2002 (PST):
  • I have a 1956 International 300 Utility tractor for sale. Has fast hitch, PTO, fenders, lights, decent paint, runs great, doesn't smoke. Tires 40% steering a little loose. Will take $2495.00 or B/O for it.
    l hutchison wrote on Monday, March 18, 2002 (PST):
  • I have 350u woud like to find blad for it
    l hutchison wrote on Monday, March 18, 2002 (PST):
  • I have 350u woud like to find blad for it
    Steve M wrote on Sunday, March 17, 2002 (PST):
  • I found a International 300 that I can purchase. May not be running, but that is ok. What is the specs for this tractor. HP? Does it have live PTO and Hydraulics. This one does come with a loader, not sure of serial number yet.
    Paul Thale wrote on Tuesday, March 12, 2002 (PST):
  • I have a 300 utility and am looking for someone who is familiar with the hydraulics on them. I would like to run a post pounder from existing hydraulics without having to disconnect a hose and then connect the pounder. Are there extra ports on the hydraulics for this? Thanks.
    Don from Park Ridge wrote on Wednesday, March 06, 2002 (PST):
  • I own a 300 utility tractor and was wondering if anyone knows about the adding of a P T O-----at present there is a plate on the back of the rear housing. Also was this an option on these tractors, or did someone possibly take it off because of problems ? Thanks in advance for any information pertaining to these questions.
    Steve in Georgia wrote on Tuesday, February 26, 2002 (PST):
  • I have a I-240 Utility. I really want to find a service manual and a good place to find parts if thats possible. I am putting a water pump on it . I did find one at NAPA but it was a spicial order. I need some seals for the rear diff and a front main seal and oil pan gasket.(so far) The old tractor runs like a champ though. Contact me for any info you might have. Thanks.
    Dave in Virginia wrote on Friday, February 08, 2002 (PST):
  • I inherited a 300 Utility International and am in the process of fixing it up. Can anyone tell me where I might find parts in Virginia? Or close by? I'm particularily looking for the grill cover assembly.
    Todd Eller wrote on Wednesday, February 06, 2002 (PST):
  • Need history information on 300 utility... How many wore made? What years produced?
    j.d. brewer wrote on Friday, February 01, 2002 (PST):
  • i just got a tractor like that and could not find what kind it is
    Karen wrote on Wednesday, November 07, 2001 (PST):
  • My dad has a 1954 Super H 30 Manure loader for sale. Anyone know where I can list it? Thanks
    rich wrote on Wednesday, November 07, 2001 (PST):
  • have a ih 350 diesel and would like to find parts for it. sheetmetal,decal kit,paint any help would do thank you
    ANDY GOWEN wrote on Wednesday, October 17, 2001 (PDT):
    Frank wrote on Monday, September 24, 2001 (PDT):
  • Anyone know where I can get a hydraulic pump rebuild kit for a 330 Utility?
    Dan wrote on Wednesday, September 19, 2001 (PDT):
  • I recently purchased an international 300U and am pleased with this tractor. I would like to find information on HP ratings and year model according to serial #'s. I am interested in finding a front end loader and possibly a backhoe attachment. Any information on parts or specifications will be appreciated.
    Frank wrote on Monday, September 17, 2001 (PDT):
  • I just purchased A 57 IH 350/Industrial tractor It has c175 gas engine,A Roy Wain backhoe. My problem is the wiring on it has seen better days and it needs to be replaced.I do not know where i can get a wiring manual for it. Anybody know where I can pick one up. it would be much appreciated. thanks
    Roger wrote on Saturday, September 15, 2001 (PDT):
  • I looked at a IH 330 today. No implements. Has PTO and Hydraulics. 1800 hours on gauge. Asking price is $2200. It seems reasonably priced. I've noticed several people mention 330 "Utility". This one does not have "Utility" on it anywhere that I can see. Are these tractors easy to buy implements for, what are the main problems most of them have. Is there a source for an owners manual? Thanks
    John wrote on Monday, September 10, 2001 (PDT):
  • I have a I H 350 diesel utility with a continental engine that needs all new push rods ,for a start anyway.The head has not been removed yet,cause the head gasket source has not been found.Am looking for engine parts!Please help. It has a front loader in good shape,came off a 300 I think.
    Frank L wrote on Monday, September 03, 2001 (PDT):
  • We are looking at a 1959 IH 460 Utility,no attachments. They are asking $4,200, is this a fair price?
    Todd A wrote on Saturday, August 18, 2001 (PDT):
  • Does anyone know where I could find a power steering unit for a 350 utility also need a steering wheel any help would be GREAT!
    Ken Roddy wrote on Thursday, August 16, 2001 (PDT):
  • I have been trying to properly ID my tractor. Most of the numbers are missing. It looks alot like the picture of this 300 utility tractor. some of the parts have these numbers on them 360486R5, 360553R3, 358046R2. One plate I did find has the number 14818P on it. The tractor has a front loader and a backhoe on it. Does anyone know for sure what this tractor is?. Thanks Ken
    Ken Roddy wrote on Tuesday, August 14, 2001 (PDT):
  • I purchased a yellow tractor w/frontloader and backhoe attachment a couple of years ago. It is an International. Recently one of the "teeth" inside the steering box broke off. I checked it out and noted it had been welded in the past. Is there a source for this item to buy a replacement or should I have it welded again. My tractor is also missing both engine sheilds/covers....wher can I find those? Any help will be apriciated. Ken
    Mark wrote on Friday, August 10, 2001 (PDT):
  • Well, just pulled home a 300 LP powered. Engine stuck, but no water in the oil. Been out in a pasture. Don't know yet what I am going to do with it, but for $45.00!! Have lots of possibilities.
    emil smith wrote on Wednesday, August 01, 2001 (PDT):
  • restoring int 300U ser.#22436 would like to know year of manuf. also if someone has a color picture of how it is supposed to be painted ,will return picture and postage and thanks.
    Patrick Rawls wrote on Saturday, July 21, 2001 (PDT):
  • I have recently purchased an old IH tractor. It has no sheet metal or serial number plate, a wide seat,a wide front, and used to be yellow . It appears to be an older model of the 300 utility shown above. Does anyone know if such a beast exists? Any pictures? Looking for help!! Thanks!!!
    Glenn Kingdon wrote on Wednesday, July 04, 2001 (PDT):
  • I have an IH 300 Utility, I need the rear plate on the clutch (it drives the PTO). Does anyone know if a clutch from a 350 fit?
    TOM MENDES wrote on Monday, June 25, 2001 (PDT):
    Bryan wrote on Wednesday, June 20, 2001 (PDT):
  • I am looking to buy a 350, Has a Front loader, Frontmount Hydraulics, 2000 hours, good rubber on back 28's... the Frontloader has alot of welding and is cracked in a few places, they are asking $3500 is this a god price?
    A. LaFargue wrote on Friday, June 08, 2001 (PDT):
  • I have an IH 300 utility tractor in fairly decent shape, paid $2600, but steering is loose. Any help on how to take out play. Already tried all steering adjusting screws. Also wanted to know how many made and serial numbers of years in production. Thanks
    gary wrote on Monday, June 04, 2001 (PDT):
  • I'm looking for an exhaust pipe, from the manifold pipe down to the muffler on a 300 utility, anyone help with this ??
    gary wrote on Monday, June 04, 2001 (PDT):
  • I'm looking for an exhaust pipe, from the manifold pipe down to the muffler on a 300 utility, anyone help with this ??
    Duane Fleming wrote on Thursday, May 31, 2001 (PDT):
  • Trying to find a loader for a International 300 utility, What size or model? I am not particular to the manufacturer if any one knows of an after market brand.
    Brad Kocka wrote on Wednesday, May 23, 2001 (PDT):
  • I am looking for a set of front wheel assy's for a 300 Hi-crop. 20" If anyone knows where to find a set please let me know
    Daryl Pohlman wrote on Monday, May 21, 2001 (PDT):
  • I have a 1959 350 Utility with manuals, and some attachments (shreader, blade, plow). They will be going up for auction on June 23, 2001. Tractor ran the last time it was parked in the shed (about 5 years ago). Needs some work, but a good project for someone. Contact me if you have any idea of worth or interested in purchase. Thanks.
    David wrote on Wednesday, April 18, 2001 (PDT):
  • I think that I may know the answer to my eairleier question as to what the D and S was for on my hydraulic control valve is for. single acting or double acting cyclinder-
    David P wrote on Tuesday, April 17, 2001 (PDT):
  • I own a 300 utilty. Paid $750 good shape. It does not have TA. I also have a 300 farmall I paid $1,600.It has TA.Good shape. I know that my 300's are 1954's. I know alot about these tractors. So fell free to E-mail me. I will buy any Interanial tractor.
    David wrote on Monday, April 16, 2001 (PDT):
  • I have a IH 300 Utility With two hydraulic contol valves. On the end caps ther is the letter "D" and "S" stamped and a pin that will rotate from one to the other. Does this change the valve from detent to spring return or what? Also what is the HP for this tractor with TA.
    Dave wrote on Friday, March 30, 2001 (PST):
  • looking for a I.H. 240 or something close to it with wide front end and a live p.t.o. I don't know what ones had a live p.t.o.
    Ernie wrote on Sunday, March 25, 2001 (PST):
  • I have an IH 350 utility,I am looking for original two point, fast hitch implements, two or three bottom plow, disc, etc. I already have a sicle mower. The closer to Montana the better. Thanx.
    Will Cousins wrote on Wednesday, December 13, 2000 (PST):
  • I have the opportunity to purchase an IH 300 Utility for $2500. It has great "original paint", good rubber and the engine has recently been overhauled. New pump and a 12 volt system. Comes with snow blade and brush hog. Is this a descent deal...??
    Art Waterman wrote on Friday, December 08, 2000 (PST):
  • I'm looking for a reasonably priced shop manual for 1966 300 Utility to use as reference for a restoration project. Any help would be greatly appreciated.
    rollin king wrote on Saturday, December 02, 2000 (PST):
  • i have a 300 and i would like to know were to find parts for it things like the letters and maybe a sleve kit . i would like to fix it up as close to new as i can
    matt wrote on Friday, December 01, 2000 (PST):
  • We have a International 330 on are 90 acre farm. We have used it for years farming and finally this year we restored it. But it is still used almost every day on are farm
    Joel wrote on Monday, November 27, 2000 (PST):
  • I am looking at purchasing a 300 Utility as my first tractor. It has a front end loader, but no PTO and the tires are worn. Otherwise the tractor seems to be in good condition. Can anyone provide me with a fair price for this tractor? Thanks in advance.
    simon wrote on Sunday, November 19, 2000 (PST):
  • i have just gotton what i belive to be a 300 utility with a loader backhoe on it it theres no hood but the gauges say ih acn anyone help me find what model this is or where to look for the number also the loader backhoe was made in widsor vermont any info would help
    Anthony wrote on Tuesday, November 07, 2000 (PST):
  • I have a 300 utility and I just rebuilt the starter, but I don't know what combination the wires go on their are 4 wires one Blue, one Yellow,and two red one is more pink than red. the Blue one has a eyehole that will only fit on stud on the starter but I can't get the starter to work, well it does but as soon as I connect the wires it tries to start even if it's turned off with no key in. I don't know much about tractors any help would be appreciatied thanks
    Bob wrote on Tuesday, November 07, 2000 (PST):
  • Can anyone tell me the horsepower of a 300 with "torque Amplifier"? One other thing, it seems as though the inner sides of the front tires rub against the axle. What causes this, wrong tires or what?
    Shannon Allen wrote on Thursday, November 02, 2000 (PST):
  • Can anyone help me? Im trying to find exactly what model tractor I have. I know its a Farmall International Harvester (maybe 300-350) serial #25207 SJ. Is there someone I can call who has a list of serial numbers. Thanks
    Shannon Allen wrote on Thursday, November 02, 2000 (PST):
  • Can anyone help me? Im trying to find exactly what model tractor I have. I know its a Farmall International Harvester (maybe 300-350) serial #25207 SJ. Is there someone I can call who has a list of serial numbers. Thanks
    Ron Duttweiler wrote on Friday, October 27, 2000 (PDT):
  • I have a 300u with a loader and I am very pleased, but I need parts for the manual steering. I noticed another person who was looking, does anyone know where to get parts, new or used?
    Richard wrote on Wednesday, October 25, 2000 (PDT):
  • I reciently purchased a international utility ser.No.1152 the tractor has a 4 cylinder gas engin front loader.someone has removed the emblims so I don`t know if it is a 300 or a 350 can anyone help.
    Mike Pie wrote on Thursday, October 19, 2000 (PDT):
  • I own a 1955 300 in great shape. The power steering unit needs to be rebuilt. Any spares out there?
    dale nelson wrote on Wednesday, October 18, 2000 (PDT):
  • I,m looking for a gas tank for farmall 300 in good condition thank you....
    Fred Palmer wrote on Monday, October 16, 2000 (PDT):
  • Jesse Hughes, I bought a 300 U with a Torque Amplifier in june and it has power steering.
    Jesse Hughes wrote on Thursday, October 12, 2000 (PDT):
  • My father owns a 300 utility that is in pretty good condition. We might be restoring it. I myself am looking into another one that is sitting in some weeds for $400. I need to know if the 300 utility with the Torque Amplifier had power steering or not. I cannot tell with this tractor.
    Bob Frawley wrote on Wednesday, October 11, 2000 (PDT):
  • I'm looking for an International 300 Utility model toy tractor of any scale. I drove one on our family farm, and would like to get a model for a keepsake. Would appreciate any help. Thanks.
    Gary Dreyer wrote on Sunday, October 08, 2000 (PDT):
  • my IH looks like this,but I'm not sure. SN # 377237-R1 I'm not sure what model I have
    Duane wrote on Monday, October 02, 2000 (PDT):
  • I am looking for a loader to fit my 504 Diesel row crop with a wide front end. Does anyone know what a 504 Diesel tractor is worth these days? It has a four cylinder diesel engine with about 45 horsepower, three point hitch with a T.A. Any comments are appreciated.
    David Payne wrote on Sunday, October 01, 2000 (PDT):
  • Last week I purchased an International,utility? transverse front spring, dual rear 24" wheels and a Hough scraper and bucket. Runs but needs carb work, engine strong. Any information or comments appreciated on what I have. Thanks, Dave
    R. Preston Sutherland wrote on Monday, September 25, 2000 (PDT):
  • I recently acquired a 300 utility, it runs fine, but the power steering doesn't work at all, we have bled the lines, and still nothing....all the other hydraulics work. Any help would be appreciated.
    Mike Reynolds wrote on Monday, September 25, 2000 (PDT):
  • I have a 59' farmall 340 rowcrop with wide front and superior loader, great little tractor but I never see any other 340 rowcrops. Does anyone know how many were built and sites that might have some more info on these?
    Glenn Chaney wrote on Tuesday, September 19, 2000 (PDT):
  • I have a '55 300 Utility, I need a PTO Shield,Mesh behind the grille,Tool Box, Battery Box, and the IH emblem on the front. Any help would be greatly appreciated, Thanks
    Robert Vale, Moncton NB Canada wrote on Friday, September 08, 2000 (PDT):
  • I have an International 300 Utility which needs the casting that holds the three point hitch assembly to the tractor. It bolts on behind the seat. Can anybody help me source this? Rest of tractor is in great shape.
    Daniel Dickerson wrote on Tuesday, September 05, 2000 (PDT):
  • I bought a 1958 International 460 Utility a few months ago for $3,500 - I love it... the paint job is a little rough, but the lift is strong, and the engine is in great shape! The tires are a bit worn but are doing fine - This is a GREAT TRACTOR!!!!
    Bruce McIntosh wrote on Saturday, September 02, 2000 (PDT):
  • Re; 1955 International 300 Utility Tractor My father and I have partly restored this model of tractor. We found it on the side of the road and brought it home. We have rebuilt the motor with pistons, rings, and seal kits. We still have a ways to go to finish. We find that the steering is loose and the hydraulics have a grinding noise but still work. I plan to finish the rest of the repairs to make everything operational and then paint it. I still need some quick hitch parts, and a front grill in good shape if anyone has any comments or suggestions I would appreciate hearing them. Bruce McIntosh
    joe sershen wrote on Sunday, August 27, 2000 (PDT):
  • looking for a front loader that will fit a 450 wide front end farmall and 12 volt wiring diagram with a altenator
    Matt wrote on Thursday, August 24, 2000 (PDT):
  • I have the oppertunity to purchase an Int. 350U with loader and Backhoe. Starts right up, hydraulics work, tires pretty worn, no muffler, paint beyond shot (repainted once and peeling off in sheets) They are asking $2900. Is this reasonable? I just want something inexpensive to dig and pull stumps etc... plan on putting up a pole barn soon so I want something soon.
    CARY KOEL wrote on Thursday, August 24, 2000 (PDT):
    DON NESS wrote on Wednesday, August 16, 2000 (PDT):
  • I have an Int. 340 utility gas that needs a tachometer cable. Also need the brackets that mount on the rear axle that the stabilizer arms for the 3 pt. hitch lift arms attach to. Any help greatly appreciated.
    Ken Warnock wrote on Sunday, August 13, 2000 (PDT):
  • I've got a IH 300U and am considering adding a front loader to it. Does anyone have any knowledge of a source for a suitable loader that will fit this tractor? Also what is the horsepower rating of the 169 cu. in. IH engine? Thanks,
    Art Melin wrote on Friday, August 11, 2000 (PDT):
  • I own a 350 Wheatland special and use it all summer long. I runs great.I would like to find a decal kit so I could give the old girl a paint job. Any help would be great. Thank you
    Marge Barbosa wrote on Tuesday, August 01, 2000 (PDT):
  • We recently bought a 330 utility and are having it restored. It is absolutely great looking, but we are looking for the number 330 for both sides. Can anyone help us out?
    Burt wrote on Sunday, July 23, 2000 (PDT):
  • I have one of those that need to be verified. I cant get it to start ... neither to brake (last time i used it), and im no good at mechanics. Where can i get my international fixed in Quebec Canada ? It is in very good condition. The hydraulics have just been rebuilt to new.
    Pat Parker wrote on Thursday, July 06, 2000 (PDT):
  • I own a 330 Utility with a backhoe and front end loader. However when you take the hoe off of it the steering gives a new meaning to armstrong steering. Is there some kind of power assist available for these wonderful little tractors. Any help would be appreciated.
    Michael Clary wrote on Saturday, July 01, 2000 (PDT):
  • Have the oppotunity to purchase a IH 340 utility tractor, fast hitch, front end loader, 1031.3 hrs, looks to be in decent shape just looks "well used". What would be a good bargaining price to pay for the tractor. Please email to docpenny at Thanks, Mike
    KEN SHEREN wrote on Friday, June 30, 2000 (PDT):
  • I have been told I have a Int. 300 LPG Grove tractor.I found it in a salvage row at a auction a number of years ago .With all the grove sheetmetal on it, from the front it looks like a big bug,if there were some big eyes painted on it.It is pretty rough,but it would not run any better if it was new.I was told that there was a couple of independent companies that produced the sheet metal for these grove tractors.Also no ID. plate available.Steering gear is under steering wheel (sort of,steering shaft extended because of LPG conversion). This would be a real conversation piece when done .Any info appriciated.
    David Dowling wrote on Tuesday, June 27, 2000 (PDT):
  • I have operated a 300 utility tractor most of my life and I would never part with it. I am in the process of looking for another one to buy in the midwest. Any info on a good one, running or not, would greatly be appreciated!
    Mark wrote on Monday, June 26, 2000 (PDT):
  • I purchased a IH 300U for $2100. I can't find an electrical schematic for it and the IT manual doesn't have one. Can anyone give me a hand. Also would like to convert my manual steering to power as I am going to add a loader once it is restored. Anyone done this before? Any help would be greatly appreciated!
    Michael B. wrote on Sunday, June 25, 2000 (PDT):
  • I am looking at a 300 utility w/ loader. It does not have a PTO. Does anyone have experience with adding PTO? Are parts available? Also-are these known for steering problems? Thanks
    Rod wrote on Saturday, June 17, 2000 (PDT):
  • does anyone know if the engin from an H will fit on a 300 utility any help will be appriciated
    Jim Trist wrote on Tuesday, June 13, 2000 (PDT):
  • I have a chance to get an Int. 300 for $2,400 but I have to hall it from Alabama to Michigan. It comes with a parts tractor, man. stearing, no T.A., back tires are good, front tires are car tires, runs good, no leaks, just had the head re worked. Is this a good deal or not? Any comments are appriciated.
    Rick Paris wrote on Saturday, June 10, 2000 (PDT):
  • I just purchased a 460 Utility Serial # 8059 P-Z. It is missing the air filter. Does anyone know where I can get one? Also does any one know what year it is? Thanks for any help I can get. Rick
    William Smith wrote on Monday, May 29, 2000 (PDT):
  • I Have a 340 utility with tourque multipier found a clutch for that. Does any body know what the shaft sticking out the side of the pto gearbox on back of tractor is and is there supposed to be a lever or something on it.
    Jim Borden wrote on Wednesday, May 24, 2000 (PDT):
  • John Your tractor is most likley an International 350 Utility. International built the 300,330 and 350 in the mid to late 50's. Very simuler to the Farmall 300 ect. the steering is the change you see.
    John Nolen wrote on Monday, May 22, 2000 (PDT):
  • I just bought what I thought was a 350 Farmall with LP gas but the manual shows a tractor with the steering gear up front. Mine has the steering gear under the steering wheel. It looks like the 300 in the above picture. Any tips on how to find out what this tractor is?
    Doug Graham wrote on Thursday, May 18, 2000 (PDT):
  • I am looking at a International 340 Utility ser. 8686. It is fair but the Hyd. doesn`t work, it is also gas. I need to know what year and what is a round figure for this tractor.
    stan.p wrote on Sunday, May 14, 2000 (PDT):
  • have a 340 utility tractor gas engine frontloader. asking $4000 has good rubber allaround newrear axles seals new water pump. hood and grill has new paint change hitrans fluid in backin transmission steering. tractor run great ready to work
    john puntonio wrote on Tuesday, May 09, 2000 (PDT):
  • just bought a IH 300 with loader. need to find information on how to get parts. this is my first tractor and i am very green in this area. live in mass.
    Reed Nichols wrote on Sunday, May 07, 2000 (PDT):
  • According to one source that I found, there were approximately 600 IH 350 HU tractors made. Haven't been able to get any more information than that. This man said they were a rare tractor and he deals in antique and classics.
    Carl Chapin wrote on Saturday, May 06, 2000 (PDT):
  • I have a 1957 IH 350 high utility. Serial # 1565 H.U. It has 38 in. rear tires. Does anyone know how many of these were built?
    HOWARD ROOKER wrote on Saturday, April 22, 2000 (PDT):
    Reed Nichols wrote on Sunday, April 16, 2000 (PDT):
  • What was an International 350 High Utility Serial#18089HU designed for? Can't find any specifics, resembles regular utility but has 38" cast wheels on rear, long spindles on front. Has PS, TA and FH.
    john wrote on Tuesday, April 11, 2000 (PDT):
  • we own a 300 utility, probably a '58. Great machine, but having trouble with a leaking hydraulic tank under the seat and a slow reaction time with the hydraulics, especially if it's cold. The leak happens after the tractor has been parked and allowed to cool. Any ideas?
    Dale Dunkelberger wrote on Monday, April 10, 2000 (PDT):
  • A friend has a 3oo row crop with wfe its in great shape with the 3 point hitch conv. it comes with a 5 ft brush hog all the tractor needs is paint, sheet metal is great he only used it to brush hog 1.1/2 acres of grass once a year . does any body know what this tractor might be worth . Iam thinking of buying it . If so let me know , Thank you
    Gary Gilbert wrote on Saturday, March 25, 2000 (PST):
  • I own a 52/58 International 350 Utility with clorided rear rubber, and the rims are beginning to show signs of rust. I would like to find both rear wheel weights as well as front weights, either wheel, or frame mounting, to fit my tractor.
    Bobby M wrote on Wednesday, March 22, 2000 (PST):
  • I own a IH 300 utility not sure about year and how to find out what year, having carberator problems sure could use some advise or a place to get information or shop manual any help would be appreciated.
    Mark Bewick wrote on Wednesday, March 22, 2000 (PST):
  • I own a Farmall 300 with out Hyd. is That rare or a farmer fix. I also own a 3 furrow plow with rubber tires what is the age of it?
    Mark Bewick wrote on Wednesday, March 22, 2000 (PST):
  • They are the Best !!!!
    John Cretens wrote on Tuesday, February 22, 2000 (PST):
  • I'm looking for a replacement steering gear assembly for my Dad's '55 300 utility tractor. I've had no luck finding one in the Michigan/Wisconsin area. ANy suggestions?
    Gary Gilbert wrote on Friday, February 04, 2000 (PST):
  • I own a 54/57 International 350 Utility with gas engine. This is a very good little tractor and the rear tires are chlorided which isa beginning to cause some rust on the rims. I want to find both rear wheel weights for this tractor and would appreciate info regarding this matter. Also, i would like to find the front weights that bolted to the front frame
    Dennis M. McCarthy wrote on Friday, January 28, 2000 (PST):
  • To Jim Anderson, I just completed restoring a 240 Utility with a loader. Contact me if interested.
    Bill wrote on Thursday, January 27, 2000 (PST):
  • My mother-in-law gave me a '55 IH 300 Utility with instructions to make it run and look good again. Still early in the restoration (tearing it apart) process. Been trying to find websites with good assortment of parts for the 300 U's, but parts seem few and far between. Anybody know good websites or part sources?
    Iain Paton wrote on Friday, January 21, 2000 (PST):
  • I've been searching for info on my IH 276 but there is just no records anywhere of this model even existing. Can anyone help as i need to know some specs so that i can sellit/get parts for it.
    Brandon Jones wrote on Monday, January 17, 2000 (PST):
  • I have a 300 model farmall and the serial number is worn away and I was wandering if there was and other way of telling the year model
    Brandon Jones wrote on Monday, January 17, 2000 (PST):
  • I own a 300 Farmall, and all of the 300 model tractors that I have seen had a TA and my tractor does not and I was wandering if it is unusual to see a 300 without a TA?
    John Uthoff wrote on Tuesday, January 04, 2000 (PST):
  • I have a 340 utility and I need basicly the whole 2pt assembly for the back, would anyone have any idea on where I can get one?
    matt wrote on Friday, December 31, 1999 (PST):
  • We own a 57 330 utility IH that I use on a daily basis.We bought the tractor at an auction for $2000,with snow plow,3furrow plow, sickle mower,cultivator and front end loader.So far we are working 6 acres on our 37 acre farm. My problem is I would like to change the 6 volt system to a 12 volt. I've been told I could put a delco alternator on with a built in regulator but I am worried about the 6 volt starter. Will It get damaged? Should I change anything else?
    D Dodd wrote on Thursday, December 30, 1999 (PST):
  • I own a 444 IH utility with loader. I am starting to restore and would like to know if this is at all rare. I would take off the loader and only work it in parades if I had to.
    Brad wrote on Thursday, December 23, 1999 (PST):
  • Looking for a 300, 340, 350 or something similar with a bucket and backhoe. I'm in Texas and would like to find one around here, but would travel for the right tractor. Thanks.
    Jim Anderson wrote on Wednesday, December 15, 1999 (PST):
  • Looking for 240 Utility.Will pay top price.
    frank wrote on Saturday, November 27, 1999 (PST):
  • I own int. 300 or so i think it is,it has a backhoe&front end loader.I used it all year to dig and clear land great machine,burns oil would like to replace the rings but need a book on the specs also i think it has a wager backhoe? any help would be great.
    Denny wrote on Friday, November 26, 1999 (PST):
  • I picked up a 300 farmall yesterday for $3,100 with two buckets and a back plow it is in good shape it has a small hole in the radiator ware the steering rod hits it thay were built from 1954 to 1956.
    Jim Egan wrote on Sunday, November 07, 1999 (PST):
  • Is $6,000 a fair price for a IHC460 Utility with loader/snow bucket, fast hitch blade, rotary blade, post hole digger, drag drain drill?I haven't seen this yet so don't know what kind of shape it is in?Thanks, Jim Egan.
    Ross Burke wrote on Saturday, October 30, 1999 (PDT):
  • My neighbor just bought a 230 and thinks it could be rare. It has a two point hitch on it. Does anyone have any info.
    Bill Drinane wrote on Wednesday, October 13, 1999 (PDT):
  • I own a 1959 IH model 340 utility. I'm looking for the cable that connects the tach to the drive on the distributor.
    Mr Gadget wrote on Monday, September 27, 1999 (PDT):
  • Just purchased a 350 Utility, with front-end loader (front drive pump), all tin is there, pretty straight, too. It has a standard "quick-tach" (or whachacallit) with an optional setup to convert to 3-point. Found it in the weeds behind a guy's quonset. Hadn't been run for a couple years. Drained the old gas, added fresh, check the fluids, pull started it. It ran a few seconds and quit. Couldn't get it goin' again, but bought it anyway. Is $1200 too much?
    M. Denny wrote on Friday, August 13, 1999 (PDT):
  • So far we love our 1958 IH 350 Utility Tractor w/loader & back hoe. I have tried to find info on the back hoe but not much luck so far and luckily we haven't needed any parts yet. The engine runs great. It seems that there just isn't much info out there on this paticular model especially Gas.
    wayne moore wrote on Thursday, August 12, 1999 (PDT):
    Rick wrote on Thursday, August 12, 1999 (PDT):
  • I purchased a 300 utility about 2 weeks ago for 200 bucks. The 169ci engine had a stuck exhaust valve. After pulling the head repairing the valve problem and replacing a push rod I am grinning from ear to ear. Installed a flapper on the exhaust to keep the rain out of the engine which was the cause for the valve problem. The coffee can aperiently had not been on the exhaust the whole time it had rested. Now all I need is the LINK on the left hand side of the 3 point hitch that attaches the lift arm to torsion bar. Seems that this link must have been broken at some time in its life and has a make shift affair in place of it. Any help locating this piece or what this piece is called due to the fact that I know nothing about tractors would be greatly appreciated. THANX
    Greg Neymeyer wrote on Saturday, August 07, 1999 (PDT):
  • To Steve C., I'm no expert but that seems a little high. Unless it just came off the showroom floor and the loader was never used I wouldn't pay that much for it. I own a 56 model with a loader on it and if I could get 3500 I'd be very happy. And to Tim, the best I've come up with is the 300's were made in 55&56 but I don't remember the prod. no.s.
    Tim wrote on Saturday, August 07, 1999 (PDT):
  • I'm in the process of restoring a 300 Utility basket case. No problem finding parts, but no one seems to be able to tell me what years these tractors were made, or how many. Anyone out there know?
    Jim wrote on Friday, August 06, 1999 (PDT):
  • i bought amodel 340 with a loader and looking afor a radiator and steering wheel as well as pto hookup. thanks to all who can help
    M. Deny wrote on Monday, August 02, 1999 (PDT):
  • We just bought and International 350, gas with front end loader and a back hoe. We are trying to find out more information about it. We need to replace one of the hydrolic hoses on the back hoe and it doesn't appear that you can get to it with out dismanteling the arm. Can anyone help?
    Steve C wrote on Wednesday, July 28, 1999 (PDT):
  • I have the opportunity to pick up a model 300 for $5000 which includes a loader. It seems to be in decent shape with low hours. Is this a fair price ?
    Toby wrote on Tuesday, July 27, 1999 (PDT):
  • I own a 1958 International 350 Utility and it has the GD193 contential diesel engine in it.Any info would be great.
    DENNIS HOOPER wrote on Monday, April 12, 1999 (PDT):

    Use This Form to Add Your Own Comments or Questions


    [Return to the Shed]

    Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F).  Expedited shipping available, just call!  Most prices for parts and manuals are below our competitors.  Compare our super low shipping rates!  We've kept the same low rate for six years.  We are a Company you can trust and have generous return policies!   Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

    Home | Forums

    Copyright © 1997-2024 Yesterday's Tractor Co.

    All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.

    TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within these website pages are the property of their respective trademark holders. None of these trademark holders are affiliated with, our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.