1924 Austin Bull Pup

My Fathers 1924 Austin Bull pup. Was use in his construction company. asphalt road roller. Ours also had a small blade mounted between front and rear wheels, the blade could be raised or lowered on ether side and could be turned left to right about a 45 degree angle. There is set of rippers mounted at the rear. There is a water tank mounted under the over head roof. Was parked in late 1950,s or early 1960's. Come early 1980's it Was towed about 15 miles to new parking place. 13 miles on pavment. While being towed clutch was pressed in and transmission in gauged 1st gear when clutch let out steel wheels slid on asphalt road for 2 seconds 2 ed attempt was made in 2 ed gear after 3 tries engine turned over. Back to Neutral for the ride home. A week later after cleaning rats out of chimney and radiator , a new gas line and some water it was then towed around the property as the advance/retard lever were moved it started and would run around on its own power. 100+ MPH winds tore off the roof. I now sets on a concrete pad in a small privet community. With my Dads name on it. Submitted by Austin Bull Pup, from CA