PartsASAP LogoCompany Logo Tractor Shed Logo Parts for Old Tractors
Click Here or call 800-853-2651

Antique Ferguson Tractor: Ferguson TO-20

[Ferguson TO-20 Parts]     [Return to the Shed]

This picture is a 1948 model. The first TO-20 rolled off the production line in 1948 with Serial Number 1. It was an immediate success - they were reliable and priced competitively with Ford's new 8N. Due to their extreme reliability, many of the TE-20s were used in Antarctica by the British exploration program. Three of them (especially equipped) carried the famous Sir Edmund Hillary expedition on a 1,200 mile trip to the South Pole.

Ferguson TO-20 Tractor

Do you have any comments or questions about this tractor? Ever use one? Know anyone who owned one? If so, please join in on the discussion below. Use the form for entering your comments.

Comments on this Tractor

LuovuoNW wrote on Monday, July 11, 2022 (PDT):
  • Although it s easy to open to individuals on the internet, according to on the internet dating decorum, it s still vital to maintain the conversation ideal. There s no upside-down to greet as long as you unlock to a feedback. There s no better location to show who you are than on your profile. There are a lots of chances resting limited for you out there. While there might be pictures of you that look rather excellent, they might not really record that you are as an individual. This is the location you are going to base your norms for a remarkable associate. So don t stress and anxiety. If you re thoughtful, genuine, and make an effort, you re going to be fine. To Perform you like your man to produce you Once you re psychologically connected, he ll make plans to meet personally, but always terminates. Now despite the fact that by this point you would certainly have found out a bargain concerning the person, please remember to maintain your initial message succinct. Being a rather conservative individual, I constantly believe that it s harmful to find a companion online. Urmi Bhatt, that fulfilled her companion on Bumble during the lockdown in May 2020, explains that it can be difficult for ladies to discover depend on in the online space. It s a terrific way to locate a new enchanting companion. These kinds of guides supplies you tips on just how to establish a fantastic account, how to respond to negative point of views, as well as how to run the sites to look for a superb suit. We have excellent news for you if you re concerned that you don t have any kind of photos of on your own that rather fit the expense. There are heaps of rules, ideas, and things you have to know to be successful in the online dating globe. There are various totally free web dating websites as well as on-line areas, where you can satisfy possible presence partners. Some people are just too good to be true so watch out for this. None of us want to hear this, however it s true. Credibility matters from the outset since it s the very first step in structure depend on. Yet absolutely nothing beats listing building when it comes to long term value. Part of making your listing is specifying what you want. You do not intend to completely surprise someone when you see them face to face by not looking like yourself, however you do intend to place your ideal foot forward. Individuals like suitable individuals. Attempt to be special and avoid posing the design of various other individuals. Looking people eight years back. 5. What are you searching for When in a while to figure out individuals that are fascinated to know all the much more about you, it is useful on the off chance that you will certainly log in. Do not really feel dreadful on the off chance that you think that nobody needs to have date with you. On the off opportunity that you have all the guts of presenting on your own totally, you will certainly entice each searcher s heart. These are all important points that will certainly assist your pictures obtain the focus of remarkable women, also if you do not feel like you re extremely photogenic! These are based from the real to backgrounds of people that have gotten rewarding in scanning for their accomplices by methods of Internet. That indicates spending time on your account and also pictures. If you anticipate a man to be straightforward with you, whether it s by showing photos that accurately depict him or being actual in his profile, exactly how can you anticipate to get away with existing on your own It s just an initial meeting for you two make a decision if there is a stimulate worth going after, and also it is excellent not to obtain too hung up on a solitary day. There is no requirement for you to shroud your authentic identity on the premises that finally you will already be gotten with your own particular flaws. The moment choosing which will certainly website to collaborate with, it is necessary to look into the website and also inspect the internet dating suggestions as well as guidance that they can provide. Merely put on up your finest grin especially when you visit the Internet. An on-line net dating overview could likewise help you browse the on-line online dating procedure. Some individuals really feel that elderly dating internet sites call for a great deal of time commitment to the whole process of online dating. You will certainly be the person who will withstand the risk when the ideal time comes. At the same time undoubtedly, you won t see it at your very first look.
    Dick Atkins wrote on Thursday, August 01, 2013 (PDT):
  • Looking for the coupler from the crank pulley to the hydraulic pump. The coupler is threaded and takes a 1 inch shaft. It has four bolt pattern. Please respond to my email address dickatkins at
    Loree wrote on Wednesday, May 01, 2013 (PDT):
  • I have an old Ferguson TO-3551,that is in bad shape. What is the worth of this tractor
    Fred Gonzales wrote on Wednesday, March 13, 2013 (PDT):
  • I have a 1951 Ferguson to-20 and has been converted to 12 volt. I need a battery for it, does any one know what series battery fits it.
    floyd wrote on Monday, July 30, 2012 (PDT):
  • need break down of te 20 transmassion need front seal
    Paulette Fitzgerald wrote on Tuesday, May 15, 2012 (PDT):
  • Hello, we have a TEA 266270 Harry Fergussen about 1950. It was my brother in law s and he used it regularly up until a couple of years ago. Does anyone know what it would be worth We are looking to sell it. Thanks
    Frede Coburn wrote on Friday, April 20, 2012 (PDT):
  • I have a Harry Ferguson ser# To-136094 moter# Z129377217 What year is this tracto
    joe w carr wrote on Sunday, March 18, 2012 (PDT):
  • i have a 1948-1950 t020 ferguson. having trouble with it burning up alternaters. positve ground tracter
    dale wrote on Sunday, July 24, 2011 (PDT):
  • I have a to20 it has fire to points and coil but wont start because carb is sealed how can you tell if it is giving gas to engine thanks
    Hal Powell wrote on Saturday, March 27, 2010 (PDT):
  • I have a TO-30 with bad hydraulics bleeds off . I would like to know where to start to fix this.
    larry rye wrote on Wednesday, March 24, 2010 (PDT):
  • yes i have a 1956 to20 harry ferguson and i would like to no how much it is worth
    charles wrote on Wednesday, March 03, 2010 (PST):
  • i m looking at a ferguson and on the transmission it has HF TO-7006 can you tell me what year this is
    Larry J. Allison wrote on Friday, February 12, 2010 (PST):
  • I just purchased a Ferguson TO 30 and there is no serial # on dash. I was told it is a 1953 year model. All sheet medal is painted red except the grill and it is grey. The remaining is painted what looks like a Ford grey. Is there anyway I can tell if this is a 1953 and also can someone e-mail me a picture of correct color of the TO 30. Thanks For Any Help, Larry J. Allison
    Richard Beauchamp wrote on Sunday, January 17, 2010 (PST):
  • I just bought a fergerson 20 or 30 it has the narrow front tires 4.00x19 does anyone know where I can get new tires this size
    Patrick Horner wrote on Tuesday, November 24, 2009 (PST):
  • I have a TO30 with a z129 engine with cracks on top and on the bottom. Anyone have any suggestions as to where I might find a block Or, whether or not another MF engine will interchange
    lynn darbyshire wrote on Monday, November 02, 2009 (PST):
  • have a harry ferguson tractor serial #; to-35796 on dash which makes it a 1950 T0-20 but engine # is z129 - 353405, which makes it a T0-30
    Les Shollenberger wrote on Tuesday, October 13, 2009 (PDT):
  • I am looking at buying a TO30 that has a three speed auxillary transmission, in addition to the regular 4-speed. The lever is on the right side of the trans. case, just above the foot rest. I have never seen one of these before. Can anyone shed some light on this
    James Stephens wrote on Saturday, October 10, 2009 (PDT):
  • My father-in-law has a Ferguson TO20 and is trying to replace the cam shaft. Can anyone tell me where to get a good shop manual with instructions and diagrams of the Z-120 continental engine. He is an experienced mechanic but not with this tractor.
    Andrew Hull wrote on Saturday, July 18, 2009 (PDT):
  • I am trying to find a z120a engine or engine block mine has cracks inbetween all for cyl top and bottom resonable prices please houston tx
    Chris gunderman wrote on Monday, March 30, 2009 (PDT):
  • I just bought my to 20 and have no clue where the hydro fill is. I found the dip stick for it but no luck yet,,, help.
    Dale Frasca wrote on Sunday, December 21, 2008 (PST):
  • I have what I think is a to20. No tags on the cowl, no tags on the engine block. I do see casting # s on the transmission housing rear end . Please help. How do I determine what I have . Could it be a to 30 What year might she be ... Possible differences in body style to look for uummm anything might be helpfull....Thanks
    shayne anderson wrote on Tuesday, June 10, 2008 (PDT):
  • we have a TO-30 fergusen that has stayed in the family and has many hours on it. it still gets used today and i also tractor pull with it i am also looking for some fenders for it let me now if anybody has any
    Christine Evison wrote on Tuesday, June 10, 2008 (PDT):
  • I just bought my first tractor...1948 Ferguson TO 20 serial #1336. It had been owned by the same person for 21 years and is still running great. Cosmetics could use some help but it works!
    calvin collins wrote on Tuesday, March 04, 2008 (PST):
  • hello, i just bought a h ferguson, but i dont know what year it is. the sn is TO777351, can some one help me
    calvin collins wrote on Tuesday, March 04, 2008 (PST):
  • hello, i just bought a h ferguson, but i dont know what year it is. the sn is TO777351, can some one help me
    calvin collins wrote on Tuesday, March 04, 2008 (PST):
  • hello, i just bought a h ferguson, but i dont know what year it is. the sn is TO777351, can some one help me
    Steve Shimanek wrote on Thursday, October 18, 2007 (PDT):
  • Have Fergusen 12 plow looking for two new plow points. #point 2 bottem Model 12-AO-28 NO.41043. Looking for any information Thanks
    John Shannon wrote on Tuesday, July 03, 2007 (PDT):
  • I have a 51 Ferguson TO-20 that I want to repaint, but am having trouble finding the original paint. Would appreciate any help. John
    Jack Franz wrote on Monday, May 07, 2007 (PDT):
  • I have a 1950 TO30 ferguson that still runs great except for a slight hydraulic problem. The lift to the up position responds well but it does not hold at lower positions for plowing, grading, etc.. Any suggestions
    Keith wrote on Friday, April 27, 2007 (PDT):
  • I just bought an old ferguson and I really dont know if its a TO 20 or a TE 20.Was wondering if theres a way to tell them apart,im not really up to date on ferguson s and would like to find out before i start trying to refurbish the tractor.....Thanks...Keith
    larry kris wrote on Monday, March 12, 2007 (PST):
  • hello.i am restoring a ferguson TO30 have a shop manuel but it dosent tell what wt.oil is used in the transmission or rear end,and 3 point.can any one help please.thanks larry
    Eugene S. wrote on Saturday, November 11, 2006 (PST):
  • wrote on saturday,nov. 11,06, Ihave a 1950 To-20 all red why are so many listed all painted gray. I plan to repaint mine red.
    larry krise wrote on Monday, November 06, 2006 (PST):
  • hello. im restoring a ferg.30 how do i tell what is? any help i would be thankful. larry krise in INDIANA
    John H. wrote on Tuesday, October 17, 2006 (PDT):
  • Needing both lift arms, stabilizers and pins for a T-O 20
    Anne Coish wrote on Saturday, October 07, 2006 (PDT):
  • I am wondering what year our tractor is? Serial number is TE 88205
    kevin rinkes wrote on Saturday, October 07, 2006 (PDT):
  • i have a 1952 to30--with nothing attatched 3 point raises--but will not lift brush hog--any thoughts firstumc at
    edward j holierhoek wrote on Monday, July 31, 2006 (PDT):
  • I have a TO35 with a weak lift the longer you use it the weaker it gets. I think its the lift cylinder needs rebuilding I have a rebuild kit for the pump and a new pressure relife valve can any one tell me what parts i need for the lift cylinder and lift arm bushings?
    J. Paul Holmes wrote on Friday, July 28, 2006 (PDT):
  • I have a TO20 Ferguson tractor. I am in need of getting the governor operating correctly. If you have any pointers let me know. Also I have a spare tractor for parts. I would be willing to sell parts if you need them.
    Jay wrote on Sunday, May 07, 2006 (PDT):
  • I just purchased a TE 20 and was going to change plugs. The old plugs are Blue Crown M5PR and no dealer can line up with any other plugs ,, someone please help.
    Jay wrote on Sunday, May 07, 2006 (PDT):
  • I just purchased a TE 20 and was going to change plugs. The old plugs are Blue Crown M5PR and no dealer can line up with any other plugs ,, someone please help.
    Jay wrote on Sunday, May 07, 2006 (PDT):
  • I just purchased a TE 20 and was going to change plugs. The old plugs are Blue Crown M5PR and no dealer can line up with any other plugs ,, someone please help.
    Larry Kupferschmid wrote on Tuesday, April 11, 2006 (PDT):
  • I have a TO20 (1949?) with an internal oil filter. The oil pan access cover leaks badly. I read where this is common. Is there an easy fix for this and where can I purchase a new gasket for the access cover? Thanks.
    Glen wrote on Saturday, February 18, 2006 (PST):
  • I want to know the original paint code for Ferguson tractors.
    Bob Harding wrote on Wednesday, February 15, 2006 (PST):
  • To Sue, You can look on the lft side of the motor just aboe the oil pan and it will have a cast number of Z120 for a TO20 and No. Z129 for TO30. If the oil filter is inside the oilpan it a TO20. There should be a tag next to the steering post with a TO ser. no. If tou find all of these check w/ as they handle the continnal motors for Ferguson. Good luck. Bob
    Sue wrote on Monday, February 06, 2006 (PST):
  • Help please! We keep getting different opinons on what our tractor is. Some say it is a T0-30, some say it is a T0-20. How do we tell the difference? It has an internal oil filter if that helps and there are numbers all over the darn thing. Which ones tell the year and model? It is 6 volt and cranks over slow and has very weak spark. Are the valves adjustable on it and does anyone know what they should be set at? Going to put a coil and new battery in it this weekend. Links would be great! Thx
    mike dudley wrote on Sunday, December 18, 2005 (PST):
  • I have a 1949 to20 that i am fixing up for everyday use recking hay it is just the thing for it.
    Peter Herring wrote on Friday, December 02, 2005 (PST):
  • I have just bought a non runner 1955 TED Petrol/TVO Ferguson. It doesn't have a key to start, I believe it is started via the gearstick. Is anyone out there able to let me know the full starting procedure from the beginning as I am a novice Many thanks Peter
    Carl Schmidt wrote on Friday, November 18, 2005 (PST):
  • I'm seeking information on what type of transmission and hydraulic oils to use in my TO20 Ferguson Tractor. I don't have a manual to refer to. Your advice is appreciated!
    Daniel Oakes wrote on Monday, October 24, 2005 (PDT):
  • I think I have a tractor like this but I cant find the serial number anywere on the web it is TO58467
    william kettleborough wrote on Friday, October 07, 2005 (PDT):
  • One of the hydraulic clutch packs must be faultily connected, or maybe even Not connecte, but you may have to split the tractor in halve to nget to it, so seek proffesional advice>
    Bubba wrote on Tuesday, October 04, 2005 (PDT):
  • Just bought a 1948 TE-20 Ferguson. Hydraulics leak down when you mash clutch. Any help will be thankful. Bubba in Ala.
    Philip wrote on Friday, June 17, 2005 (PDT):
  • I have a Ferguson SN T0-56903. Can anyone help me with the model and year? What is the value of a complete running tractor (not restored).??
    Donnie Jones wrote on Monday, May 16, 2005 (PDT):
  • I am looking for a good used block for a to 20 any help would be appreciated
    OSORIO DE CASTRO NETO wrote on Sunday, May 15, 2005 (PDT):
  • Comprei um trator HARRY FERGUSON TO 59544 USA,esta em perfeitas codiçoes,gostaria de saber o ano de fabricaçao,obrigado.
    george schuler wrote on Monday, May 02, 2005 (PDT):
  • Oops! Maybe I wrote too soon. From what I have been reading on the web, tractor must be a TE20 in stead of a TO20, as I recall reading somewhere on the tractor that it was made in Coventry England. Is that correct? Thanks, George
    george schuler wrote on Monday, May 02, 2005 (PDT):
  • I have the opportunity to buy back my deceased Dad's Ferguson. I remember it being delivered new around 1950 +/- 2 years. Have been told it is a TO20. How can I tell for sure what year and model? Thanks, George
    dean daudt wrote on Tuesday, March 29, 2005 (PST):
  • I need instructions on how to replace outer oil seals on rear axle & how to disassemble. Is it included in any service manuals? Thank you
    Mike Trudel wrote on Monday, March 28, 2005 (PST):
  • i just purchased a 1948 TO-20 and it has lift problems im told were can I get a manual and parts for one of these old work horses id like to restore it! any help would be great!
    JOHN PETESEN wrote on Sunday, March 27, 2005 (PST):
    Jim Williamson wrote on Saturday, March 19, 2005 (PST):
  • About 1950 we had a Ferguson model 20-85 and it had a loader LUO with manure forks it had arms that lvered on brackets where fenders mount. It had a bracket that fit on rear 3 point hitch arms with a pintle hook. The manure spreader was Ferguson too and had a pintle hook hole. The loader was quite light but very, very efficient. could unhook by lowering hydraulics and just drive ahead , load in a couple of minutes and backup to spreaderand hook up again without leaving the seat. You could take the loader off in minutes just leaving the main brackets.
    phil kleckner wrote on Monday, February 21, 2005 (PST):
  • How can you tell the difference between To-20, and a Te-20, other than serial numbers, also does anyone know where i can find a 12volt conversion kit to fit a To-20 tractor.
    Jim Underwood..... M and J Farm wrote on Friday, January 14, 2005 (PST):
  • T.O.20...oil filter is in oil pan ..T.O. 30 filter is on side of engine...I need grille for 20..i restore and repair all makes of early model tractors..Call or e mail . I buy and sell used parts
    RICK KITTLE wrote on Wednesday, January 12, 2005 (PST):
    JEROME ADAMS wrote on Saturday, December 18, 2004 (PST):
    ken wrote on Wednesday, December 01, 2004 (PST):
  • Need rear wheel rim 10x28 for a 1949 Ferguson. Can you help?
    Dan Whiteley wrote on Wednesday, November 24, 2004 (PST):
  • I have been looking for a Engine block for my TO20 it has the contenial Z120 appreciate any help Thank-you
    Darrell Freeman wrote on Sunday, October 17, 2004 (PDT):
  • My uncle and I have started the old TO-20 I am trying to figureout how the pto attaches to the cutting deck the shaft on the deck is splined the TO-20 is square. .if you can help just email thanks Darrell.
    Charles wrote on Tuesday, September 14, 2004 (PDT):
  • I have TO-20 possibly model 5360. I need the back housing that goes around the PTO and the PTO rod that goes into the back end of the tractor. If someone has one please notify me by email or give me a call at 870-536-4258. Thanks.
    Dana wrote on Saturday, September 11, 2004 (PDT):
  • need a video or step by step manual on how to disassemble and assemble complete motor for beginner
    Beth johnson wrote on Wednesday, September 01, 2004 (PDT):
  • I just bought what I believe is a 1950 Ferfuson TO-20, serial number 28339. I thought all Fergie's are grey, however, this tractor is primarily red, but does not appear to be repainted - the red might be the original color. Is this possible or am I all wet and the tractor was repainted?
    David wrote on Saturday, August 21, 2004 (PDT):
  • I have a 53 TO-30 with a cracked block. Need a rebuildable
    Ray Gabiola wrote on Sunday, August 08, 2004 (PDT):
  • I just bought a 49 Ferguson TO20 and was wondering what the HP rating is.
    Eugene Wilde wrote on Saturday, June 05, 2004 (PDT):
  • I have bought a Harry Ferguson.I believe it's a TO-20(1949). The serial number is 1815,I believe.It has been converted to a 12v.system ,starter switch added.What color is it suppose to be?I've ordered a service manual for it.Until then does anyone know what oil and fluids it uses?
    Doug wrote on Thursday, April 22, 2004 (PDT):
  • I have a 1956 TO-30 that i picked up last fall. My Dad has a late 40's Ford 8n, and so far, my "Ferg" has out performed the 8n in almost every respect. Especaily when it came to the ice cold Upper Michigan winter starting. thanks for making such a damn reliable, solid tractor!
    Mark Shelton wrote on Tuesday, April 20, 2004 (PDT):
  • I have a 1959 Harry Ferguson TO-30 serial number TO3551. I use it to mow my yard a run a 62" rear tyne tiller. It work great but would till better if there was a low transfer. Does anyone know if a low transfer can be put on it and how much trouble will it be? Also, if any one knows where I can get an owners manual I would really like to get one.
    Kathleen Gaisler wrote on Monday, April 12, 2004 (PDT):
  • We're selling a Ferguson T0-20 this weekend at our family's auction in Newville, PA - runs great - e-mail if interested in coming to the sale.
    Bill Hoffman wrote on Friday, April 09, 2004 (PDT):
  • I am thinking about buying a to-30 from a fellow down the road from me.What worries me about the tractor is that it uses 1 to 2 quarts of hydraulic fluid everytime he runs it.How difficult is this problem to fix? Please let me know as I am a rookie and clueless.
    VINCENT SHELLEY wrote on Wednesday, March 24, 2004 (PST):
  • i have a TO 20 in good order how much is it worth i wish sell it
    Henry wrote on Wednesday, January 28, 2004 (PST):
  • Looking for a used starter for a Harry Fergerson Gas engine. Please email the price if any one has one.
    Jim wrote on Sunday, January 25, 2004 (PST):
  • I am looking for a wiring diagram for a 51' T0-20, 12 volt. Can anyone out there, help?
    Jack wrote on Saturday, January 24, 2004 (PST):
  • I've been looking at a TO20 (1950) to buy. What is a standard price range for something this old.
    peter wrote on Monday, December 01, 2003 (PST):
  • i bought a te20 the manifold is broken it has a updraft zenith on it if anyone has one at areasonable price please contact me
    steven bilby wrote on Friday, November 21, 2003 (PST):
  • I own a 1952 TO-30 and would like to add lights on bonnet as well as rear skirt fender any ideas? I would need complete lights with mounts etc. If you can be of any assistance please Email me. Thank you
    Ralph Moore wrote on Monday, November 10, 2003 (PST):
  • I have a ferguson tractor TO-30 with a cracked block numbered Z129. I have found a good block with number Z134 marked on side. Is this block a replacement for my old Z129 block? Thanks, R. Moore
    Gary Brady wrote on Sunday, October 12, 2003 (PDT):
  • I bought a 1951 TO-20 thru Ebay in Sept. of this year. Since then, I have purchased many parts thru ebay. I have had good luck with finding and buying parts. I would like to know if anyone knows the original paint color codes for the Ferguson TO-20 tractor. Thaks
    Steve wrote on Saturday, September 27, 2003 (PDT):
  • I own a TO-30 and a Sauder Loader (currently not attached). It escapes me as to best way to achieve live hydraulics on these older TO's. I have a splined coupling welded to the water pump pulley from previous owner, to which a front mount pump connects, after trashing the front grill of course. Reservoir was a tank bolted to the fender. Since so many of you have loaders, someone must have live hydraulics? Please help, Thanks,
    Patrick J Mc Caffrey wrote on Monday, September 22, 2003 (PDT):
  • looking for brake shoes and fittings for to 20. also good or new distributor.
    Mark McMichael wrote on Saturday, September 20, 2003 (PDT):
  • I have a really great 52 TO 20 with a Freeman Loader on the front. The front works fine and I use it daily. The 3 point hitch, however, is raised and won't go down. I am convince it has to be something simple but still can't get it down. Can someone suggest a remedy?
    Jim Peter wrote on Friday, September 19, 2003 (PDT):
  • Looking for the Ferguson decal design from 1948 to 1954,,for a grey Ferguson tractor..Thank you Jim,,Extreme graphix.
    Eric Lacey wrote on Tuesday, September 09, 2003 (PDT):
  • Have been looking in the Uk for a reduction gear box for a fergie TED20, without success. Has anyone got one for sale. A Howard box is prefered but would consider a sherman or other. I want to slow the speed of my tractor down for hedge cutting.
    Will Thompson wrote on Thursday, September 04, 2003 (PDT):
  • Looking for a grill for a TO-30 and a decent front end loader. Madison, Wisconsin.
    Terence Murphy wrote on Friday, August 29, 2003 (PDT):
  • Where is the kill switch located on the to-20?
    Davis Conway wrote on Wednesday, July 16, 2003 (PDT):
  • I have a 1954 TO-30, motor week runs good no knocks, body rough. Anyone interested in buying it?
    Frank LaRoche wrote on Saturday, June 21, 2003 (PDT):
  • is a good place to find just about any part for any tractor.They will do you right
    TOM SMITH wrote on Thursday, June 05, 2003 (PDT):
  • We have a Ferguson that we thought was a TO-30. As i was checking into it i found out it was a TO-20, from the serial number on the motor, Z129. The tag number on the steering column is TO 64598. Is anyone able to tell me what year it is or how to find the year?
    TC wrote on Sunday, May 18, 2003 (PDT):
  • I wish it was possible to see answers to all the comments; that would be quite helpful. The serial # list does not contain mine; TO-4012-A. I would like to figure out the yr model. I would like to know whether it is difficult to find parts for these tractors. Also, if someone would post answers to the most common questions (like where to find parts & manuals) would be helpful- I need this information just like the 50 before me! Thanks!
    Roger Shingleton wrote on Sunday, May 11, 2003 (PDT):
  • Bought a Ferguson Tractor. The number on the left side of the block is; Z120A-600. Was told this was a TO-20, 1950 year modle. I ordered that book for it but the book says that this 1950 TO-20 is suspose to have a 6 volt system with a generator. Mine has a alternator and is 12 volts. Did Ferguson built a 12 volt system?(Ferguson, not Massey ferguson) Could this tractor have been changed over to a 12 volt system are is my tractor not a 1950, TO-20. Any help would be appreciated.
    J. M. Wilson wrote on Thursday, May 08, 2003 (PDT):
  • I just finished restoring a 1950 Fergerson TO 20. It belonged to my uncle who was a peanut farmer. He farmed with this tractor about 30 years. The tractor is in excelent condition, the tractor had no rust or holes. The tractor is also very strait.
    Charlene Bomer wrote on Thursday, April 24, 2003 (PDT):
  • Selling the Ranch. Have 1948 TO20 Tractor--runs but needs TLC on Paint and tires. Most parts original. Selling for $1800.00
    shane harigel wrote on Friday, April 11, 2003 (PDT):
  • need a hood a for TO20 any body got one
    Rick Collin wrote on Tuesday, March 18, 2003 (PST):
  • I'm looking for R/L side hood name plates 1950 TO-20. I would appreciate any help. I've completed a total restore these are my last quest. Thanks. rpcollin at Glendale,AZ
    leandro zembo wrote on Monday, March 10, 2003 (PST):
  • Hola muchachos, soy de Argentina , y les cuento que tengo un Ferguson 1949 en muy buen estado. Pero tengo un problema con el sistema hidraulico y me gustaria saber si me pueden mandar por mail el despiece de la parte hidraulica y tambien quiero saber la potencia (hp) del motor original de gasolina. Muchas gracias, Leandro La Plata-Argentina
    Jerry wrote on Wednesday, March 05, 2003 (PST):
  • I have a TO-20 that I purchased 34 years ago. I also have 11 other restored tractors. If I had to get rid of all but one I would the fergie.
    ray.morey at wrote on Monday, February 10, 2003 (PST):
  • to you guys out there.T.O. means Tractor Overseas and T.E. is Tractor England. The T.O. had a Z120 continental engine and TE a Standard Vanguard. Get a book Motors Truck and Tractor Repair Manual 1935/53, it has all the info. raymond..
    hd5b wrote on Monday, February 10, 2003 (PST):
  • to ERH40 that sounds like the diverter valve control. it takes the oil from the T.P.L. and sends it to your other attachments [ f.e.l. ] or whatever.
    Farmer Ron wrote on Thursday, January 30, 2003 (PST):
  • Thanks for creating a great tractor Harry. Our farm has a 51 TO-20. We use it for mowing, plowing, pulling the hay wagon, hauling logs out of the woods and general mayhem. If and when it finally dies I'll be sad but I'll definately try to find another one just like it.
    RON HOLMES wrote on Wednesday, January 29, 2003 (PST):
    Todd Edgerton wrote on Friday, January 24, 2003 (PST):
  • can reproduce sets of ferguson side emblems from fiberglass. can paint them or you can. blue background and "chrome" letters and border. look good,most will never notice. see a lot of these missing on fergies.
    mike wrote on Thursday, January 23, 2003 (PST):
  • i am looking for a stater housing for "to-20
    rodger walker wrote on Wednesday, November 20, 2002 (PST):
    elizabeth webb wrote on Sunday, November 03, 2002 (PST):
  • I need to know the original color of a 1950 TO20 tractor was painted.
    Frank LaRoche wrote on Monday, October 28, 2002 (PST):
  • I have Ferguson with a serial #113365 can anyone tell me the model and year built.Thanks
    R. A. Hale wrote on Thursday, September 05, 2002 (PDT):
  • I purchased a 1950 TO-20 in the spring of this year. Ihave used it to raise 1/2 acre veg. garden and have raised tobacco crop this year. It runs and works great. It was partially restored but the name plates for the side of the hood are missing. I checked with the local Massey dealer and they have a Part number but it is no longer available. Any info on where to order restoration parts would be greatly apprecated Thanks, Rob S.E. Ky.
    Scott Jernigan wrote on Sunday, June 23, 2002 (PDT):
  • My father purchased a TO-30 in 1951, and a used 1950 TO-20 the same year. Both are still running great and I use them mostly for my gardening. They both have been rebuilt, but the hyd. are original and still work amazingly well. I also have two six foot Ferguson disc harrows, two 2 bottom turn plows by Ferguson, and though in bad condition in the woods, a Ferguson single row ear-type corn picker. Would be glad to hear from any other Ferguson owners worldwide. These pieces of equip. have a great functional and sentimental value to me as I grew up on the small famile farm using them. Thanks, Scott Jernigan...Windsor, N.C., USA.
    Al Rogers wrote on Monday, June 17, 2002 (PDT):
  • Great photo and website. I have just aquired a Fergie which I think is a TO-20 or a To-30. I am sure if I locate the serial number this will solve my problem. I you could let me know where it is located I would really appreciate it. It appears as if it did have head lights and tail lights. This may help too. I can send photos if this would help. Al Rogers, "Chicapee" South Africa. S33deg 58' E23deg29'
    Al Rogers wrote on Monday, June 17, 2002 (PDT):
  • Great photo and website. I have just aquired a Fergie which I think is a TO-20 or a To-30. I am sure if I locate the serial number this will solve my problem. I you could let me know where it is located I would really appreciate it. It appears as if it did have head lights and tail lights. This may help too. I can send photos if this would help. Al Rogers, "Chicapee" South Africa. S33deg 58' E23deg29'
    Mike wrote on Friday, May 03, 2002 (PDT):
  • I have the opportunity to buy a TO-20. Is the hydraulic system on these the same as a Ford N. Do they have position control for the 3 point or is it just up and all the way down?Thanks
    Gene Gurley wrote on Saturday, April 13, 2002 (PDT):
  • I have a 1949 Ferguson that is in working condition. The serial # is TO 7006 and the engine # Z120A600. My father purchased this tractor from a tobacco farmer in KY. The tractor appears to have the original paint. I also have a two bottom plow, six foot blade and disc that came with the tractor. I would sell this complete set for a reasonable price. I am located in Southern Illinois.
    Carlous King wrote on Tuesday, March 26, 2002 (PST):
  • Saturday march, 23. I was out searching the country side for a good used tractor and came across one at a bargain so I purchased it on the spot. Did not know much about it except it ran and it was a Ferguson. To my suprise after searching the web pages, I'm a proud owner of a 1950, TO 20 Ferguson s/n-17446. I would like to know if anyone has had any dealings with one that has been changed over to LP gas? I have consider changing it back to it's original state but was advised not too. Does anyone know if changing it back to gas will hurt my fregie? And like many others does anyone know were I can find a manual?
    John Cunningham wrote on Sunday, February 10, 2002 (PST):
  • I think these Fergusons were the best tractors every built!My dad farmed 400 acres in 1967 with his TO-30. I own a TO-30 and am restoring a TO 20. I need Mad money for my hit and miss habit so To-20 will be up for sale this spring. Remember to change the oil in the rear end it takes 6 gal 80-90 wt oil. A lot of dirt and water build up here!
    Ben Hogue wrote on Tuesday, January 29, 2002 (PST):
  • I've got a '52 TO-30 (#99198) on my place outside of Austin. I love it. It runs pretty good, but I suddenly developed a problem with the lift not lifting. Actually, it lifts sometimes. Anyway, with the help of discussions here, I think I can probably figure it out. (How come so many folks ask about models and serial numbers when the information is right here?) I've also got a running 9N for sale...
    Keith Boesel wrote on Monday, January 21, 2002 (PST):
  • I recently purchased a Ferguson 2 bottom plow and in process of rebuilding it. I am looking for the color scheme for this unit. I have heard different stories, one it should be red with the plow blades gray, some say all red and some say all gray. Can anyone help?? Thanks
    bill lewis wrote on Thursday, January 10, 2002 (PST):
  • 6 mounthsago i bought a fergie it was preet well cobbed the right side rear tire hub assem etc was off a ford 9n and has no tage on it to tel what year model etc ive called a few trac shops and discribed it they all say its a te20 becouse of the lucus ingnition but when i blew a water pump and ordered a new one it ws wrong when we ordered it from the casting number off the old water pump it still was wrong the water pump i need is triangle in casting shape and the bolt holes for the fan are kind of off set 2 really close 2 rather farther apart the person i bought the tractor from says the engine is a triumph but all the trac dealers says its gotta be a contanetal please help i love my little trac and would love to hear it purrring againe
    Tom Littlefield wrote on Monday, September 17, 2001 (PDT):
  • I wan't to buy a grill for a Ferguson TO-20 or TO-30. Will pay top dollar for a vety good one. Please email me if you have one for sale. Thanks!
    Russ Conn wrote on Wednesday, September 12, 2001 (PDT):
  • My dad bought a To-20 in 1950 and I have it now. It still runs great and even though it was used hard through the years, it has only been overhauled once in 1964. In response to Ark's questions, I converted mine to 12v about 10 years ago. I used a 12v Ford car generator, but if you use an alternator, use a small one off a 4 cyl. as a big one will drag the tractor's engine down. I kept the 6v starter and the and the fast spinning starts the tractor so fast that it hasn't burnt out in all these years. I will eventually have to have it rewired to 12v. As far as your coil is concerned, it's ok. You'll have to pick up a ballast resistor at your local parts store. As it is a generic type item, it costs less than $10 usually.
    Joe Monaco wrote on Friday, August 24, 2001 (PDT):
  • Any one out there know of sheetmetal, especially hood for 1957 F-40?
    Darren layne wrote on Sunday, August 12, 2001 (PDT):
  • Ifound a feruson early 50,s good body parts&rear needs engine it has ben in a shed for 20 years what engine will fit this trackter like from a 8n or9n will they enter change please help e mail me thanks
    Ark Pisarevsky wrote on Thursday, August 09, 2001 (PDT):
  • I just bought a Ferguson TO-20 Tractor. This is the first tractor I ever owned. It is difficult to start and I am considering 12 volt conversion. Has anybody done this ? I think a different alternator and coil will be required. Is there anything else ? Also, any do's and dont's with it or any tractor in general. Thank you for your help, Ark.
    Ed Reitler wrote on Tuesday, August 07, 2001 (PDT):
  • I am the proud owner of a TO-30 Harry Ferguson. The hydraulics on the old girl could not lift the implements and when they did lift it would bleed off very quickly. A friend and I tore the hydraulics out and had everything repaired. However, the machinist who repaired all the parts said that there is a schematic of the "proper putting back together sequence" or else things will break again. I have looked through my service manual and found no such schematic. Can anyone help?
    April Martin wrote on Friday, August 03, 2001 (PDT):
  • My husband and I purchased a TO-20 recently. We are experiencing problems with lifting our tiller and blade - we thought it was a broken valve - we fixed that, but continue to have the problem. We are able to lower, but cannot lift. Any advise or suggestions would be appreciated. Thanks.
    George Allegri wrote on Sunday, July 29, 2001 (PDT):
  • A friend of mine is restoring a Ferguson. The Serial no. is S 114219 F. TO-20. He would like to know the exact year when this model was built.
    Ernest Love wrote on Sunday, July 22, 2001 (PDT):
  • I am in the process of restoring a Ferguson, I am not sure of the year or model. I am in the Dallas FT. Worth Area.
    Marvin Simonson HC 87 Box 7 Sumpter Or 97877 wrote on Monday, May 14, 2001 (PDT):
  • I have a 1954 TO 30 Harry Feguson tractor for sale. It was overhauled recently and runs good. Has a front blade and other attachments. I also have the original manuel. The front part of the hood is missing and the grill has been altered to alllow the cylinder for the blade to work. This could be easily restored. Set od snow chains too.
    MATT CALVERY wrote on Tuesday, April 17, 2001 (PDT):
    MATT CALVERY wrote on Tuesday, April 17, 2001 (PDT):
    Earl W. Lowe wrote on Sunday, March 25, 2001 (PST):
  • I just purchased a Ferguson I think it is about a 1953. How do I tell if it is a TO-20 or a TO-30? (HELP)
    Denny Odle wrote on Monday, December 04, 2000 (PST):
  • My grandfather passed away on November 29th 2000.He had a t-30 in the barn that runs and works well but is in need of restoration.Can anyone put me on the right track as far as what to do for parts as this will be a project that my dad and I will enjoy
    Henry Hanson wrote on Sunday, October 29, 2000 (PST):
  • I just purchased a 1952 To-30. Thanks to this web site I was able to figure out what year it was built, Thank you all. I learned how to drive a tractor when I was 11 years old. My Grandpa tought me. He had a Ford 8N. Since then I have wanted either a Ford or a Ferguson. I found this Ferguson to-30. Since then my son has been on it none stop making trails and dragging trees. It sure beets having him skating boarding and getting into trouble, if you know what I mean. I once red a saying on a sign on a farmers lawn "The outside of a horse, is good for the inside of a man", the same is true for a tractor.
    Mark Jackson wrote on Monday, October 23, 2000 (PDT):
  • I am an Ag-Science teacher in Milford, Texas. We recently recieved a Ferguson tractor for my Ag Power and Machinery class to work on. The Serial Number on the tractor TO-15098 Does anyone know anything about this tractor? Is this a TO-20 ? THe tractor seems to be in decent shape and we are Planning on restoring it if we can find the manuals and parts we need. Please E-mail any help you can give.
    Joseph McGovern wrote on Sunday, September 03, 2000 (PDT):
  • I have a Harry Ferguson Tractor with a Pippin backhoe and a Lord front loader. The Tractor serial# is TO-130561 and i am looking for any info i can get. I also need an exhaust manifold for the Continental Motor it has in it. Thank you for your help.
    Tom Shappell wrote on Thursday, August 24, 2000 (PDT):
  • Hello to all of you! I am brand new to this antique tractor hobby, as I have just inherited my father's 'Ferguson TO series'. Ser # 45510, my dad has used this tractor for 32 years strictly for side-bar mowing, and it is all original. Oil pressure drops to red zone after a bit, and I need to know if this requires a total overhaul. I am located in Berks Co., PA, and would be happy to hear from someone as to where I may take my Fergy for service. Also, I need an operators manual! Any and all help would be greatly appreciated! Thankyou.
    Ernest L. Hagberg wrote on Saturday, August 05, 2000 (PDT):
  • To Mr. Franceschini. My TO20 hydraulic system was slow and wouldn't hold until I put a new relief valve in the pump.
    pierre charest wrote on Saturday, August 05, 2000 (PDT):
  • 'aimerais recevoir une copie du manuel de ce tracteur
    Mike Ring wrote on Friday, July 28, 2000 (PDT):
  • Just got a 1950 TO-30, serial# TO-34408. Its in very good condition,complete except for exhaust system. This was my father-in-laws tractor for the last thirty years. I live in Palm Springs Ca., current temp 118*.
    Mike Ring wrote on Friday, July 28, 2000 (PDT):
  • Just got a 1950 TO-30, serial# TO-34408. Its in very good condition,complete except for exhaust system. This was my father-in-laws tractor for the last thirty years. I live in Palm Springs Ca., current temp 118*.
    Fred Martin Greenfield, OH wrote on Monday, July 24, 2000 (PDT):
  • I have a 1950 TO-20 that has the zero ground off where Z120 is cast in the side of the block. Down and to the right is stamped Z129. Anyone know of any rebuilders doing this?
    James Ingram wrote on Monday, July 24, 2000 (PDT):
  • I have a friend who is looking for a service manual for a TO-20. Anyone?
    Jeffery D. Johnson wrote on Saturday, July 22, 2000 (PDT):
  • I have a TO-20 SER.# 418 ,believed to be a 1948. Looking for a BUCKET and LOADER for it.
    Albert Hayworth wrote on Saturday, July 22, 2000 (PDT):
  • I wrote that i have a 1950 tractor,Idid some research and foundout i have a 1948 Harry Ferguson mistake.
    Albert Hayworth wrote on Saturday, July 22, 2000 (PDT):
  • I wrote that i have a 1950 tractor,Idid some research and foundout i have a 1948 Harry Ferguson mistake.
    Albert Hayworth wrote on Saturday, July 22, 2000 (PDT):
  • I just purchased a 1950 seri.#TE-25749 this year and i am proud to own one. I have 5 acres and the little tractor is perfect.Whin i purchased the tractor,it has set for 6 mo.we put in a hot battery and belive it or not the thierd crank it fired right up,and still starts on the first cranck.I am verry pleased with my new toy.
    GDJ wrote on Saturday, July 15, 2000 (PDT):
  • TO;ERH40 I have a 1950 TO30. On mine a have a lever that sounds like what you just mentioned, mine controls the up and down movement for my front end bucket. It's kind of like a back hoe bucket except it has a manual tilting bucket. and hydraulic's for the raising and lowering of the front bucket... Hope this helps you. If you have a picture of it I would love to see it. thanks GDJ
    terry knaus wrote on Monday, July 03, 2000 (PDT):
  • ive reciently bought a to20,1949 model i believe and after i got it home it started knocking,it sounds like a main bearing,what i really need are the tourque specs for the rods and mains,thank you please e-mail me with sugestions thank you
    PHIL wrote on Monday, May 08, 2000 (PDT):
  • The serial plate above the steering wheel is missing on my TO-20. The serial # on the engine block is 101321. Does anyone know how to relate the engine serial # to the year the tractor was built?
    ERH40 wrote on Saturday, April 01, 2000 (PST):
    ERH40 wrote on Saturday, April 01, 2000 (PST):
    kpowers wrote on Thursday, March 16, 2000 (PST):
  • need specifications for t020 and to30 -must identify my tractor and cannot locate serial number. Anyone have specs or a good diagram that would show difference between two models? Help-need answer fast!!
    ron ogan wrote on Friday, March 10, 2000 (PST):
  • the TO-30 was not built until about 1951.
    Anthony Franceschini wrote on Friday, February 18, 2000 (PST):
  • I have a TO-20 which I just purchased. The three-point hitch raises very very slow. Does anybody know if this is correct or is there an adjustment to make. Please e-mail any comments you may have.
    Curt Watson wrote on Monday, January 31, 2000 (PST):
  • I just purchased a 1954 Ferguson tractor. I was told it is a TL30 -- but I find no reference on the WWW for a TL30. It has a 3PT, and a front end loader. Any help?
    Terry Johns wrote on Monday, December 06, 1999 (PST):
  • Recently restored 1949 TO-20, only missing items is muffler and tailpipe guard and original lights. anyone knowing of location of these and price. please e-mail thank you.
    steve demay wrote on Friday, November 19, 1999 (PST):
  • I have a 1950 model TO 20, in need of a crankshaft. If anyone has information on where I can find one, please E-mail me. Thank You
    GARY wrote on Tuesday, October 19, 1999 (PDT):
    Tom Adamson wrote on Monday, September 27, 1999 (PDT):
  • We have a Ferguson here we believe to be a 1948 TO-30, but we're told it may be a TO-20. I think the serial # is 55866. Could anyone shed some light on this? thank you.
    Robert Hosek wrote on Sunday, September 05, 1999 (PDT):
  • My uncle just brought me 2 Ferguson TO-20's to restore they are both in need of alot of repair . If anyone has a shop or owners manual for these tractors please e-mail me. The oldest tractor has a serial number of 423. I want to resore this one to near perfect condition. Thanks for any help.
    fran cecil wrote on Wednesday, August 11, 1999 (PDT):
  • my brother in bought an old fergie and the serial number is T0 -11610 I assume this is a 1949, can anyone help us?
    Steve Lewis wrote on Tuesday, August 03, 1999 (PDT):
  • I acquired a TO-20 about four years ago, and have done a great deal of restoration. It has been sitting in my garage for the past year or so as I picked up a John Deere to use daily. So, I don't know at this point if I will continue to restore or sell the tractor as is.
    James Herndon wrote on Sunday, July 11, 1999 (PDT):
  • I recently purchased a TE20. I had to replace the starter switch and the old switch had a spacer welded on the button. The new switch will not engage. I was wondering if there might be another way to solve this problem without welding another spacer on the switch.Any help would be greatly appreciated.
    James M. Madison wrote on Thursday, April 15, 1999 (PDT):
  • I have a TO-20 ferguson which my father bought new in 1949. It has many hours on it and is still used. The TO-20 is very similar to the ford 9N at the 2n, The TO-20 however is more powerful than the ford. This tractor has the overhead valve Z-120 continental engine which has been a very reliable engine over the years.

    Use This Form to Add Your Own Comments or Questions


    [Return to the Shed]

    Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F).  Expedited shipping available, just call!  Most prices for parts and manuals are below our competitors.  Compare our super low shipping rates!  We've kept the same low rate for six years.  We are a Company you can trust and have generous return policies!   Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]

    Home | Forums

    Copyright © 1997-2024 Yesterday's Tractor Co.

    All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others.

    TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within these website pages are the property of their respective trademark holders. None of these trademark holders are affiliated with, our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.