Antique Massey Harris Tractor - Massey-Harris Pony

Parts for Old Tractors
Click Here or call 800-853-2651

TRACTOR PARTS	TRACTOR MANUALS

Antique Massey Harris Tractor: Massey-Harris Pony
[Return to the Shed]

The Pony was built between 1948 and 1957. It had a little Continental 4-cylinder engine rated at 1800 RPM and was capable of 10 HP on the drawbar. It was built only as a standard-tread model and was sold at the time for about $900.00 - additional optiosn were available such as a belt pulley, PTO and a hand-lift for implements.
Massey-Harris Pony Tractor

Do you have any comments or questions about this tractor? Ever use one? Know anyone who owned one? If so, please join in on the discussion below. Use the form for entering your comments.

Comments on this Tractor

Piet wrote on Tuesday, November 12, 2013 (PST):

Looking for Marvel-Schebler carburettor for Pony in South Africa. PC illiterate, don t know how to find e-mail address.

Lee wrote on Tuesday, October 15, 2013 (PDT):

I have a brand new Marvel-Schebler Universal Carbureter Model TSV-54U for sale. E-mail me if you still need one in S.Africa.

John McClain wrote on Thursday, September 05, 2013 (PDT):

I think the Ferguson Pony was manufactured for a short time in the transition from Massey Harris to Massey Ferguson...I have a friend that has a Massey Harris Ferguson tractor also and I think they are rather rare! I have a Pony but don t know what year it is..I need to either rebuild or get a new steering gearbox for it.

josh galland wrote on Thursday, August 29, 2013 (PDT):

i have 1953 massey pony i just got.The tag says MASSEY HARISS FERGUSON LIMITED PGA22538.While in the proscees of sandblasting i saw old grey paint under the red someone painted years ago.i was told it was supposed to be gray.Is there anyone who no s if this is true.THANKS

Steve wrote on Monday, July 22, 2013 (PDT):

I ve been fortunate enough to care for my friends ranch, over the past year or so as the family deals with the trials of life. My friend, who had to leave our province to secure work, asked me if I could look at their old tractor and perhaps get it running again. The tractor had been parked for nearly thirty years. I agreed, turns out it s a pony, with #40 mower. I tried the engine with the hand crank and it turned freely. I removed the engine cowling and blew out the top of the engine. Removed the plugs, lubricated the cylinders.. Added fuel, one of my tractor batteries, and hotwired the ignition. key was broken off inside the lock she sputtered, fired and ate my battery for breakfast. low charge Charged the battery and returned the following day. She didn t sputter.. didn t fart.. just plain fired right up and purred like a kitten..er.. pony. This prompted me to try the side mower......prompted me to research the side mower.. prompted me to use my brain to figure out that it had been re-connected simply for storage and use.. The tractor is missing some sheet metal sidecovers and battery cover aside from that what an amazing machine.. it drinks gasoline like a survival nut drinks water in the desert. very sparingly I have used all the gears and the pto, today I plan to return to the ranch and re-mount the mower. Lower field is getting really tall and I am in love with the thought of mowing that field. health issues prevented sr. from properly working the ranch Just thought I would add my story so far, to those already here. THANK YOU MH for giving my life yet another amazing experience. post script; I am purchasing this tractor from the family, so that it may remain, on the ranch where it belongs.. back in service, albeit light duty.

Jim Lane wrote on Wednesday, August 08, 2012 (PDT):

I have a oil bath air filter and intake tube for the model G Alis chalmers and I believe it will fit the MH Poney. Like the Poney and the AC MOdel G My Earthmaster has the Continental 62 N engine in it but the oil bath breather would not fit my Earthmaster. I ll give you a good deal. I also have a AC model G clutch pressure plate. It would not fit my EM either.

IRVIN OTTE wrote on Tuesday, August 07, 2012 (PDT):

We have a Massey Harris Pony,Ser.#POA1876. We would like to know what year model of Pony it is. We also need to find an air intake cleaner assmbly and tube. HELP,PLEASE!

Chuck in Wi. wrote on Saturday, June 30, 2012 (PDT):

1948 pony parts tractor. Metal parts all there,some motor parts, etc.

Larry Paisley wrote on Tuesday, June 12, 2012 (PDT):

I Have a 1948 M-H Pony Tractor, S/N; PGS 1455. It is complete and running. There is a #801 Plow Assembly, a #40 disc Harrow, a #40 Field Mower w/5 ft. Bar, a PTO pulley attachment, a draw bar and other miscellaneous parts. its condition is GOOD. Am asking 1,500.00. Phone; 916/687-6854, Sacramento, Ca.

forest wrote on Saturday, March 31, 2012 (PDT):

i have a 1953 pony for sale.

Jerry Smith wrote on Tuesday, March 27, 2012 (PDT):

Have 1949 Pony. Need oil filler cap, gearshift rod and knob, also ignition switch with key.

Kevin Standifer wrote on Sunday, March 18, 2012 (PDT):

Does anyone know where I can get the sheetmetal part that goes over the battery, I have the side covers and can not find the battery cover. Thanks

Gabriel R Kowalski Oxford Mich 48371 wrote on Wednesday, February 29, 2012 (PST):

Please delete my ad on the Pony Tractor Massey Harris 1952 Everything tractor and all is sold . Thanks for this forum,

Ralph Kuester wrote on Saturday, January 07, 2012 (PST):

have 1949 MH Pony. looking for cutter bar, cultivators and 14 plow plus manuals. Any out there

jeff smith wrote on Monday, November 14, 2011 (PST):

We have a Massey Harris Pony almost complete except for a carb and the side covers for the battery....It has the Hydraulic lift all still working etc.... Want to know if there is a way to mount a small box scrape to the lift...its not a 3 point hitch though ...any help pics and or info wld be greatly appreciated

Gabriel wrote on Wednesday, August 31, 2011 (PDT):

For sale 1952 Massey Harris Pony Tractor ,s/n PGA14246, plow ,Have Clutch plate for massey harris for sale, 516068M93 11in 10 spline , 248/628/0336

keith george wrote on Sunday, June 19, 2011 (PDT):

I AM LOOKING FOR MASSEY HARRIS PONY THAT IS SOMEWHAT RUNNING CONDITION WITH ATTACHMENTS, IE CULTIVATOR,PLOW,HARROWS,DISK THANKS. 602-292-4157

Donnie Carpenter wrote on Tuesday, April 26, 2011 (PDT):

Friend in church needs carburetor for 52 year model as soon as possible Thanks

DAN MOODY wrote on Tuesday, March 15, 2011 (PDT):

I was given a 1952 pony and would like to rebuild the motor not sure were to start looking for motor parts like crank bearings valve ect. Can any one help point me in the right direction

Ricard Smith wrote on Saturday, March 12, 2011 (PST):

I am in need of a manual or detailed picture for a pony cultivator with hand lift. I think I have all the parts but cant figure out the assembly Thanks.

Fred Chandler wrote on Wednesday, February 23, 2011 (PST):

I have a 1951 Pony. Need to know the correct paint numbers and brand name for the red and yellow on the tractor.

Rudy LeBlanc wrote on Thursday, January 27, 2011 (PST):

I own a Massey Harris Pony 1954 I think, I d like to know if there s another way to set-up a power take-off rather than the original attachment.

John Lewis wrote on Tuesday, December 28, 2010 (PST):

I have a 1950 massey harris pony tractor with a disk and plough. Can tell me or send a picture on how to mount the plough

Gerrit Coetzee, South Africa wrote on Saturday, December 11, 2010 (PST):

I have an old Pony with PTO, plough and plough operating levers; weights on all wheels, etc.. Value

mike koralia wrote on Sunday, October 03, 2010 (PDT):

have a 1947 pony 4 attachments run looks good 3000 live duluth in duluth minn 218 591-9349

mike koralia wrote on Sunday, October 03, 2010 (PDT):

have a 1947 pony 4 attachments run looks good 3000

gary bingaman wrote on Thursday, September 16, 2010 (PDT):

do not have would like to buy one that needs little work

John J Law wrote on Monday, August 23, 2010 (PDT):

I am retired and living in Cyprus. My friend has a Massey Harris Pony serial number 2245. Can anyone tell me the year of manufacture and any other history of this machine.

joao jose franēa silva wrote on Monday, July 19, 2010 (PDT):

gostaria de comprar um motor restaurado do massey harris pony n62 A continental

Roger wrote on Wednesday, July 07, 2010 (PDT):

I saw some tractors exhibited at a county fair today. One of them was a MH Pony inside an apparatus called a Massey Harris Mare. It the Mare was a drivable machine with the operator sitting high up on top. There was no one around that I could question. Does anyone know what this type of machine was used for If interested I could forward a picture to your email. Thanks

Scott wrote on Saturday, June 26, 2010 (PDT):

I can t find my serial number; PGA 20006. I would like to know how to read the serial number and the approximate worth of it. where parts can be found.

Murray Saunders wrote on Monday, June 14, 2010 (PDT):

what voltage is the battery on a 1948 Pony Started to rebuild one but not sure of the voltage

Jim Whitehead wrote on Saturday, May 08, 2010 (PDT):

Own a 49 Massey Harris Pony- Is there anyone out there that has a sickle bar mower for this tractor and would care to part with this for a fair price Maybe you might have some other attachments that you are looking to sell off Please contact me at the above e-mail Thanks Again!

Bill Deel wrote on Friday, April 16, 2010 (PDT):

I had one when I was a kid mid 1960s in Missouri. My first transportation.

Mike Mercer wrote on Saturday, April 03, 2010 (PDT):

I am currently restoring a 1954 grey pony that I used as a kid. Would like to know the color of grey, I m noy sure if it was the same grey as the TO and TE20 and 30 s Came someone please help me on this. thanks for the time

jim frey wrote on Thursday, April 01, 2010 (PDT):

I have 2 ponys pga 22340 , pga 22375 same engine n62a

mike croskey wrote on Wednesday, March 10, 2010 (PST):

my son owns a pony and would like to know how to find out what year and worth

WENDELL COLLICUTT wrote on Wednesday, March 10, 2010 (PST):

I HAVE A MASSEY PONY SE#PGA3104A AND WOULD LIKE TO KNOW WHAT YEAR IT IS

Daniel teixeira wrote on Wednesday, March 10, 2010 (PST):

I want to now, if it“s possible, the height in kg, and also the dimension, width and length in cm

Shelby Grimes wrote on Monday, February 22, 2010 (PST):

What is correct Paint color for the MH Pony Tractor and Wheels

Bobby Jones wrote on Sunday, February 14, 2010 (PST):

For Sale 1952 massey Harris Pony with contninal engine. Good to excellent condition.Barnkept for many,many years. Equipted with 52 belly mower,also 48 gravel,snow steelblade comes with it.Low hours,runs very good.Any questions please free to call at this #540-778-3930.Thanks,Bobby. PS,Price- 1,500.00

Fred Franklin wrote on Saturday, January 16, 2010 (PST):

I have a 40 s MH Pony for sale in Eastern NC. It is complete and all body panels are in good condition and brakes even work good but exhaust has been rained in and manifold is rusted out and intake has been rained in and engine won t turn over. Pics are available for a serious buyer... I will take 1000 for it and NO less. It does have the belt/shaft pto on it!

rick rogers wrote on Saturday, January 09, 2010 (PST):

have complete M. H. Pony for sale... unsure of year tractor has belly mount blade...do know that it runs but needs carb rebuilt

Allen Van Boven wrote on Sunday, December 20, 2009 (PST):

I just purchased my first Massey-Harris Pony today. It is a 1948 and the drawbar is just a rod with a loop at the end. Looking for information on if this year tractor had other style drawbars, and if so where I can purchase them. Thanks

Jason Lyon wrote on Monday, December 14, 2009 (PST):

I have a M. H. Pony and I need a front spindle. Does anyone have any ideas for parts

Bill Burbridge wrote on Tuesday, October 27, 2009 (PDT):

Irecently bought a 1952 MH Pony. A plow, disk harrow and a 6 foot sickel mower. I need better instructions on mounting the mower model MH228 . Iam a;so not sure I have all the parts. HELP! If you want to buy the disk harrow or plow I live in Vancouver, WA. email me. I believe the correct color of the tractor is red. Available from CT Country Tractor Ph;888-828-3276. They have a lot of parts and manuals for the Pony.

Bernardo Botero Pulecio wrote on Monday, October 12, 2009 (PDT):

necesito conseguir el catalogo y el motor de arranque

bud wrote on Monday, September 28, 2009 (PDT):

I m trying to find a manual for set-up of a #40 side mount mower. I rec d the mower in pieces trying to assemble mount. can anyone out there help thanks bud massillon,ohio

carl wrote on Sunday, September 20, 2009 (PDT):

I have two Ponies. The one is 49 and the other is a 52 I think. I am looking for cultivators for the one and a disc for the other one. Can anyone out there help Live in south central Penna. Thanks, Carl.

Denny wrote on Thursday, September 10, 2009 (PDT):

Just purchased a pony with head lites and a fender lite.I need guards and knives for the sickle bar mower! Please help. Denny

Doug Sharp wrote on Thursday, September 10, 2009 (PDT):

Would like to know proper placement of massey harris pony decals

PIETER FERREIRA wrote on Monday, September 07, 2009 (PDT):

I AM LOOKING FOR A COMPLETE MARVEL SCHEBLER CARBURETOR FOR A MASSEY HARRIS PONY TRACTOR.I AM IN SOUTH AFRICA AND WANT TO KNOW WETHER YOU HAVE THIS AND HOW CAN I GET IT HERE IN SOUTH AFRICA

Dave Sexsmith wrote on Tuesday, July 28, 2009 (PDT):

I just bought a Pony haven t even got it home yet . It s going to be a long term project as it s not running. I haven t got the serial number off it yet but, I ve noticed the front axle looks different than the ones I ve seen on the internet. All the photos I ve seen show a front axle which is a straight round steel tube, identical to the one on my Pacer. This Pony, however, has an arched front axle. When I saw it the first thing I thought of was a wishbone . Can anyone give me any info on this type of axle

ed nester wrote on Monday, July 13, 2009 (PDT):

i have a massey harris that has been settinf for a few years it cut off one day and never would start again being not much of a mechanic ive never persued fixing it if i had to guess it just isnt getting any fire. not sure whats the value of this

Mike wrote on Sunday, June 28, 2009 (PDT):

My grandfather bought a repossessed Pony in the 50 s for 700- 800. He would bring it to our house to plow the gardens and when I was around12 or so I would do the driving about 4 miles between our houses. My Dad eventually ended up with it. This tractor has plowed snow up here in the rugged Maine winters,Hauled many cords of wood, both tree lenght and 4 wood on a trailer wallowing through the mud. Plowed, harrowed and cultivated our family gardens. Oh I almost forgot, when I was around 4,5,or 6 my Dad used her to mow the field hauling an old horse drawn sickle bar mower and horse drawn dump rake. These tractors may be called Pony but they work like a Horse!!

Gene Cannon wrote on Sunday, May 31, 2009 (PDT):

I grew up on a farm in North Carolina in the 50 s. My dad bought me a used Massey Harris Pony when I was about 10 yrs old. I used it to pull tobacco trailers, plow the garden and just to play with ... I always would try to find a steep hill to climb finding a steep hill in the flat lands of eastern N.C. is not easy . I drove it a lot on the country roads when trucking tobacco. We had an old Studebaker car on the farm that I played with on the field paths. I took the horns off the car and mounted them above the headlights on the tractor with a horn button attached to the steering column. I always enjoyed the reactions of drivers along the road when I blew the horns as they passed. Just wanted to share some of my pleasant memories from the past when I had a Massey Harris Pony. Gene Cannon Wendell, NC

JOSH wrote on Saturday, May 23, 2009 (PDT):

i have a 1952 pony. i need the PTO and implements for it where can i find them

Lyman Williams wrote on Sunday, May 17, 2009 (PDT):

I would like to know the paint colors for MH Pony. E-mail to lymanw at hughes.net. Thank You.

harold counsell wrote on Monday, May 04, 2009 (PDT):

I have just purchased a Canadian built Pony. I live in the U.K. The year of manufacture is about 1950, but I am looking for a Marvel Schebler carburettor for it can anyone help. Thanks

Harry Moberg wrote on Thursday, April 16, 2009 (PDT):

dkschmidt The Pony wtll not pull a 2 bottom plow. I tryed it and brock the tractor in half by the engine.

Chris Stuart wrote on Thursday, April 16, 2009 (PDT):

I am currently looking to buy a pony. Our neighbors have one in their shed that has not run in years, and is in need of restoration. Is 500 a reasonable offer

Mark Pane wrote on Friday, April 10, 2009 (PDT):

What type of transmission fluid is used for a 1948 massey Harris Pony Is universal fluid ok

H. Debiaggi wrote on Saturday, April 04, 2009 (PDT):

I have owned a 1946 pony tractor since 1950 with all its original attachments. I“d like to know where I“ll be able to buy three stickers that reads; Massey-Harris. And the other, that only reads; Pony. If you have any idea, please send me an e-mail.

gordy d wrote on Monday, March 30, 2009 (PDT):

have a 1 bottom pony plow for sale. please call if interested.847-669-3140.

Ernie D. wrote on Saturday, February 28, 2009 (PST):

I am located in Virginia, USA, and looking for a single 14 bottom plow with hook-ups/attachments for a M-H Pony. If you have one or know someone that does call me at telephone #540-832-3096.

dkschmidt wrote on Wednesday, February 25, 2009 (PST):

I am looking at purchasing a pony, I see in my readings that it could take a 1 bottom plow 14 . Does it have the wear with all to take a 2 bottom plow

E. W. Duncan wrote on Tuesday, February 24, 2009 (PST):

I have a restored 1949 Massey-Harris Pony tractor with cultivators. I am looking for a bottom plow made for the Pony. If you have one for sale or know of one please email me.

jessica wrote on Monday, February 23, 2009 (PST):

I have 1949 pony tractor, oringal paint,oringal tires,etc comes with attachments , any ideas what to price this at been in a garage its whole life

ted donovan wrote on Sunday, January 18, 2009 (PST):

I have a pony s/nPGA2745A.I can t find that s/n listed anywhere. Its a canadian machine. Can anyone help Ted

Walt Brilhart wrote on Tuesday, December 23, 2008 (PST):

I have a set of cultivators for a MH Pony that are in very good condition. We no longer use the tractor for planting. Make me an offer. 410-848-4764

Robert Hale wrote on Wednesday, December 10, 2008 (PST):

I am looking for the oil dipstick for a Massey Pony for a friend. I m not sure if they would all be the same. Anyone have a spare, or know where I might get one

wyoo easter wrote on Saturday, November 29, 2008 (PST):

i have a33 mssy hris ned 6 vlt gnnrrtr ya no were wil sell if right prc damn good condion

Adam Vanderkleyn wrote on Thursday, July 17, 2008 (PDT):

Hi. I am looking for a carburator for a pomy massy, serial number N62 29740 the name on the carb on it is a Marvel Schebler.

danacad wrote on Friday, May 30, 2008 (PDT):

bonsoir je possĆØde un Pony 820 Diesel de 1959 fabriquĆ© en France il est superbe salut a tous le monde et vive Massey Harris

Barry Sturgis Jr. wrote on Sunday, May 04, 2008 (PDT):

QUESTION THE PICTURE ON THIS PAGE, WHAT MODEL OF TRACTOR IS THE TRACTOR PICTURED NEXT TO THE PONY pLEASE RESPOND.

W. Dunning wrote on Wednesday, March 12, 2008 (PDT):

The Massey Ferguson plant in Brantford, Ontario, Canada, closed in 78 or thereabouts. Many records were sent to the University of Guelph, in Guelph, Ontario, Canada. You can find most of the specs on the PONY and other Masseys there.

Bob Persichetti wrote on Monday, March 10, 2008 (PDT):

My father in-law owned a 1955 pony at his farm in Western PA. He had is pony rebuilt in 2000 converted to 12v . It has not run for the past 3 years. The engine will crank but no luck starting. Any ideas for trouble shooting or local service shop

John Miller wrote on Saturday, February 23, 2008 (PST):

My father, W.G.Miller, was a chief engineer at Massey-Harris then Massey-Ferguson and was in charge of the design and testing of the Pony. Every once in a while, back in the 50 s when I was a little boy , a truck would deliver a Pony to our house in Islington. I have memories of driving it with my Dad and of chasing rabbits with it in the field behind our house!!! As a Physics prof in Quebec, when my students said Yabbut when they were trying to figure out what I was saying, I would tell them about chasing yabbuts with a Pony tractor!!! Strange as it may seem, it s very touching to me to find this site!!!

John Gallimore wrote on Saturday, February 09, 2008 (PST):

Hello, I bought a very sad 1953 pony for my 50th birthday, and have since restored it.I live in central France, where ponys can still be found, usually at the back of barns ! Arild Magne Olaisen wrote on Wednesday, December 19, 2007 PST ; The engine is indeed a simca Aronde Flash, with aluminium cylinder head.These engins were adapted from the car with massey harris castings. Also used was a peugeot engine.These machines were assembled in /northern France from 1951 to 1957, many being exported to the French African colonies. I have fitted a hydraulic pump from a renault 22 tractor, but would like to find the original type pump combined water and hydraulic in any condition. If I can be of help please e-mail me at gallimore.john at wanadoo.fr.

Tommy Stutts wrote on Sunday, January 20, 2008 (PST):

I have a Massey-Harris Pony that my dad bought new in 1953. All the Ponys that I have seen are red with yellow wheels. This Pony is painted gray with gray wheels. Can anyone tell me if this is right color I haven t seen another Pony painted this way. Thanks for the help.

Brian Myers wrote on Monday, December 31, 2007 (PST):

I have a Pony for sale that has been completely restored. It has a hydrolic lift, plow, mower, and cultivators. You can email me at big44 at socket.net

Edward Decker wrote on Sunday, December 30, 2007 (PST):

It s good to see this site for Pony owners. I used to own one myself. It was a 1949, in great shape. Bought it in 1997, restored it, used it for 7 years equiped with a snowplow. I also ran a hydraulic wood splitter from it, and a Thomas Watson #1 rock crusher. It worked like a charm. You know what The only problem I had in 7 years was with the distributer getting damp and causing misfiring when the engine was cold Despite having all NEW Distributer cap, rotor, wires and plugs Yea...as you would probably guess, I realy miss that old pony...You know, if I had my time back, I wouldn t have sold it. I found some pictures from the restoration, and the more I look at them, I want to track it down and buy it back, if they re willing sell....Anyway, if anybody reads this and they are thinking about selling their own pony, stop and think first how life will be without it. Cheers!

Doug Distel wrote on Saturday, December 29, 2007 (PST):

I just bought a MH Pony and would like to restore it. I need pretty much all sheet medal. Anoyher parts tractor would be nice. The serial no. is PGA9320A and doesn t fit in the serial number guide. Does anyone know what year it is Thanks for your help.

Arild Magne Olaisen wrote on Wednesday, December 19, 2007 (PST):

Dear sir. I have a friend that have a Harris Pony 812. The engine is gone, and it has been a Simca engine in it. Are there someone that migt guide me to the right simca or talbot car that had this engine What was the name ow the engine and what brand was the car s. Best regards Arild Olaisen

James Frederick wrote on Wednesday, December 12, 2007 (PST):

I have a massey harris pony serial# pga 16635 can you tell me what year it is. Thanks

cary hager wrote on Saturday, December 08, 2007 (PST):

I have a 1952 pony with hydraulic lift want to know if there is a way to convert from 2 point to 3 point hydraulic system on my tractor. Tractor is totaly restorerd looks great. Hope some one can help me thanks.

Simon,Eilish Swayne IRELAND. wrote on Thursday, November 15, 2007 (PST):

We have 1945 and 1946 massey harris ponys,fully restored by our dad and granddad would like some more.

DeWayne Nall wrote on Sunday, November 04, 2007 (PST):

I have what i was told to be a 1947 Massey Harris pony. After looking at this site, i see that it might be a 1948! The gravity fed carb. keeps overflowing and the exhaust stack needs to be welded back on. Other that that , the tractor is in pretty good working condition! Know anyone who is interested in buying it and what is it worth

DeWayne Nall wrote on Sunday, November 04, 2007 (PST):

Alan Roberts wrote on Saturday, November 03, 2007 (PST):

I have a 1955 Pony tractor with hydraulic problems. Does anyone sell rebuild kits for this tractor Thanks for any help. The tractor has been rebuilt and runs great and is used often.

Ken Taylor wrote on Thursday, October 18, 2007 (PDT):

I Would like to know what my mid 50 s MH pony is worth. It has t ran in 10 years. it is pretty much complete with wheel wieghts.

Brad Bates wrote on Wednesday, October 03, 2007 (PDT):

Have a M-H-F pony with grey paint underneath the red, would like to paint it correct grey color. Do you have this code tires also say M-H-F Thanks for info - by the way, what is it worth in super nice shape i ts sheet metal is all original and very very straight. thanks

Joe Bish wrote on Tuesday, September 25, 2007 (PDT):

I have a Massey-Harris Pony, serial or model no. 850156m2. I would like to know what year it is. Joe

Ron Wallace wrote on Thursday, September 20, 2007 (PDT):

FOR SALE Moving Must Sell !!!!!!!!!!! 49 Pony with 4 Howe brush hog - still using it mowing 6 acres, runs great, Having to move must sell!! Has hydrolic lift, 3point hook up class 1,Rear PTO, lights work, new battery, new front tires, electric start of course hand crank for the adventurous ones 5,000.00 Call Evenings After 6;30pm CST 972-633-8047 or e-mail ; KD5OYK at verizon.net

chris zankowski wrote on Friday, September 07, 2007 (PDT):

I have a pony needs some work ,runs I was thinking about selling it i was wondering if anyone knew about how much to ask for it thanks chris

chris zankowski wrote on Friday, September 07, 2007 (PDT):

I have a pony needs some work ,runs I was thinking about selling it i was wondering if anyone knew about how much to ask for it thanks chris

JOHN BALL wrote on Saturday, August 11, 2007 (PDT):

I AM LOOKING FOR THE 3 POSITION SWITCH FOR CHARGING AND THE LIGHTS DO YOU KNOW WARE TO FIND THEM

Irene Macadie wrote on Friday, August 10, 2007 (PDT):

My husband has just purchased a Pony which is French Built it has no registration needing an age related number can anyone help with where we would get chassis number etc. Thanks

Roy Dean wrote on Tuesday, August 07, 2007 (PDT):

Hi everyone I have a 1948 Massey Harris Pony and I am in need of a steering box for it mine is shot. Anyone know of one please let me know. Thanks Roy

JD Hodgen wrote on Thursday, July 05, 2007 (PDT):

I have a MH Pony Serial # PGA21053. Can somebody tell me what year this tractor is. Thank You.

keith wrote on Wednesday, June 13, 2007 (PDT):

how much would you expect to pay for a massey harris pony tractor today

Robert Brunetti wrote on Saturday, May 26, 2007 (PDT):

I have a Massey Harris tractor from the fifties an it still runs I would like too trade it for a tractor that has a front bucket can anyone help me

George D Brown wrote on Friday, May 18, 2007 (PDT):

I have recently purchased what i believe to be a Massey Harris Pony tractor .The number on the engine plate is N6242932.Below the engine plate is another number 850-095 M1 Can anyone tell me what year the tractor is and is this a Massey Harris Pony 20 tractor Made in Canada I would appreciate any information on this tractor.

gordy wrote on Saturday, March 17, 2007 (PST):

i have a 1 bottom 14 in plow that i believe is for a massey pony. still has a massey harris decal on back of moldboard. it is forsale. thank you

Kevin Currie wrote on Thursday, October 12, 2006 (PDT):

Looking for front snow blade for pony tractor please e-mail me.

Patrick wrote on Wednesday, October 11, 2006 (PDT):

I have a 1949 Massey harris pony i am selling was wondering if anyone knew the production weight or any other specs.

Dennis Bourns wrote on Wednesday, October 04, 2006 (PDT):

Hi Guys I just purchased a Pony, for restoration, it isn't running, I need parts and good pictures, can you point me to the best source of parts please? Thanks Dennis

David Holbrooks wrote on Wednesday, October 04, 2006 (PDT):

I have a 1949 Massey Harris Pony tractor for sale. It is listed on e-bay. Enter in your search Massey Harris (ferguson)Pony Farm tractor 1949 and it should come up. My email address is lvholbrks at yahoo.com

Fridtjof Bergmann wrote on Wednesday, October 04, 2006 (PDT):

I am looking to buy a Massey Harris Pony tractor location does not matter pls send me an email with photos and detailed info on condition

Roger wrote on Wednesday, September 20, 2006 (PDT):

I have a 1954 MHPony.I am looking for info/pics/parts to hook-up my front plow.

Marc Hensley wrote on Monday, September 11, 2006 (PDT):

Mr. Hansen, I would love for you to email me if you are still interested in a sickle bar and pulley for your MHPony, I think I may have what you are looking for, we dont intend to use them we are making a parade machine only and we would be glad to send some photos of the equipment so you could determine if its what you want.

John Hutchins wrote on Saturday, September 09, 2006 (PDT):

My dad bought a MHPony in 1957 new, in fact traded a team of horses in on it. I can tell you that tractor did a hell of a lot of work and burned almost nothing for gas. It was a great tractor for the garden,haying, and yarding and cutting firewood.A bit too small to tow a bailer, but it would mow and rake hay as fast as any big tractor. My dad still has it and it's still in pretty good shape, except the steering box is worn making steering hard and sloppy.Would like to replace the steering box for him as hes 85 years old and still uses it. Anyone have one?

Bobbi Parkison wrote on Thursday, August 31, 2006 (PDT):

My husband's friend has an old Massey Harris Pony TL made in Canada, and he does not know the year. They are interesting in selling it, and don't know how to price it. What do we look at to find out its value? No serial numbers found.

Paul Hansen wrote on Sunday, August 27, 2006 (PDT):

I just bought a Pony # PGA18737 and would like to know the year. Also does anyone have a sickle bar for it and the pully for the belt of the PTO.

Bud Rokes wrote on Monday, August 21, 2006 (PDT):

I have a MH Pony serial # PGA2290A doesn't match serial number guide...any idea what year?? thanks

Fridtjof wrote on Thursday, July 06, 2006 (PDT):

looking for a Massey Harris pony to buy has to be in good running condition, but alright if it needs paint job or small restore. pls send email diddi at lsh.is

Robert Donaldson wrote on Friday, June 30, 2006 (PDT):

Just acquired a Pony for restoration. It“s Serial Number is 5490. Can you tell me the year of manufacture, please ?

GEORGE STARLING wrote on Monday, June 12, 2006 (PDT):

MASSEY HARRIS PONEY LISTED ABOVE at $3,500.00 REDUCED TO MOVE at $2,500.OO REFURBISED LOOKS JUST LIKE PONY,S at THE TOP OF THIS SITE

GEORGE STARLING wrote on Monday, June 12, 2006 (PDT):

MASSEY HARRIS PONEY LISTED ABOVE at $3,500.00 REDUCED TO MOVE at $2,500.OO REFURBISED LOOKS JUST LIKE PONY,S at THE TOP OF THIS SITE

GEORGE STARLING wrote on Monday, June 12, 2006 (PDT):

MASSEY HARRIS PONEY LISTED ABOVE at $3,500.00 REDUCED TO MOVE at $2,500.OO REFURBISED LOOKS JUST LIKE PONY,S at THE TOP OF THIS SITE CALL GEORGE at 519-825-4722

GEORGE STARLING wrote on Monday, June 12, 2006 (PDT):

MASSEY HARRIS PONEY LISTED ABOVE at $3,500.00 REDUCED TO MOVE at $2,500.OO REFURBISED LOOKS JUST LIKE PONY,S at THE TOP OF THIS SITE CALL GEORGE at 519-825-4722

Holly Hoover wrote on Tuesday, May 30, 2006 (PDT):

I Have a Massey-Harris Pony the serial # is PGA1127A could you tell me what year it is? THANKS!!

ernie Wolf wrote on Wednesday, May 24, 2006 (PDT):

I am trying to find out the Mfg. of a sickle bar mower. That I am refinishing ,the only thing I have to go on is,color appears to be Red &Green .Also the part #'s6847E, 6840E ect.Any help would be appreciated. Oh the bar is 40" long.Thank you Ernie.

Dan Carruthers wrote on Monday, May 22, 2006 (PDT):

I have a Massey Pony that i need to rewire, anybody have a wiring diagram or can give me any help?

Steven Sletten wrote on Saturday, May 06, 2006 (PDT):

I have a Massey Poney. S.N. PGA3714A can you tell me what year it was made. It has been refurbished and is for sale.

GEORGE STARLING wrote on Wednesday, May 03, 2006 (PDT):

MASSEY HARRIS PONEY REFURBISHED $3500.OO CAN 519 825 4722

GEORGE STARLING wrote on Wednesday, May 03, 2006 (PDT):

MASSEY HARRIS PONEY REFURBISHED $3500.OO CAN 519 825 4722

steve macmullin wrote on Tuesday, April 25, 2006 (PDT):

I have just recently aquired a 1949 massey pony.anyone know where to get decals and manual for this machine runs great. came with snow blade and plow.

Don Loney wrote on Thursday, April 20, 2006 (PDT):

I seen a massey traqctor which appears to be a pony model. It has a fork lift mounted on the back. The brakes and clutch pedals are mounted so the operator sits and faces the rear of the tractor.does antone if this was a production model?

Jim MacNeil wrote on Friday, April 14, 2006 (PDT):

I have a '49 Massey-Harris Pony tractorwith garden plow. I would like to receive instructions for hooking it up and also picture if you have one attached

Wayne Proper wrote on Wednesday, April 05, 2006 (PDT):

We live in Washington State and own a 1947 Pony. We need a part for our carb and don't want to buy an entire carb. Does anyone have or know where we can buy the bowl that the float sits in? Otherwise, our Pony runs good and loves to work on our 3.5 acres. Please let us know if you can help us.

tess wrote on Tuesday, March 21, 2006 (PST):

I have a Massey Harris Pony tractor, and want to know what year it is the serial is PGA15827, and how much oil will it hold

Kevin Harwell wrote on Thursday, March 16, 2006 (PST):

I have a Pony with hydraulic lift, and am interested in finding implements for this. If anyone has something, please e-mail me. Thanks

John Cook wrote on Sunday, March 05, 2006 (PST):

I have a 1947/48 Pony for sale. It has a Continental rebuilt engine, not in frame. I put in a PTO, rear tires are loaded, 85% new. Front tires are not original but rims are. Located in Moncton, New Brunswick, Canada.

jan sligman wrote on Saturday, March 04, 2006 (PST):

i am living in holland.i own a pony from 1950 and i wand to now the RAL color numbers. thanks

GEORGE STARLING wrote on Thursday, February 16, 2006 (PST):

I HAVE [2] MASSEY HARRIS PONYS ONE REFURISED AND ONE NOT A SINGLE FURO PLOW AND DOUBLE ROW DISC,S IF YOU WOULD LIKE TO TALK SEND E- MAIL TO GEORGE IN ONT, CAN.

Dan Osborn wrote on Thursday, February 02, 2006 (PST):

I have a Pony and want to know what year it is. I have the following serial number - PGA2536A. I looked at you list of serial numbers and can not match my number with the list. I have the adjustable front axle also. Thanks

Robby wrote on Wednesday, December 28, 2005 (PST):

Hi, I recently purchased a MH Pony from a widow that didn't know much about it and there is a small shaft (Approx. ¼") that comes out of the left side of the final drive gear ahead of the rear axle and just below the seat that I don't know what it is for. It sticks out about an inch and has a tiny hole at the end as if something was attached. Can anyone tell me what its for? Thanks

jon wrote on Sunday, December 11, 2005 (PST):

looking for a set of side panels for a pony tractor,and any information about what type of loader that you could get with them,and a lead on a diesel motor for a pony?

Ken Foster wrote on Monday, December 05, 2005 (PST):

I am restoring a 48 pony and need to know about decals, and colors for this tractor. Please send pictures or any information on this. Thank you in advance.

Ruth-Ann wrote on Friday, November 18, 2005 (PST):

We're having a problem with our Pony's electrical system on the tractor we're restoring. It's the original generator and starter and has a new battery, but it's draining the battery. The manual we purchased doesn't address this issue. Does anyone have any suggestions/solutions/tips for us? Thank you in advance.

David wrote on Thursday, November 17, 2005 (PST):

Just got an old pony, 1st time restore project. could use photos of one with proper decals & paint job, as well as parts resources. North Fla.

g. o. greene wrote on Tuesday, November 15, 2005 (PST):

Does any one have a flywheel or flywheel ring for sale?

Luke wrote on Sunday, November 13, 2005 (PST):

I have 1953 with many attachments. I love it,it works wonderfully

Jerry wrote on Friday, November 11, 2005 (PST):

Have Massey Harris Pony tractor, complete and original. Engine totally rebuilt, thanks to this website. Will sell, or trade for old Dodge or Diamond-T pick-up truck.

kevin wrote on Saturday, October 29, 2005 (PDT):

wanted step by step instruction for rebuild of tsv 24 carb for massey harris pony tractor. Have new kit but no instructions. My carb is missing most off these rings and packing

Southwesteader wrote on Wednesday, October 26, 2005 (PDT):

Can any one tell me how wide the pony is?

Wanda wrote on Friday, September 30, 2005 (PDT):

I have a Massey Harris Pony Tractor...Serial #16559. Can anyone tell me what year it is?

R W Wallace wrote on Thursday, September 22, 2005 (PDT):

Update on the PTO situation (4 entries above) Found a place in Dallas, Texas that makes custom gears, shifter forks ,and even PTO/ transmission shafts etc.. they took my broken shaft and custom machined a one piece new one. These guys are great. They are Machine Tool & repair shop, here is the info for anybody that wants it. Machine Tool & Repair, Inc 4770 Iberia Dallas, TX. 75207 214-631-8120 fax 214-638-1008

Ken wrote on Saturday, September 03, 2005 (PDT):

I have a couple of Ponys and I am looking at a good after marekt 6 volt light set up that would come close to the OEM ones that MH used. Any thoughts or ideas please e mail me. Thanks Ken

Steve Morphy wrote on Friday, August 26, 2005 (PDT):

I have a Earthmaster Model C made in 1948 that has a Continental N62 engine. I am in need of a good carb.I need all the help I can get.

Juan Velasco wrote on Monday, August 22, 2005 (PDT):

I have a Pony tractor. I gat from GMU ecuador south américa. I would like to know about gennuine parts. Please send me a catalog. Thanks Juan

R W Wallace wrote on Sunday, August 21, 2005 (PDT):

I have a `49 Pony with PTO put on the rear of the transmission. Not sure if this was the ussual way it was done back then. The small (approx) 1 dia inch shaft that runs the PTO (in the rearend), striped the splins on the shaft. Need to know where I might get parts, if this was regular equipment. I very good at fabricating but the splined cuped ends are more than a challange to make. Thanks for any help or ideas.

Ernie Wolf wrote on Monday, August 08, 2005 (PDT):

This is to Scott Mapes. I have a M.H. Pony Tractor with some implements.Such as plow,blade, sickle bar mower, disc. It also has Hyd. let me know if this is something you are looking for .Thank You!

scott mapes wrote on Sunday, July 31, 2005 (PDT):

Igrew up on a massey pony my grandfather had one that was the first tractor i ever drove i spent countless hours on it mowing hay or plowing. is there an association of pony owners if there is then how do i get in contact with someone .maybe one of these days iwould like to own one.

Red wrote on Saturday, July 16, 2005 (PDT):

I am looking for a Massey Harris Pony hood and sheet metal side panels. If anyone can help me locate them, I would greatly appreciate the information.

bob wrote on Thursday, July 14, 2005 (PDT):

iwould like to know what a m-h pony in fair condition is worth

R. Baird wrote on Wednesday, June 29, 2005 (PDT):

eddie smith iam interested in your m-h pony, where are you located

dennis miller wrote on Wednesday, June 29, 2005 (PDT):

need hydrulic lift parts an paint colors for MH pony

leon johnson wrote on Tuesday, June 28, 2005 (PDT):

still, have 1948 massey pony, for sell. in responce to michael and jennifer masters. sorry for the late responce, have been out of town.send e mail addr. i will responde. i live in summerdale, alabama.

Eddie Smith wrote on Saturday, June 18, 2005 (PDT):

I have a 49or50 masseyharris with hydrualt lift with wheelweights and cultilvator the motor froze and busted I took the motor off its good for parts only its got lights sell all for 700 obo 6 1805

Claude Bowers wrote on Tuesday, June 14, 2005 (PDT):

I have a pony tractor that I acquired from my uncle. It is in good shape and was running when parked a couple of years ago. I plan to restore it and use it for hobby farming and utility work. I would like to get a repair manual if anyone has access to this. I am willing to pay for copying and shipping .

Leon Johnson wrote on Sunday, May 01, 2005 (PDT):

I have a1948 massey poney for sale. runs great, has cultivator,and pto for fertlizor hopper or mowing machine.

Bill Silva wrote on Friday, April 29, 2005 (PDT):

I need help finding a distributor for a Massey Harris Pony. Thank you.

Victor Wiles wrote on Friday, April 29, 2005 (PDT):

For Sale; 1957 pony with 5' belly mower Located in Iowa

Lena Knighten wrote on Monday, April 18, 2005 (PDT):

I recently went to a public sale and bought the Pony tractor that my father bought new years and years ago. I used it to plow my garden and it worked great. It is missing a side panel and one headlight is gone, Otherwise it is in good shape. Oh almost forgot. I also have the original title (yes I said title). It is still in my fathers name. Lena Knighten Inwood, Wv, USA

steve lail wrote on Sunday, March 20, 2005 (PST):

LOOKING FOR MOLEBOARD PLOW AND CULTIVATORS FOR M-H PONEY CLOSE TO VA.THANKS.

R Primer wrote on Tuesday, March 08, 2005 (PST):

Could you please let me know where you live. I'm interested in the Pony but need to know how far away you are from us, so that I can figure the cost of getting it to our area.

steve wrote on Sunday, March 06, 2005 (PST):

!!!! for sale !!!! I have a massey harris (poney) whit a lot of things to put at the back like a lawn mower,many farm work machine a chain set for the back weels .tractor work's good .send me e mail

Kevin wrote on Monday, February 21, 2005 (PST):

I am looking for a place to purchase the carburetor for a 1948 Massey Harris Pony. The number for the carb. is TSV-54U. If this carb. is not available any more, is there another model number that I can use in its place?

Roy Harbers wrote on Saturday, January 01, 2005 (PST):

looking for Massey Harris Pony parts; steering sector, sidepanels (L&R), grill, and battery cover box....any suggestions on where to look?

Jim Robillard wrote on Wednesday, December 29, 2004 (PST):

Lokking for a hydraulic pump for a Massey Harris Pony. This pump mounts on the front of the block behind the fan

Trent wrote on Monday, December 27, 2004 (PST):

Iam restoring a massey pony and i need some help on getting decals and manuals. it also has a seeder and plow on the bottom.

Don Collison wrote on Thursday, December 09, 2004 (PST):

Can someone help me with the correct colors for a 1949 Massey pony. I see the one in the shed is a red and yellow. is this correct and are there code colors?

Robert Mathers wrote on Tuesday, December 07, 2004 (PST):

Does anyone have a wiring diagram for a 1948 Massey Pony. Mine does not have lights or a light switch.It does have a generator cut out,instead of a regulator.I have to install all new wires.

Michael Barrow wrote on Monday, December 06, 2004 (PST):

I am looking for impletements to fot a Pony tractor. I could use anything that relates to gardening. Iam located in the Newport News, Virginia area.

KEVIN CURRIE wrote on Wednesday, December 01, 2004 (PST):

I am looking for help. I have a two way plow to go on my Massey Pony but am having trouble getting it working. I have seen same plow on other pony tractor. I can not get hold of owner. Does anyone have same plow and maybe able to help me.

Fred N wrote on Friday, November 26, 2004 (PST):

I have a massey harris tractor pony 4- cylinder in good shape. It runs good and has had a blade made by a professional welder. I would like to know the value of the tractor to possibly sell.

Richard Pence wrote on Saturday, November 06, 2004 (PST):

I have a Massey Harris Poney with tractor SR# PGA 23024, motor# N62 42934. Can someone tell me what year it was built? Thanks, Richard

Gijs van Wijk sr. wrote on Tuesday, November 02, 2004 (PST):

My father bought one on 28- 05 - 1949, the price of this tractor was Fl. 2250,00, then it was a lot of money, but he wanted to have one. in June 1951, my father past away, he was only 43 jears old, on that time I was 5 jears old, but I can remember that tractor very good, I have a picture of it on my desk. p.s. sorry for my bad englisch. Greetings from the Netherlands.

Joe Kelley wrote on Wednesday, September 15, 2004 (PDT):

I have an Earthmaster Model C, only made for two years in the late 40's. I am having a difficult time getting information on the Earthmaster however the appearance and the engine Contenental N62 look very similar to the Pony. I would like any comments on leads that may help.

Terry McHugh wrote on Tuesday, September 07, 2004 (PDT):

I own a 1949 Massey Harris Pony. I have cleaned it up and restored and it looks really nice. I parked it the other day in the barn. It drove perfectly. Apparently the wire for the retaining pin holding the gear shift lever came out. I found the pin on the floor. I could not get the shifting lever back into the shifting mechanism. I took the shifting mechanism off the housing. There is nothing worn or broken. Could you please tell me how to put the gears back into a neutral position and then how do I put the shift lever back into the shifting mechanism. Any help you can give me on this will be greatly appreciated. Than you. Terry McHugh

Bob wrote on Thursday, September 02, 2004 (PDT):

I have a 1947 Massey Harris Pony with snow plow for sale. Illinois

Bob wrote on Thursday, September 02, 2004 (PDT):

I have a 1947 Massey Harris Pony with snow plow for sale. Illinois

Richard Pence wrote on Monday, August 30, 2004 (PDT):

I have recently purchased a Massey-Harris Poney Tractor.It is a 1952 Model.

Arthur L. Banner wrote on Sunday, July 18, 2004 (PDT):

Have a 1949 Massey-Harris Pony for sale, How do I list it in your colum? Sincerely A banner

RJ wrote on Monday, June 21, 2004 (PDT):

wanted a MASSEY HARRIS PONY tractor that runs and drives tin dose not have to be good just wood like to get a MASSEY HARRIS PONY that runs and drives

Scott Moore wrote on Sunday, June 20, 2004 (PDT):

I have a Massy-Harris Pony and was wanting to put a backblade on it would it have anought power to pull it?

Brad wrote on Tuesday, June 15, 2004 (PDT):

I was recently given a Pony. How difficult is it going to be for me to find parts etc. for restoration?

Reno Bard wrote on Wednesday, June 09, 2004 (PDT):

looking for a left front spindle for my 1948 pony massey harris

teddy wrote on Sunday, June 06, 2004 (PDT):

does any one know the color code for the pony fixing to paint want it right

teddy wrote on Sunday, June 06, 2004 (PDT):

does any one know the color code for the pony fixing to paint want it right

Marcus wrote on Saturday, June 05, 2004 (PDT):

A friend of mine is going to restore a Massey Harris Pony and would like the original color scheme. Please e-mail me with any info.

Pete wrote on Saturday, April 24, 2004 (PDT):

Looking for manual, photos, help, etc. for springtooth cultivator and one row corn planter for a 1951 MH Pony. E-mail; pjkrelaw at netzero.com

sam wrote on Tuesday, April 20, 2004 (PDT):

Does anyone know the price of a Massey Harris Pony 812 from 1956 with Simca 17 motor in superb condition. Thanks a lot.

Mike wrote on Thursday, April 08, 2004 (PDT):

I need a clutch for a 1948 massie

Jerry Butz wrote on Tuesday, April 06, 2004 (PDT):

I am looking for color chips for paint matching for the body and wheels of a Massey-Harris Pony.

DAVE H wrote on Tuesday, March 30, 2004 (PST):

I HAVE LOTS OF PONY PARTS AVAILABLE FOR SALE.EMAIL ME

Gary wrote on Friday, March 26, 2004 (PST):

Any idea what a 1948 Massey Harris Pony in decent shape would be worth? Thanks for your opinion.

Gary wrote on Friday, March 26, 2004 (PST):

I have a 1948 Massey Harris Pony that is in decent shape that I would like to sell---Missouri

Hugh Box wrote on Sunday, March 21, 2004 (PST):

Restored a 49 Pony but i need hydralic handle contol valve and handle

Hugh Box wrote on Sunday, March 21, 2004 (PST):

Restored a 49 Pony but i need hydralic handle contol valve and handle

Sam wrote on Sunday, March 07, 2004 (PST):

I have very nice 1952 Pony was last used to pull onions in 1999 runs good and looks good will sell. Serious offers only.

Walter Allison wrote on Thursday, March 04, 2004 (PST):

Can someone tell me how the spin-on hub between the transmission and the brake housing is sealed? It looks like there should be an 0-ring, but there was nothing in mine. Thanks

Don Kratzer wrote on Wednesday, March 03, 2004 (PST):

I wish to delete the add I placed on feb.14,2004.can I do it using this form.thank you

ronnie osterbind wrote on Sunday, February 29, 2004 (PST):

found another # on trans cover plate....S166005ND694

manfred wrote on Sunday, February 29, 2004 (PST):

I'm looking for a bellymount cultivator setup for my '51 mh Pony....preferably near Toronto,or in Ontario, but would consider further afield for shipping. Thanks!

tom wrote on Saturday, February 28, 2004 (PST):

i have a friend that has a massey harris pony S# PGS 3484 and he looking for imformation on it like the year and where it came from thank you .

tom wrote on Saturday, February 28, 2004 (PST):

i have a friend that has a massey fergusion pony S# PGS 3484 and he looking for imformation on it like the year and where it came from thank you .

Don Kratzer wrote on Saturday, February 14, 2004 (PST):

I have a Pony that I would like to sell.It is in very orginal condition and the engine has had the valves ground and new rings.Asking $1800.I also have a MH disc; left and right plows and cultivators.located near Escondido,Ca

Ray Lowery wrote on Saturday, February 07, 2004 (PST):

I have a 1954 Massey Harris Pony tractor that I want to restore and want to know if you can put a 3 point hitch on it and if so, where do you get the parts and information. Thanks, Ray

Terry wrote on Sunday, February 01, 2004 (PST):

Need info on a grey MH/Ferguson pony Serial no. makes it a 53? Where were these made?when ? Is it a Ferguson not a MH? ferguson? Thanks

Andrew Bradley wrote on Monday, January 26, 2004 (PST):

My wife and I recently bought a barn in SW France for conversion. We inherited a MH Pony and would like to find out more about it - any comments greatfully received

Dan Michelon wrote on Sunday, January 18, 2004 (PST):

I have a pony tractor how do i find out what year it was made . thanks

Bob Miller wrote on Monday, December 29, 2003 (PST):

I'm interested in buying Massey Harris Pony from 1953 on up in good running condition in TX or OK area.

Mike wrote on Friday, December 26, 2003 (PST):

i just got a pony, and the clutch is blown. PLEAsE EMAiL ME IF YOU HAVE INFORMATION REGARDING A REPLACMENT OR AN INTERCHANGE FOR THIS PART. thzank you Mike

Bob Smalley wrote on Thursday, December 18, 2003 (PST):

I am trying to find a muffler for a Massey Harris Pony that is as close to original as is available. Most of the mufflers I find are to large in diameter to fit the hole in the hood. The problem is usually the crimped ends. Any suggestions would help me a lot as our Pony is almost ready to come out of the paint shop,and ready for the parades and shows of the summer.

jeff wrote on Monday, December 15, 2003 (PST):

whats a average price of a poney

Cody Hensley wrote on Saturday, November 29, 2003 (PST):

Well I have a massy Harris Pony and I was wandering if there were a smaller version to this one. and how can i find out what year it is. when you call ask for Cody my number is 704-629-3979

robert Cole wrote on Friday, November 28, 2003 (PST):

I need a battery box tray for a massey Harris pony. Where can I find one

Norman Callaway wrote on Thursday, November 20, 2003 (PST):

I have some massey pony parts also can supply sheet metal side panels mufflers and decals phone 306-567 4201

Norman Callaway wrote on Thursday, November 20, 2003 (PST):

I have some massey pony parts also can supply sheet metal side panels mufflers and decals phone 306-567 4201

Mary Langley wrote on Monday, November 10, 2003 (PST):

I need a PTO set-up for a Belly mower on a 1952 Pony I am in Liberty Texas

Dick Hileman wrote on Sunday, November 02, 2003 (PST):

Can you put a three point hitch on a 1952 MH Pony?

Ernest Browning wrote on Tuesday, October 21, 2003 (PDT):

I'm looking for TSV-24 carburetor kit for a 1952 Pony...Take it easy

Ryan O'Leary wrote on Thursday, October 02, 2003 (PDT):

I have 3 Pony's and a Pacer,all like new.My question is,I have a 2-way plow (left & right) and I don't know how to hook it up,or operate it independently?

Tony wrote on Tuesday, September 23, 2003 (PDT):

Would like info.on installing a pto on 1948 pony.Is this a major job and what parts are required? Are parts availble, and at what cost?

JACK wrote on Friday, August 29, 2003 (PDT):

Looking for a hydraulic system for a Pony.

Brad Hyatt wrote on Wednesday, August 20, 2003 (PDT):

I have front end for massey harris pony also hood and radiators willing to sell

KEVIN wrote on Wednesday, July 16, 2003 (PDT):

I have for sale a massey harris pony approx 1952 complete with mower attachment and hydraulics. This is in original condition and runs well. Any offers?

George Gay wrote on Sunday, July 06, 2003 (PDT):

I have a massey harris tractor (pony) how can I tell what year it is, how can I tell if it has Hydraulics, and how can i find implements for it. Thanks!

Darwyn wrote on Thursday, June 26, 2003 (PDT):

Just bought a Pony and have a couple of questions; - engine oil for warm weather - SAE 30? - what should I use in the transmission for grease? - where do I find a serial number to determine year? - where can you buy manuals in Canada? Thanks. Darwyn

Jeff Duncan wrote on Monday, June 23, 2003 (PDT):

I have an opportunity to purchase a Massie-Harris Pony with 3 attachments, it is in running condition with no missing parts as far as I can tell, but needs restoring. What would be a reasonable price to pay for this tractor. Thanks, Jeff

JAMES BARR wrote on Friday, June 13, 2003 (PDT):

HI>> I have a [ POA1032A ] pony and i am looking for the year / right colour code / and HP / any help would be great THANKS JAMES

Dan wrote on Wednesday, June 11, 2003 (PDT):

I have a MH Pony that has been converted to 12 volts. Any idea where I can find a distributor, or can it be converted to an electronic ignition. Would also like to know of a source of parts...thanks!

DARRELL DAME wrote on Tuesday, June 10, 2003 (PDT):

WHAT WOULD BE A FAIR PRICE FOR 1948 PONY NO ATTACHMENTS THE METAL IS IN GOOD CONDITION? THANKS FOR ANY INFO.

Ralph Wilson wrote on Monday, June 02, 2003 (PDT):

Looking for a PTO/Pulley unit to bolt onto back of my Pony. Also anyone out there with a R/L hand plow? Kitchener, Ontario

J. Garry wrote on Monday, June 02, 2003 (PDT):

Anyone have a MH pony for sale in East KS or West MO? running cond or better.

Bob Smalley wrote on Saturday, May 31, 2003 (PDT):

Just bought a MH Pony. Can't find the PSA # anywhere. Starter will not engage. New battery,ignition switch checks out,new battery cables,still no starter engagement. Need some help from a Pony gear head.

Cathy wrote on Thursday, May 29, 2003 (PDT):

I bought a 1952 Pony last summer, and it is mostly restored, a sweet running machine. I find it was impulsive to buy it, because I don't really need it. Have decided to sell it. Located in central Maine. It has a cord wood saw, log splitter, chains, front wheel weights and plow. Hydraulics work great. Asking $2100.

FrankJM wrote on Friday, May 23, 2003 (PDT):

I am looking at a 1952 Massey Harris Pony. It looks to be in good condition. I will come with disc, plow, R and L mowers, cycle bar. I am very new to this. Are parts still available? Who would have parts? I am in Connecticut. Can you give me an approximate purchase price? The people are asking $4500.00

David Reise wrote on Thursday, May 08, 2003 (PDT):

Have a Pony (with hydraulics) I've restored... have cultivators, and left and right hand plows, I need the small set of linkage that selects the drop of either the left or right hand plow. linkage is located on left and right side to rear of fender.. any leads contact me direct thanks in advance. David Reise Portsmouth Rhode Island

David Reise wrote on Thursday, May 08, 2003 (PDT):

Dave Hamer wrote on Tuesday, April 29, 2003 (PDT):

I just recently bought a pony and i would like to find out the year the only partI can see is A 1123

Jack Yingling wrote on Sunday, April 27, 2003 (PDT):

WHERE ARE THE IDENTIFICATION NUMBERS LOCATED,I FOUND A SET OF NUMBERS ON THE RIGHT SIDE OF THE ENGINE BLOCK, #A12CCA. BUT CANT FIND ANY THAT COME CLOSE TO MATCHING THE NUMBERS SHOWN ON THIS WEB SITE,WOULD APPRECIATE ANY HELP ON THIS SO I CAN FIND THE DATE OF MANUFACTURE.

Wayne Nieforth wrote on Thursday, April 24, 2003 (PDT):

Does anyone have any pictures of a Pony showing the original plow and how it attaches to the Pony. Also any pictures of the proper tiller attachement would be appreciated.

Kirk Lytle wrote on Sunday, April 13, 2003 (PDT):

I have a Massey-Harris Pony #850 095 MP model PGA 7755A that I bought from original owner's son. I bought to restore for fairs but have not done so and 2 years have past if interested in buying this tractor which is in good condition - please e-mail me.

Bill Emerson wrote on Wednesday, April 09, 2003 (PDT):

I would like to know what a mh pony with a plow and belly mower would be worth.

Vivian Barnhill wrote on Monday, April 07, 2003 (PDT):

Correction - It is a 1952 Massey Harris Pony 650534M3. Not sure value and would like to know. Or if you would be interested let me know.

Vivian Barnhill wrote on Monday, April 07, 2003 (PDT):

I recently got a divorced and received a 1957 Massey Harris tractor! It is in good condition and will run, we just cant seem to keep it running! I need to sell it but I don't have an amount that it is valued at, please could someone give me some figures. The body has been restored and some engine restoration.

DARREN PONCE wrote on Wednesday, March 26, 2003 (PST):

wanted ponys full tractors or parts in decent condition if possiable.THANKS

James Lingerfelt wrote on Friday, March 14, 2003 (PST):

Dad left me a 1952 Pony. I need an original color or color code. Also looking for a starter.

Wesley Turner wrote on Wednesday, March 05, 2003 (PST):

I just recently bought a fully restored 1949 Pony and would like to know how to hook-up and use the cutting plow attachment and the harrows. It has the original sunfower mowing deck currently on it. Any help would be geatly appreciated.

Larry Mayer wrote on Saturday, February 22, 2003 (PST):

I found some old 16mm film that my father made in 1948 when he was a salesman for a tractor distributor in SW Minnesota after WWII. It is a black/white home movie demo tape of a Massey-Harris Pony, high crop model with sprayer attachment. It shows the manueverability of the little jewel, as well the original lettering of the "Pony" insignia on the top/front radiator housing. I transferred the film to VHS. Copies are available for sale.

Keith wrote on Monday, February 10, 2003 (PST):

I have a very rare 1952 Pony that I am taking offers on. This tractor is a grey Pony and has every available option that was offered. It even has an original Sunflower belly mower. The tires are original with no cracks! This tractor has been kept in a heated garage since 1952 and has never been in the rain. The tractor runs as new and is a pleasure to drive. This is one of the rarest Pony tractors in the US. Tractor comes with original manuals and ad slicks showing great pictures of every implement available. email me at keith at libcom.com with offers.

Keith wrote on Monday, February 10, 2003 (PST):

David Eppel wrote on Monday, February 10, 2003 (PST):

I have a Massey Harris Pony with a one bottom plow. I would like to know how it hooks up.

Cathy wrote on Wednesday, February 05, 2003 (PST):

I heard from a company in Maine that some of the later Pony's came with a 3 pt. hitch. They suggested that I look for a salvage Pony with a 3 pt. hitch. So, now I am looking for parts. Anyone with a 3 pt. hitch on Pony being parted out?

bill rush wrote on Monday, February 03, 2003 (PST):

i am a rice farmer from arkansas, have a pony handed down from when my grandpa farmed, looking for an exaust manifold. i heard that the pony was the first with 3-point hitch, anything to it?

Marcanet Bruno wrote on Friday, January 24, 2003 (PST):

I be french collector antiques tractors.for sale where echanges, MH made in france;Pony 812 mecanique simca standar and vineyard, pony 812 mecanique peugeot standar, pony 820D mecanique Hanomag standar, MF 821D mecanique Hanomag standar, MF Landini four vheel drive RS4500 mecanique Perkins three cylinder.I not good speak english.

Cathy wrote on Thursday, January 23, 2003 (PST):

I have a '52 MH Pony. 2-pt. hitch and hydraulics work great. Does anyone have a part number of a 3 pt. hitch kit that can be put on my Baby?

Rick Bianchini wrote on Saturday, January 18, 2003 (PST):

I own a 1951 Pony. I am currently tearing it down for a restoration. The brakes are missing on the right side and the fenders are totally rotted away. This is my first large restoration. I have restored a number of old Briggs, Lauson and Cliton small enignes. Hopefully, this job isn't beyond me. Thanks, Rick Bianchini Arroyo Grande, CA 93420 805-474-6505

MARK wrote on Monday, January 13, 2003 (PST):

I HAVE A MASSEY-HARRIS TRACTOR. IT LOOKS LIKE A PONY.THE MOTOR TAG IS MISSING. THE NUMBERS ON THE MOTOR BLOCK ARE N62A 03 AND UNDER THIS NUMBER IS 10 2 50. THE CARBURETOR IS A MARVEL-SCHEBLER-TSV-24. I WOULD LIKE TO FIND MORE INFORMATION ON THIS TRACTOR.

Paul Sr. wrote on Saturday, January 11, 2003 (PST):

I am looking for a complete front end for a pony,From the frame to the tires. including the rounded piece that the axle is connected to.

Russ Spiller wrote on Wednesday, January 08, 2003 (PST):

I`m Looking For A Rear wheel Axle ,,, if any one could help me please let me know where to get one ,,

JOE wrote on Monday, January 06, 2003 (PST):

Ineed to know where to find the serial number on a pony tractor. Thanks Joe

tim brockman wrote on Thursday, January 02, 2003 (PST):

i have a massey harris pony for part. call if you need a part thanks tim.

Scott C. wrote on Sunday, December 29, 2002 (PST):

I am looking for the following equip. for my Pony; a No. 41 one row rear mounted corn planter and plates; a No.41 one row bedder/lister; a No.40 snow plow/dozer blade; a one row planting attachment that mounts on my No.41 spring trip cultivator. Any info or leads would be greatly appreciated. Thanks.

Jonathan wrote on Thursday, December 05, 2002 (PST):

I have a Massey Harris Pony and I am having trouble finding out what year it is and the engine spec and tune up settings. The Pony was made in Canada the engine # is 42252 A62E And the model # is PGA2276. Can you find me the year of the tractor and the engine spec and tune up setting?

ray lowery wrote on Wednesday, December 04, 2002 (PST):

I am in need of a hand crank for a 1955 Massey HARRIS Pony. if anyone can help me I sure would appreciate it. thanks, Ray

Robert wrote on Wednesday, December 04, 2002 (PST):

LOOKING FOR SIDE PANELS FOR 1949 MASSEY PONY IN CANADA

Tony wrote on Sunday, October 27, 2002 (PDT):

Can these (Pony) tractors be adapted to accept a hoe? Thanks

Christophe wrote on Thursday, October 17, 2002 (PDT):

I'm French and I have a Canadian Pony, and also another which was completely built in France. If somebody wanna talk about that and/or send me some pictures, go ahead!

Jim Bradley wrote on Sunday, September 29, 2002 (PDT):

Looking to buy A massey pony with hydraulics in the michigan, wisconsin, illinois, iowa, minnisota area

Michael wrote on Wednesday, September 18, 2002 (PDT):

I am looking for a generator to change my 47 Pony from 12 volt, back to a 6 volt. Please email me if you have one.

Bob Sutherland wrote on Monday, September 16, 2002 (PDT):

I have a 1952 Massey Harris Pony with hydraulic pump problems. The hydraulics used to be just weak and would not hold the cultivator plow up but now the pump will not even lift them at all. I am wondering where I can get parts and information on rebuilding the pump. Thank you!

gerry m wrote on Saturday, September 14, 2002 (PDT):

i have a 47 mh pony that has a bad crack in the block just wondering if anyone has a block in good shape they are willing to sell at a fair price cuz shipping will also be a factor and so will the exchange on the canadian dollar!!

Fred wrote on Sunday, September 08, 2002 (PDT):

I need a complete carb kit for a Massey Harris Pony. Does anyone know where I can get one?

lee wrote on Sunday, September 01, 2002 (PDT):

i have a massy pony all orignal it looks pretty good but would like to fix it up just wondring if it will hurt its worth if i do so

Gail K. Lemon wrote on Saturday, August 31, 2002 (PDT):

To the Harris Hater who wrote Aug. 11,02 You are somewhat right..About the Farmall Cub. THEY ARE SWEET and I have been looking to buy one for sometime, but looking for "that deal". We have Several tractors from8 to 9-N Fords to Allis Chalmbers to Farmalls and today we purchased a Massey Harris Pony.. WITH hydraulics.My husband has looked for years for one ad it is nice. But to us as "intitled to our opinion". The ugliest tractor ever made was a John Deere. Specially the old ones. What a yecky color green. (Sorry if I hurt anyones feelings.) Gail L.

Mike D. wrote on Wednesday, August 21, 2002 (PDT):

Where can I find Decals for a '47 Pony?

chris wrote on Thursday, August 15, 2002 (PDT):

I have A 1948 massey tractor with disc and two other attachments . send e-mail if wanting to make serious offer ...

Harris Hater wrote on Sunday, August 11, 2002 (PDT):

Y'all need to get a Farmall Cub. Ponys Are the ugliest thing on the planet! Just look at em. Now take a look at a Cub. Ponys don't even have hydraulics. Cubs may be a little underpowered, but they have more options. A hand lever is an option on a pony, but a hand lever and 2 years after Farmall Started, hydraulics were STANDARD. So take THAT.

Jeff Drew wrote on Monday, July 29, 2002 (PDT):

Looking for a steering gear for a 1951 pony. Mine is all worn out.

Noah L LaPan JR wrote on Thursday, July 25, 2002 (PDT):

I am looking for side panels for a 1950 pony could anyone help me

ken kennedy wrote on Saturday, July 13, 2002 (PDT):

FOR PONY S.N.PGA 18176 I THANK ITS A 1951 MY OIL PRESSER IS ABOUT 45 COLD ABOUT 10 HOT,CANT ADJUST .ITHINK THERES A SPRING WASHER UNDER BOTTOM OF SPRING THATS NOT THEIR.IF THEIR IS ONE IWOULD LIKE TO ORDER ONE.CALL.985-735-5395 OR EMAIL-BANDK at I-55.C0M -THANKS

Joe wrote on Thursday, July 11, 2002 (PDT):

Rare find. Compete working pony and implenents. Want to sell 1952 MH Pony, runs great, all parts there, original paint and stickers, stored indoors, hydrolics, garden plows, cultivators, field mower, disc harrow, all in good condition, has all the original manuals. Call 814-432-7547 or E-mail

Donald wrote on Wednesday, July 10, 2002 (PDT):

Im looking for a hand crank for a 49 M-H pony. If someone has one please email me with some information.

Edmond wrote on Monday, July 08, 2002 (PDT):

I would like to know if anyone out there has a picture of a M-H pony with a "potato cultivator" attach underneat. If so, could you please e-mail me a copy.

YOKABICH wrote on Saturday, June 22, 2002 (PDT):

I HAVE A M-H PONY '49 FOR SALE . IT NEEDS TIRES, PAINT AND STARTER (BUT IT STARTS WITH THE HANDLE). I WANT TO KNOW HOW MUCH I CAN GET FOR IT. ANY HELP WOULD BE GREAT, THANKS.

Kevin Parker wrote on Saturday, June 15, 2002 (PDT):

Iam lookingat a massey harris pony but don't know what year it is. Where is the serial number located at? any help would be great. thank you

george wrote on Tuesday, June 04, 2002 (PDT):

I need the peice that pushes the throw out bearing into the pressure plate , mine is wore out.

Bryan wrote on Tuesday, June 04, 2002 (PDT):

I just inherited my grandfathers Masey Pony, working on restoring, is already in great condition, looking for a hydraulic pump.

Doc wrote on Tuesday, May 21, 2002 (PDT):

I bought a Poney Serial # PGA 21443. I would like to know the correct year (I am thinhing it is a 52 ?)not sure. I would like to know the origial color for this tractor. The motor # is N 62 E40175 2. I will be needing some parts and need to know were to get them from. I also will be needing some side panals that covers the battery area. Need to know the wireing system. Would like a photo if anyone can send one so I can look at it to restore this taracor.Can anyone help? Thanks

Don Herrell wrote on Sunday, April 28, 2002 (PDT):

I have a1951 MH Pony,Need hydraulic cylinder,also correct paint info. Thanks

Richard Potter wrote on Friday, April 26, 2002 (PDT):

We would like to let all you Massey-Harris Pony tractor collectors out there, see our CUSTOM build Massey-Harris Pony Pedal Tractor. www.pottersfarmtoys.com/

Switzer's Auction & Appraisal Service wrote on Thursday, April 25, 2002 (PDT):

Massey Harris Pony & Implements for sale at Auction in Bancroft Ontario Canada, on May 18th, 1;00p.m. For pictures and a fax bid form see us at www.switzersauction.com

TERRY wrote on Monday, April 22, 2002 (PDT):

I have a chance to buy a continental engine serial #n62a225. Will this fit in my pony? It is out of a forklift lt35? Thanks for any info.

Darrell wrote on Sunday, April 21, 2002 (PDT):

I have a '51 Massey Harris Pony for sale. Complete, running condition, right and left hand plow, good tires. Make offer.

DAVID wrote on Thursday, April 11, 2002 (PDT):

FOR SALE;49 PONY WITH SICKLE MOWER.ALMOST SHOW CONDITION $ 3500.00 OR BEST OFFER.HOME # 651-489-1026 ASK FOR MEL

Chad wrote on Monday, April 08, 2002 (PDT):

I have a 1948 Pony that barely runs, but we use it to cut te grass in the fields and haul newly-cut trees. I just bought a shiny new Kubota to do the work. My question is--should I sell my MH for scrap, restore it to be a show tractor, or restore it to be a work tractor? If you have any clue how much money each choice would bring in, please email me. Thanks!

A. Driesse wrote on Monday, March 25, 2002 (PST):

I own a pony and would like some implements for it. I already have a plow, disk, scuffelers?, and cults. Do you know where I can get anymore Thanks

john perusello wrote on Monday, March 18, 2002 (PST):

to pual your tactor is a 1948 what parts do you need and what are tou willing to spend also how good of shape is you tractor

c.morris wrote on Monday, March 11, 2002 (PST):

I have a Massey Harris Pony,serial #PGA 1475 Would like to know what year?

Jim Bento wrote on Friday, March 01, 2002 (PST):

I just purchased a 1949 Pony I think and would be interested in some sheet metal and other parts, also correct paint scheme and labels

Tom Getz wrote on Wednesday, February 27, 2002 (PST):

I recently purchased a 1952 MH Pony and want to know the corrrect paint colors for it. Can anyone help me?

Michael D wrote on Wednesday, February 27, 2002 (PST):

Iam looking for paint codes for my 47 pony. If somebody can help me what colors to paint where,I partially sand blasted it and would like to know how to paint it original.

Alyssa wrote on Sunday, February 10, 2002 (PST):

I am looking for a Pony in the Midwest! If you have one and you would like to sell it PLEASE E-Mail me at monkeychic_07 at yahoo.com thanks

Bill Coffman wrote on Saturday, February 09, 2002 (PST):

Does a 1952 pony have a grey body and the rest is red? Ours does and they said it had not been painted. It so can you give me the paint numbers?

Ray wrote on Thursday, January 31, 2002 (PST):

i have a pony with two way 12in. ground plows does any one know were i can get shears for them. let me know thank you.

Darrel Harner wrote on Sunday, November 04, 2001 (PST):

I think I have A Massey Harris Pony ? It also looks like a Pacer How do I tell the difference between the two. Also how do I fined out the year, the motor # is N6227595. Left rear axle # Canada 850095M8 . Right side of frame neer engine PGA 12 100 ? Please if any can help please Email me in Illinois thanks

Rob Steinhaur wrote on Tuesday, October 23, 2001 (PDT):

I am looking at a 52 Massey Harris Pony it is in running condition and all the sheet metal is in good condition, the fellow is asking $800.00 CDN. does this sound like good price.

DEBBIE BEYER wrote on Monday, October 08, 2001 (PDT):

I have a 1952 Massey Harris Tractor with one bottom plow. I believe that this is a "Pony". Tractor does run and is in good shape. I'm trying to establish a value. Can anyone help me out?

Mike D. wrote on Thursday, October 04, 2001 (PDT):

I am looking for a service manual for a 1947 pony. Any info on this would be greatly appreciated. I am hearing a noise somewhere under the seat. When I engage the pto the noise seems to disapear. It doesn't matter if the clutch is engaged or not. there is a new clutch and throw out bearing. can any body give me some insight on this "noise"

Cliff wrote on Thursday, September 27, 2001 (PDT):

I have what i belive is about a 1950 pony but the engin is froze up on it. i was looking for any books on the engin and some where to get parts. any suggestions pleas e-mail me

Mike wrote on Sunday, September 23, 2001 (PDT):

Can anyone tell me what attachments are available either new or old for the pony tractor. If anyone has any available please let me know. I Have a Rear PTO belt drive & 1 1/8" splined shaft. Also,is it possible to buy (build) a maunal operated 3 point hitch (or hydraulic if I can adapt a pump)for these pony tractors? I have one that was just "given" to me. I have wanted a compact tractor with a loader / hoe for awhile but am not sure if I could ever adapt this one to meet my needs.

Mike wrote on Sunday, September 23, 2001 (PDT):

Can anyone tell me what attachments are available either new or old for the pony tractor. If anyone has any available please let me know. Also,is it possible buy a 3 point hitch (Maunal lift of course) for these pony tractors? I have one that was just "given" to me. I have wanted a compact tractor with a loader / hoe for awhile but am not sure if I could ever adapt this one to meet my needs.

Steve Garcia wrote on Sunday, September 16, 2001 (PDT):

I have what I believe to be a '49 Pony, but it has had some modifications made on the rear lift system. If anyone has pictures of how the disk is origanlly supposed to hook up I would greatly appreciate being able to look at them

Michael DeGroot wrote on Wednesday, September 12, 2001 (PDT):

I have recently bought a 47/48 pony. it works well and looks great. am looking for a seat, knob for the kill switch and a choke cable with the housing that fits in front by the gauges. any help would be greatly appreciated

Chris wrote on Sunday, September 09, 2001 (PDT):

I have a Pony tractor with belt pulley, hand implentment lift and PTO,(that works). I want to know where to find the serial number to find out what year it is and where to find some parts. If anyone can help, greatly apprecited. Chris

don sabers wrote on Sunday, September 09, 2001 (PDT):

i am looking for a drawbar to fit a pony i am in so. dak. please advise

Don Milne wrote on Thursday, August 23, 2001 (PDT):

I have a lot of parts u people are looking for.parted out 5 or 6 just to restore my own.Don Milne in Nova Scotia

Paul R. Thomas wrote on Wednesday, August 22, 2001 (PDT):

I need to know the original wheel color for the MH Pony. I have seen bright yellow, mustard yellow, and white, on restored Pony's. I also need the upper throttle lever clamp/bracket. Thanks for any info.

Gary Swann wrote on Friday, August 17, 2001 (PDT):

Any one know what distributor cap and rotor to use for MH pony>

R Seaver wrote on Tuesday, August 07, 2001 (PDT):

Looking at buying a circa 1954 MHF Pony - it doesn't have the PTO option or belt option - anyone know if these are available? Steering feels pretty stiff even after greasing - is this a concern? Where can I find parts and manuals? Any help much appreciated. -Robin

Norman callaway wrote on Friday, August 03, 2001 (PDT):

I have 4 massey ponys i make side panels as original also make original mufflers for massey ponys phone 306 567 4201 Davidson Sask Canada

Norman callaway wrote on Friday, August 03, 2001 (PDT):

I have 4 massey ponys i make side panels as original also make original mufflers for massey ponys phone 306 567 4201 Davidson Sask Canada

bruce pronesti wrote on Wednesday, June 27, 2001 (PDT):

i have a 1951 or 1952 massey harris pony does anybody know how the cultivator fits on it i cant figure it out

claude chamorand wrote on Wednesday, June 27, 2001 (PDT):

Hello, I'm looking for a rebuilt kit for a continental n62a500 (canadian pony) engine. Can someone help me? Thanks, Claude

Rod wrote on Sunday, June 24, 2001 (PDT):

IF ANYBODY WOULD HAVE A POWER TAKE OFF FOR A 49 MASSEY HARRIS PONY LET ME KNOW....I'M INTERESTED IN ONE,..PLEASE E_MAIL ME AT MASSEY_HARRIS_49 at YAHOO.COM...THANK YOU

BRIAN wrote on Friday, June 22, 2001 (PDT):

I HAVE A MH PONY AND NEED TO KNOW WHERE THE SERIAL NUMBER IS SO I CAN FIND OUT THE MODEL YEAR.

Clinton wrote on Tuesday, May 29, 2001 (PDT):

I have a Pony tractor and have a question about the fan. It's an oil filled fan, but there is no seal on the back of the shaft. How full do I fill the housing, and is there supposed to be a seal or gasket?

Daniel wrote on Saturday, May 26, 2001 (PDT):

A friend of mine recently purchased a MH Pony and is in need of a crankshaft. There is a serial #N62-C500 imprinted on the crankshaft.If there is anyone out there that can help us to replace this part, please E-mail me with the information.We live in Northern Ontario,Canada. Thanks!!

Rod wrote on Monday, May 21, 2001 (PDT):

just purchased a pony and the serial no. is PGA10387A, and would like to find out what year this is. E-MAIL me, thanks

Frank wrote on Friday, May 18, 2001 (PDT):

Two MH pony for sale a 1949 & a 1952. working order. $2000 for the pair or will sell seperatly. pictures available via email.

Ken wrote on Wednesday, May 02, 2001 (PDT):

I have a Pony with no serial number tag. Can anyone tell me if there is some other way to determine the year of manufacture. The tractor is red (repainted years ago) with gray wheels that seem to have original paint. Is this possible?

Holly Campbell wrote on Tuesday, May 01, 2001 (PDT):

My Dad has two pony tractors he is fixing up . And could sure use some help in finding parts. If you know could you please tell us . thanks

Paul wrote on Monday, April 30, 2001 (PDT):

I own a Massey Harris Pony, However, I am unsure what year it is. The serial number is PGS3957, and it was built in Toronto, Ontario, Canada. Also, I would like to know where I can find parts (Preferably Ontario).

Dan wrote on Tuesday, April 24, 2001 (PDT):

our pony needs a complete air cleaner assembly,fenders,side panels,carb kit

Ben wrote on Saturday, April 14, 2001 (PDT):

I am looking for; an original drawbar, lights, and any implements for a fully restored Massey Harris Pony. Must be in Ontario, Canada.

frank wrote on Friday, April 06, 2001 (PDT):

looking for pto attachment for a 1949 pony if you can help please e-mail me with details

Jackie wrote on Friday, March 30, 2001 (PST):

I have a 1952 Pony that I am putting up for auction at my next scheduled event sometime in May. If anyone lives near the Northern Virginia area, let me know. I'll send you a flier about the auction. The pony runs and is in nice shape.

Aly wrote on Thursday, March 15, 2001 (PST):

Has anybody got any info on a Massey Harris Pony PGA 3127A?

Garry Houpt wrote on Thursday, March 08, 2001 (PST):

Piston rings for M/H Pony can be found in open stock of perfect circle or TRW, check with a good auto parts dealer. If you have never overhauled a pony engine, you will find it rather expensive for such a small engine. Pistons are also hard to find. Some of the older massey feguson dealers may have a few carb kits for this tractor, I found one this way. I need an exhaust manifold for M/H pony if anyone out there has one for sale.

John A. McClain wrote on Saturday, December 09, 2000 (PST):

Would like to find a Massey Harris front mounted snow plow for my Pony. My address is John A. McClain, 1233 2nd Ave. E. at Horton, Kansas 66439 or Phone No. is 785-486-2108. I would give Pretty good money for one.

Stump Apple wrote on Sunday, December 03, 2000 (PST):

My dad bought one from my uncle in 1968. I grew up on it in our garden. I think he paid $300 for it. It had cultivators, Disc plough, turning plough, and a planter. It was a real good tractor for digging potatoes and working corn, but was easy to overheat in summer in N.C.

don lauger wrote on Wednesday, November 29, 2000 (PST):

I need to overhall my 1949 pony ,have been looking for engine parts,where is a good place to buy?

Dave wrote on Sunday, November 26, 2000 (PST):

I just purchased a pony at an auction, serial #PGA1293. Can anyone tell me how old this would be? direct me to a site with information on the Pony. I'm new to this!

David Neff wrote on Sunday, November 12, 2000 (PST):

Were can I find a motor for my pony? And were do you get the paint for them?

Fred Phipps wrote on Sunday, November 05, 2000 (PST):

I have a '48 Pony - hydraulics - started to "bring it back to life" but it's still in a coma! We live in Haliburton, Ontario (3hrs. NE of Toronto) 705-457-9694 $500. o.b.o.

Kevin Kyllo wrote on Sunday, September 24, 2000 (PDT):

I an restoring two MH Pony's and need good hoods and grills for both. What has anyone have available?

Colleen Rife wrote on Thursday, September 21, 2000 (PDT):

Looking for the proper paint for a 1951 pony body & wheels?

Dan wrote on Wednesday, September 13, 2000 (PDT):

I have for sale a complete right hand plow as well as a lever lift system from a 1948 Pony. (Changed mine to hydraulic lift).

Jeff Upchurch wrote on Saturday, September 02, 2000 (PDT):

I have a Pony in good shape and am looking for a rear grader or Snow Plow , Please call or respond if you can help with any information as to where I can find one . Thanks , Jeff Upchurch 765-489-6273 New Castle Ind.

Lou wrote on Thursday, August 31, 2000 (PDT):

I have a 51 Pony which needs a new manifold and carb. Does anybody know where I can get parts for my Pony?

XT wrote on Sunday, August 20, 2000 (PDT):

HAVE 1948 MH PONY IN SEARCH FOR HYDRAULIC PUMP,AND CYLINDER~TOO TRAY AND COVER~COMPLETE OIL BREATHER ASSEMBLY~CONDITION WANTED~GOOD

Mark wrote on Monday, August 07, 2000 (PDT):

I am interested in buying a pony to fix up. If anyone would like to sell one please let me know.

Jeroen Groenouwe wrote on Sunday, August 06, 2000 (PDT):

Hello, I have a Pony 820 from France, with an benzine engine from an peugeot 203. it is original. Has anyone any information on this Pony? especialy the rear axcel and driving unit.

marti wrote on Thursday, July 27, 2000 (PDT):

Just bought a 1951 pony - need implements. would like to hear from other Wisconsin MH folks.

mike wrote on Thursday, July 20, 2000 (PDT):

Ihave 2 MH pony tractors. One is complete minus the engine. The other has everything but is taken apart.Ihave the fenders. Interested in selling complete tractor or parts.

mike wrote on Thursday, July 20, 2000 (PDT):

Ihave 2 MH pony tractors. One is complete minus the engine. The other has everything but is taken apart.Ihave the fenders. Interested in selling complete tractor or parts.

Paolo wrote on Wednesday, July 19, 2000 (PDT):

Does anyone have a motor for my 1950 Pony?

Tim wrote on Sunday, July 16, 2000 (PDT):

Looking for left and right plows, disc harrow and snow plow for MH Pony. Have single plow and snow plow but I'm pretty sure I'm missing some of the parts.

Amy McPheters wrote on Sunday, July 09, 2000 (PDT):

I have what I thought was a Massey Pony. The serial number is 850046 I 4. There is another tag that has what appears to be E119 B. I would like to know what model I have. These numbers don't match the Pony numbers.

david wrote on Sunday, May 28, 2000 (PDT):

I HAVE RECENTLY BOUGHT A PONEY FOR 675 IT CAME WITH 3 ATATCHMENTS SPRING TOOTH SCRAPER AND PLOW I WAS WONDERING IF THAT WAS A GOOD DEAL OR NOT ? IF ANY ONE KNOWS ABOUT THIS PATICULAR ONE PLEASE LET ME KNOW PGA23251 THANKS

john ward wrote on Friday, May 26, 2000 (PDT):

I have a 1954 Pony, and need a hydraulic pump and the cap for the air cleaner stack. Any ideas?

Joe Giordano wrote on Tuesday, May 23, 2000 (PDT):

I just bought a Massey Pony and got a parts machine with it. No motor but does have some other good stuff, let me know what you need or would sell the whole parts machine.

Carl Kitchen wrote on Wednesday, May 17, 2000 (PDT):

I have a MH ferguson pony, I think this model was built for a period of time during 1954 and due to patent problems with ford they went back to MH pony Its for sale and will be at Florida Flywheelers Fort Mead on Nov 9-12 00

J. Terry Nabours wrote on Tuesday, May 09, 2000 (PDT):

Have a 1949 Massey-Harris Pony Tractor and am looking for a PTO attachment in order to install a rear mower, could use a cutter bar and attachment if necessary. Any ifo?

roy shepard , cape breton N.S. Canada wrote on Monday, May 08, 2000 (PDT):

I have a 1952 pony in good working order and I recently got a mower for it. I do not have the book and I am not sure how to hook it up. I would appreciate a copy of the instruction book

Paul Hodgson wrote on Tuesday, May 02, 2000 (PDT):

Can anyone suggest a place to buy an original style muffler for a 1951 Pony. Would greatly appreciate as using this tractor for a fund raiser and would like to keep as original as we can. Thanks!!!!!!!

Peter Lord wrote on Saturday, April 29, 2000 (PDT):

We have a Massy Harris Pony 1951,and are almost done restoring it all we need to find are the rear fenders to make our tractor complete. If anyone can help us please contact us.

Peter Lord wrote on Saturday, April 29, 2000 (PDT):

We have a Massy Harris Pony 1951,and are almost done restoring it all we need to find are the rear fenders to make our tractor complete. If anyone can help us please contact us.

Travis Prevost wrote on Friday, April 28, 2000 (PDT):

I recently got a pony at a on the 04-22-00 sale in New York for $900.

kelly wrote on Friday, April 28, 2000 (PDT):

if you stay in tractorshed.com select the tractor and then go to the bottom of the page and click on serial numbers and it will give you the date of mfg.

kelly wrote on Friday, April 28, 2000 (PDT):

if you stay in tractorshed.com select the tractor and then go to the bottom of the page and click on serial numbers and it will give you the date of mfg.

Ray wrote on Tuesday, April 25, 2000 (PDT):

I have a pony tractor I am restoring. The manufacturer's tag reads Massey-Harris-Ferguson serial# PGA-23598. I cannot find date of mfg. on either Massey-Harris or Ferguson web pages can anyone help?

John wrote on Sunday, April 23, 2000 (PDT):

I have a 1953 M H pony for sale includes sickle bar cutter,disc harrow, springtooth cultivater , plow and rear mount scraper all in good working condition. Phone me at 1 250 3384058 or email at jensen09 at hotmail.com

John wrote on Sunday, April 23, 2000 (PDT):

I have a 1953 M H pony for sale includes sickle bar cutter,disc harrow, springtooth cultivater , plow and rear mount scraper all in good working condition

Tom wrote on Tuesday, April 18, 2000 (PDT):

I have a 1953 MH Pony with hydraulics & belt pully for sale. Also includes manuals, sickle bar , cultivators and wheel weights. Needs carb work.

Bob wrote on Thursday, March 23, 2000 (PST):

I can't figure out why my M.H. Pony is so short. Are the rear wheels adjustable? Also like to know the year. No. PGA 1906A is the serial number.

Margaret Howden wrote on Friday, March 17, 2000 (PST):

Any CURRENT info on fair price for a Pony with "push blade", disc, "digger" (quack digger? rowcrop cultivator?), sickle mower, right and left hand 1 btm plows, in very good condition? Model and year not specified in ad; condition is seller's opinion ;-). Is there an illustrated guide to original Pony attachments? Saw what looked to be a 1-row corn planter, oddly mounted (on the side of the hood!) in the acrux.astro.indiana MH photo file on the web. But can't find detatiled info on attachments. Am hoping to find a reasonably priced Pony for market gardening, in good working order, not necessary to be in show condition (but wouldn't that be great?) Thanks.

charles wrote on Saturday, March 11, 2000 (PST):

i have 55 m.h. pony would like to know if there is some where to get parts for them

Gaston wrote on Wednesday, March 08, 2000 (PST):

We have 4 Original Pony's for sale, some with attachements along with a 5th one for parts. We are located in Winchester, Ontario, Canada. For more information, please E-Mail us.

Brett Christian wrote on Wednesday, March 01, 2000 (PST):

I have 2 ponys for sale located in Richmond VA. I have a dump load of attachments. One is in excellent condition the other needs work. Will be interested to hear what these 2 tractors will bring.

Ollie-- wrote on Tuesday, February 29, 2000 (PST):

I have a Massey Harris Pony For SaLe.I thank a 48 Model Has been restored complete.With Oreganal Pant and Decals All it likes is the side panals which cover the Battary compartment 2/29/00

tina wrote on Sunday, February 27, 2000 (PST):

Hi, does anyone know if a Ford 9N, Ferguson 30 and the M-H Pony are the same in size and performance and if not what is the difference? This is the first I have heard of the Pony and I want to buy a Ferguson comparable tractor.

Earl Taylor wrote on Sunday, February 27, 2000 (PST):

I have a Pony with the serial #PGA1174 .Any idea of the year?I was told it is a 1954.

Bob Shaw wrote on Saturday, February 12, 2000 (PST):

I have a M-H Pony, I am looking for a fix for the carburetor, a kit or a replacement. My Pony looks much shorter wheel base than the one in the picture provided on this site. Is there a reason? My tractor has a hydraulic front loader and a rear scraper but is not a three point hitch.

Craig Noble wrote on Wednesday, February 09, 2000 (PST):

I own a 1952 M-H Pony.I bought it as a basket case,put tractor together in winter.Rebuilt complete tractor from bushings to bearings.Rebuilt motor during winter,tore whole tractor back down beginning of summer.Painted tractor then put all back together.Tractor is know of expo quality.Ive lots of background with pony's now.Also have 7 other M-H's.

Claude Gagnier From Cumberland on. wrote on Sunday, February 06, 2000 (PST):

Gaetan J'ai un poney 1952 ser#PGA9223A si tu as besoin d'informations communique avec moi

Dave wrote on Sunday, February 06, 2000 (PST):

I have a 1949 Illustated Repair Parts List Manual for sale. E-mail me if interested.

Mattoso, Arnaldo wrote on Friday, February 04, 2000 (PST):

i own in brazil a pony Massey Harris from Canada and i wish a catalog ,

wayne miley sarahsville ohio wrote on Wednesday, February 02, 2000 (PST):

I'm looking for a head to fit massy harris pony 4 cylinder cont.If anyone has any info contact me.Thanks Also interested in whole tractor for parts....

tim schacht wrote on Monday, January 17, 2000 (PST):

need carb. for pmedina ohio

Rick Michaud wrote on Sunday, January 16, 2000 (PST):

Looking for side panels for MH Pony I am restoring. Please e-mail if you know of any for sale.

Rick Michaud wrote on Sunday, January 16, 2000 (PST):

Looking for side panels for MH Pony I am restoring. Please e-mail if you know of any for sale.

Tom Wellnitz Van Buren Ark. wrote on Sunday, January 09, 2000 (PST):

I have a M H pony for sale it needs a lot of work. I don't think I will ever get around to fixing it so make me an offer

Russ Ferretto wrote on Monday, December 27, 1999 (PST):

Iam looking for a Massey-Harris Pony. If you know where I can find one I would Like to hear from you. My # Is (775)771-7779

James Hamptonay wrote on Sunday, December 26, 1999 (PST):

i have a pony tractor and i tow hay wagons round the farm with my Dad when hes baling. My tractor used to be my brother Marks and we've had it for 10 years. I am 9 years old and my Dad has vintage tractors too

George Schichtel wrote on Friday, December 24, 1999 (PST):

I'm looking for a starter or rebuilt starter for a 1952 MH Pony. Also an instruction manual. Thanks

Gaetan Forcier wrote on Wednesday, December 22, 1999 (PST):

allo I want known the year of my pony if the number serial is PGS2850. Excuse my english because I speak english just a little bit Thank you

Gaetan Forcier wrote on Wednesday, December 22, 1999 (PST):

allo I want known the year of my pony if the number serial is PGS2850. Excuse my english because I speak english just a little bit Thank you

Don Concascia wrote on Tuesday, December 21, 1999 (PST):

I have a pony and am looking for a carb rebuild kit. Does anybody know where I can get one?

Jim wrote on Monday, November 29, 1999 (PST):

I just purchased a 1949 massey harris pony tractor. I am currently restoring it. does anyone know the origial color of this tractor? please send photo or just the color scheme..thanks.

tommy wrote on Wednesday, November 17, 1999 (PST):

i have found a pony for about $700.00,seems to run good.i am mostly into farmalls,is this a good deal and can garden tools still be found as i use my trk. for gardening. please advise.THANKS

Mark wrote on Thursday, November 11, 1999 (PST):

Does anyone out there have a cordwood saw that fits a pony in the Maine and New Hampshire area, for sale. I have a 1951 model, Im restoring and using. Thank you.

Bryan wrote on Wednesday, November 10, 1999 (PST):

Can anyone tell me what attachments are available either new or old for the pony tractor. If anyone has any available (except sicklebar, snowplow) please get in touch with me. Thanks

Jim Conibear wrote on Tuesday, November 09, 1999 (PST):

Have Pony in good operating condition. If I send the SN, can you tell me when it was manufactured?

Gaylene Anderson wrote on Saturday, November 06, 1999 (PST):

I live in New Zealand and would like to purchase a Massey Harris pony - is there anybody out there that can help.

Virgil Reeves wrote on Saturday, October 30, 1999 (PDT):

I have a Massey Harris Pony for sale In albany Ohio. It is a1948 model. It needs a few parts.

Fred wrote on Friday, October 29, 1999 (PDT):

I am looking for a Massey Harris pony tractor in Wisconsin/Michigan/Minnesota area.

C Edwards wrote on Saturday, October 23, 1999 (PDT):

Is the front hub of a Pacer and the Pony the same part?

Dave wrote on Monday, August 30, 1999 (PDT):

looking for proper paint color for 1948 massy harris pony tractor and wheels

Dan wrote on Wednesday, June 09, 1999 (PDT):

I was wondering about lites for a Pony and how to find a set?

SHOP FOR PARTS	SHOP FOR MANUALS

Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We've kept the same low rate for six years. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

Home | Forums

Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within these website pages are the property of their respective trademark holders. None of these trademark holders are affiliated with TractorShed.com, our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Antique Massey Harris Tractor: Massey-Harris Pony

Comments on this Tractor

Use This Form to Add Your Own Comments or Questions